iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 459-1:2001/AC:2002

(Corrigendum)

Building lime - Part 1: Definitions, specifications and conformity criteria

Building lime - Part 1: Definitions, specifications and conformity criteria

2009-10-01: OD Citation flagged following request by ADC
DIN - Modification in Table C.1 and Annex ZA in German

Baukalk - Teil 1: Definitionen, Anforderungen und Konformitätskriterien

Chaux de construction - Partie 1: Définitions, spécifications et critères de conformité

Gradbeno apno – 1. del: Definicije, zahteve in merila skladnosti

General Information

Status
Withdrawn
Publication Date
23-Jul-2002
Withdrawal Date
07-Sep-2010
ICS
01.040.91 - Construction materials and building (Vocabularies)
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CEN/TC 51 - Cement and building limes
Drafting Committee
CEN/TC 51/WG 11 - Building lime
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
08-Sep-2010
Completion Date
08-Sep-2010
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/114 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on cements, buliding limes, and other hydr. binders
Ref Project
SIST EN 459-1:2002/AC:2004 - Building lime - Part 1: Definitions, specifications and conformity criteria

Relations

Corrects
EN 459-1:2001 - Building lime - Part 1: Definitions, specifications and conformity criteria
Effective Date
08-Jun-2022
Replaced By
EN 459-1:2010 - Building lime - Part 1: Definitions, specifications and conformity criteria
Effective Date
13-Sep-2010

Buy Standard

EN 459-1:2002/AC:2004EN 459-1:2002/AC:2004
PreviousNext
Corrigendum
EN 459-1:2002/AC:2004
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gradbeno apno – 1. del: Definicije, zahteve in merila skladnostiBaukalk - Teil 1: Definitionen, Anforderungen und KonformitätskriterienChaux de construction - Partie 1: Définitions, spécifications et criteres de conformitéBuilding lime - Part 1: Definitions, specifications and conformity criteria91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 459-1:2001/AC:2002SIST EN 459-1:2002/AC:2004en,fr,de01-januar-2004SIST EN 459-1:2002/AC:2004SLOVENSKI
STANDARD



SIST EN 459-1:2002/AC:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 459-1:2001/ACJuly 2002Juillet 2002Juli 2002ICS 01.040.91; 91.100.10English versionVersion FrançaiseDeutsche FassungBuilding lime - Part 1: Definitions, specifications and conformitycriteriaChaux de construction - Partie 1: Définitions, spécifications etcritères de conformitéBaukalk - Teil 1: Definitionen, Anforderungen undKonformitätskriterienThis corrigendum becomes effective on 24 July 2002 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 24 juillet 2002 pour incorporation dans les trois versionslinguistiques officielles de l'EN.Die Berichtigung tritt am 24.Juli 2002 zur Einarbeitung in die drei o
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13888-1:2022(Main)
Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling
SIST EN 13888-1:2022

This document is applicable to ceramic tile grouts for internal and external tile installations on walls and floors.
This document gives the terminology concerning the products, working methods (see Annex A), application properties, etc. for ceramic tile grouts.
This document specifies the performance requirements for cementitious and reaction resin grouts for ceramic tiles.
This document does not contain criteria or recommendations for the design and installation of ceramic tiles.
Ceramic tile grouts can also be used for other types of tiles (natural and agglomerated stones, etc.), where these do not adversely affect these materials.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16572:2015(Main)
Conservation of cultural heritage - Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage
SIST EN 16572:2015

This European Standard describes the terminology for mortars used in the field of cultural heritage.
NOTE   In addition to terms used in the three official CEN languages (English, French and German), this European Standard gives the equivalent terms in Dutch, Italian, Greek, Swedish and Spanish; these are published under the responsibility of the member body/National Committee for NEN, UNI, ELOT, SIS and AENOR and are given for information only. Only the terms and definitions given in the official languages can be considered as CEN terms and definitions.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14190:2014(Main)
Gypsum board products from reprocessing - Definitions, requirements and test methods
SIST EN 14190:2014

