Steel for the reinforcement and prestressing of concrete - Test methods - Part 3: Prestressing steel (ISO 15630-3:2019, Corrected version 2019-10)

This document specifies test methods applicable to prestressing steel (bar, wire or strand) for concrete.
This document does not cover the sampling conditions that are dealt with in the product standards.
A list of options for agreement between the parties involved is provided in Annex A.

Stahl für die Bewehrung und das Vorspannen von Beton - Prüfverfahren - Teil 3: Spannstahl (ISO 15630-3:2019, korrigierte Fassung 2019-10)

Dieses Dokument legt die für Spannstahl (Stab, Draht oder Litze) für Beton in Betracht kommenden Prüfmethoden fest.
Dieses Dokument ist nicht für die Probeentnahme anwendbar. Diese wird in den Erzeugnisnormen festgelegt.
Eine Liste mit den Optionen, die von den Parteien vereinbart werden dürfen, ist in Anhang A enthalten.

Aciers pour l'armature et la précontrainte du béton - Méthodes d'essai - Partie 3: Aciers de précontrainte (ISO 15630-3:2019, Version corrigée 2019-10)

Le présent document spécifie les méthodes d'essai applicables aux aciers de précontrainte (barres, fils ou torons) pour le béton.
Le présent document ne couvre pas les conditions d'échantillonnage qui sont spécifiées dans les normes de produit.
Une liste d'options en vue d'un accord entre les parties concernées figure à l'Annexe A.

Jeklo za armiranje in prednapenjanje betona - Metode preskušanja - 3. del: Jeklo za prednapenjanje (ISO 15630-3:2019, popravljena različica 2019-10)

V tem dokumentu so navedene preskusne metode, ki se uporabljajo za jekleno prednapenjanje (palica, žica ali pramen) za beton.
Ta dokument ne zajema pogojev vzorčenja, ki so obravnavani v standardih za izdelke.
Seznam možnosti za dogovor med vpletenimi stranmi je podan v dodatku A.

General Information

Status
Published
Publication Date
05-Mar-2019
Withdrawal Date
29-Sep-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Mar-2019
Completion Date
06-Mar-2019

Relations

Buy Standard

Standard
EN ISO 15630-3:2019
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 15630-3:2019
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2019
1DGRPHãþD
SIST EN ISO 15630-3:2011
Jeklo za armiranje in prednapenjanje betona - Metode preskušanja - 3. del: Jeklo
za prednapenjanje (ISO 15630-3:2019)
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3:
Prestressing steel (ISO 15630-3:2019)
Stähle für die Bewehrung und das Vorspannen von Beton - Prüfverfahren - Teil 3:
Spannstähle (ISO 15630-3:2019)
Aciers pour l'armature et la précontrainte du béton - Méthodes d'essai - Partie 3: Aciers
de précontrainte (ISO 15630-3:2019)
Ta slovenski standard je istoveten z: EN ISO 15630-3:2019
ICS:
77.140.15 Jekla za armiranje betona Steels for reinforcement of
concrete
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15630-3
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2019
EUROPÄISCHE NORM
ICS 77.140.15 Supersedes EN ISO 15630-3:2010
English Version
Steel for the reinforcement and prestressing of concrete -
Test methods - Part 3: Prestressing steel (ISO 15630-
3:2019)
Aciers pour l'armature et la précontrainte du béton - Stähle für die Bewehrung und das Vorspannen von
Méthodes d'essai - Partie 3: Aciers de précontrainte Beton - Prüfverfahren - Teil 3: Spannstähle (ISO 15630-
(ISO 15630-3:2019) 3:2019)
This European Standard was approved by CEN on 26 November 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15630-3:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 15630-3:2019) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee CEN/TC 459/SC 4 “Concrete reinforcing and prestressing
steels” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15630-3:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15630-3:2019 has been approved by CEN as EN ISO 15630-3:2019 without any
modification.
INTERNATIONAL ISO
STANDARD 15630-3
Third edition
2019-02
Steel for the reinforcement and
prestressing of concrete — Test
methods —
Part 3:
Prestressing steel
Aciers pour l'armature et la précontrainte du béton — Méthodes
d'essai —
Partie 3: Aciers de précontrainte
Reference number
ISO 15630-3:2019(E)
©
ISO 2019
ISO 15630-3:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 15630-3:2019(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
4 General provisions concerning test pieces . 3
5 Tensile test . 4
5.1 Test piece . 4
5.2 Test equipment . 4
5.3 Test procedure . 4
5.3.1 General. 4
5.3.2 Determination of the modulus of elasticity . 5
6 Bend test . 6
6.1 Test piece . 6
6.2 Test equipment . 6
6.3 Test procedure . 6
6.4 Interpretation of test results . 7
7 Reverse bend test . 7
7.1 Test piece . 7
7.2 Test equipment . 7
7.3 Test procedure . 8
8 Wrapping test. 8
8.1 Test piece . 8
8.2 Test equipment . 8
8.3 Test procedure . 8
9 Isothermal stress relaxation test . 9
9.1 Principle of test . 9
9.2 Test piece . 9
9.3 Test equipment .10
9.3.1 Frame .10
9.3.2 Force-measuring device .10
9.3.3 Length-measuring device (extensometer) .10
9.3.4 Anchoring device .10
9.3.5 Loading device .10
9.4 Test procedure .10
9.4.1 Provisions concerning the test piece .10
9.4.2 Application of force .10
9.4.3 Initial force .11
9.4.4 Force during the test . . .11
9.4.5 Maintenance of strain .11
9.4.6 Temperature .12
9.4.7 Frequency of force recording .12
9.4.8 Frequency of strain recording .12
9.4.9 Duration of the test .
...


