EN 12392:2000
(Main)Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment
This European standard specifies particular requirements applicable to wrought aluminium and aluminium alloys intended for the production of pressure equipment.
Aluminium und Aluminiumlegierungen - Kneterzeugnisse - Besondere Anforderungen an Erzeugnisse für die Fertigung von Druckgeräten
Diese Europäische Norm legt besondere Anforderungen und Prüfverfahren für Erzeugnisse aus Aluminium-Knetlegierungen fest, die zur Fertigung von Druckgeräten bestimmt sind.
Aluminium et alliages d'aluminium - Produits corroyés - Exigences particulières pour les produits destinés à la fabrication des appareils à pression
La présente norme européenne spécifie des exigences particulières applicables aux produits en aluminium et en alliages d'aluminium corroyés destinés à la fabrication d'appareils à pression.
Aluminij in aluminijeve zlitine - Gnetne zlitine - Posebne zahteve za aluminijeve izdelke za izdelavo naprav, ki delajo pod tlakom
General Information
- Status
- Withdrawn
- Publication Date
- 21-Mar-2000
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 7 - Sheets, strips and plates
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 09-Mar-2016
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 04-Jul-2012
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
EN 12258-1:2012 - Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
EN 2101:1991 - Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 12392:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment". This standard covers: This European standard specifies particular requirements applicable to wrought aluminium and aluminium alloys intended for the production of pressure equipment.
This European standard specifies particular requirements applicable to wrought aluminium and aluminium alloys intended for the production of pressure equipment.
EN 12392:2000 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12392:2000 has the following relationships with other standards: It is inter standard links to EN 12392:2016, EN 755-5:2008, EN 754-6:2008, EN 586-2:1994, EN ISO 8493:2004, EN 755-4:2008, EN 754-2:2024, EN 755-1:2016, EN 754-4:2008, EN 12258-1:2012, EN 755-2:2025, EN 485-4:1993, EN 754-3:2008, EN 2101:1991, EN 485-2:2016+A1:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12392:2000 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12392:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2002
Aluminij in aluminijeve zlitine - Gnetne zlitine - Posebne zahteve za aluminijeve
izdelke za izdelavo naprav, ki delajo pod tlakom
Aluminium and aluminium alloys - Wrought products - Special requirements for products
intended for the production of pressure equipment
Aluminium und Aluminiumlegierungen - Kneterzeugnisse - Besondere Anforderungen an
Erzeugnisse für die Fertigung von Druckge
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...