SLOVENSKI STANDARD
01-maj-2019
Nadomešča:
SIST EN ISO 15630-3:2011
Jeklo za armiranje in prednapenjanje betona - Metode preskušanja - 3. del: Jeklo
za prednapenjanje (ISO 15630-3:2019, popravljena različica 2019-10)
Steel for the reinforcement and prestressing of concrete - Test methods - Part 3:
Prestressing steel (ISO 15630-3:2019, Corrected version 2019-10)
Stahl für die Bewehrung und das Vorspannen von Beton - Prüfverfahren - Teil 3:
Spannstahl (ISO 15630-3:2019, korrigierte Fassung 2019-10)
Aciers pour l'armature et la précontrainte du béton - Méthodes d'essai - Partie 3: Aciers
de précontrainte (ISO 15630-3:2019, Version corrigée 2019-10)
Ta slovenski standard je istoveten z: EN ISO 15630-3:2019
ICS:
77.140.15 Jekla za armiranje betona Steels for reinforcement of
concrete
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15630-3
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2019
EUROPÄISCHE NORM
ICS 77.140.15 Supersedes EN ISO 15630-3:2010
English Version
Steel for the reinforcement and prestressing of concrete -
Test methods - Part 3: Prestressing steel (ISO 15630-
3:2019, Corrected version 2019-10)
Aciers pour l'armature et la précontrainte du béton - Stähle für die Bewehrung und das Vorspannen von
Méthodes d'essai - Partie 3: Aciers de précontrainte Beton - Prüfverfahren - Teil 3: Spannstähle (ISO 15630-
(ISO 15630-3:2019, Version corrigée 2019-10) 3:2019, korrigierte Fassung 2019-10)
This European Standard was approved by CEN on 26 November 2018.

This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 30 October 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE N O R M A L I S A T IO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15630-3:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 15630-3:2019) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee CEN/TC 459/SC 4 “Concrete reinforcing and prestressing
steels” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2019, and conflicting national standards
shall be withdrawn at the latest by September 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15630-3:2010.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 15630-3:2019, Corrected version 2019-10 has been approved by CEN as EN ISO 15630-
3:2019 without any modification.

INTERNATIONAL ISO
STANDARD 15630-3
Third edition
2019-02
Corrected version
2019-10
Steel for the reinforcement and
prestressing of concrete — Test
methods —
Part 3:
Prestressing steel
Aciers pour l'armature et la précontrainte du béton — Méthodes
d'essai —
Partie 3: Aciers de précontrainte
Reference number
ISO 15630-3:2019(E)
©
ISO 2019
ISO 15630-3:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 15630-3:2019(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
4 General provisions concerning test pieces . 3
5 Tensile test . 4
5.1 Test piece . 4
5.2 Test equipment . 4
5.3 Test procedure . 4
5.3.1 General. 4
5.3.2 Determination of the modulus of elasticity . 5
6 Bend test . 6
6.1 Test piece . 6
6.2 Test equipment . 6
6.3 Test procedure . 6
6.4 Interpretation of test results . 7
7 Reverse bend test . 7
7.1 Test piece . 7
7.2 Test equipment . 7
7.3 Test procedure . 8
8 Wrapping test. 8
8.1 Test piece . 8
8.2 Test equipment . 8
8.3 Test procedure . 8
9 Isothermal stress relaxation test . 9
9.1 Principle of test . 9
9.2 Test piece . 9
9.3 Test equipment .10
9.3.1 Frame .10
9.3.2 Force-measuring device .10
9.3.3 Length-measuring device (extensometer) .10
9.3.4 Anchoring device .10
9.3.5 Loading device .10
9.4 Test procedure .10
9.4.1 Provisions concerning the test piece .10
9.4.2 Application of force .10
9.4.3 Initial force .11
9.4.4 Force during the test . . .11
9.4.5 Maintenance of strain .11
9.4.6 Temperature .12
9.4.7 Frequency of force
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.