This European Standard specifies the characteristics and performance of products which have been produced by reprocessing gypsum boards manufactured according to EN 520, EN 15283 1 and EN 15283 2. Reprocessing may include cutting, perforating, edge profiling, decorating and laminating membranes of other materials for functional or decorative purposes, attaching fixings including supports e.g. for partitions. Examples of reprocessing operations are given in Annex B.
The products are intended for use in wall, ceiling and floor applications, where they may be fixed directly to the background, or they are used in systems assembled in conjunction with the structure to form separate or suspended linings. The products can be customized to fit the intended application offering a wide range of aesthetic, functional and decorative solutions of modular or non-modular design.
This European Standard does not cover gypsum board thermal/acoustic insulation composite panels according to EN 13950 and prefabricated gypsum board panels with a cellular paperboard core according to EN 13915.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 480-8:2012(Main)
Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content
SIST EN 480-8:2012

This European Standard describes a method for determining the conventional dry material content of an admixture.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15283-2:2008+A1:2009(Main + Amendment)
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
SIST EN 15283-2:2008+A1:2009

This European Standard specifies the characteristics and performance of gypsum fibre boards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster.
Gypsum fibre boards are selected for use according to their type, size, thickness and edge profile. The boards may be used for example, to provide dry lining finishes to walls, to fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses may be for floors and sheathing applications.
This European Standard covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength, and thermal resistance.
The following performance characteristics are linked to systems assembled with gypsum fibre boards: shear strength, fire resistance, impact resistance, direct airborne sound insulation, acoustic absorption. If required, tests have to be done according to the corresponding European test methods on assembled systems simulating the end use conditions.
This European Standard also covers additional technical characteristics that are of importance for the use and acceptance of the product and the reference tests for these characteristics.
It provides for evaluation of conformity of the product to this EN.
This European Standard does not cover gypsum fibre boards that have been subject to any secondary manufacturing operations (e.g. insulating composite panels, boards with thin lamination etc.).
Products covered by EN 520 or EN 13815 are excluded.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15283-1:2008+A1:2009(Main + Amendment)
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement
SIST EN 15283-1:2008+A1:2009

This European Standard specifies the characteristics and performance of gypsum boards with mat reinforcement intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster.
Gypsum boards with mat reinforcement are selected for use according to their type, size, thickness and edge profile. The boards can be used for example to provide dry lining finishes to walls, to fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses can be for floors, ventilation and smoke extraction ducts, cable trays and sheathing applications.
This European Standard covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength, and thermal resistance.
The following performance characteristics are linked to systems assembled with gypsum boards with mat reinforcement: shear strength, fire resistance, impact resistance, direct airborne sound insulation, acoustic absorption. If required, tests should be done according to the corresponding European test methods on assembled systems simulating the end use conditions.
This European Standard also covers additional technical characteristics that are of importance for the use and acceptance of the product and the reference tests for these characteristics. It provides for the evaluation of conformity of the product to this EN.
This European Standard does not cover gypsum boards with mat reinforcement which have been subject to any secondary manufacturing operations (e.g. insulating composite panels, boards with thin lamination etc.).
Products covered by EN 520 or EN 13815 are excluded.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 520:2004+A1:2009(Main + Amendment)
Gypsum plasterboards - Definitions, requirements and test methods
SIST EN 520:2005+A1:2009

This document specifies the characteristics and performance of gypsum plasterboards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster.
This document covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength (breaking load), impact resistance and thermal resistance.
The following performance characteristics are linked to systems assembled with plasterboards: shear strength, fire resistance, impact resistance, direct airborne sound insulation and acoustic absorption to be measured according to the corresponding European test methods. If required, tests should be done on assembled systems simulating the end use conditions.
This document covers also additional technical characteristics that are of importance for the use and acceptance of the product by the Construction Industry and the reference tests for these characteristics.
It provides for the evaluation of conformity of the product to this document.
This document does not cover plasterboards, which have been subject to any secondary manufacturing operations (e.g. insulating composite panels, plasterboards with thin lamination, etc.).

  • Standard
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13279-1:2008(Main)
Gypsum binders and gypsum plasters - Part 1: Definitions and requirements
SIST EN 13279-1:2008

This European Standard specifies the characteristics and performance of powder products based on gypsum binder for building purposes. This includes premixed gypsum building plasters for plastering of walls and ceilings inside buildings where they are applied as a finishing material which can be decorated. These products are specially formulated to meet their application requirements by the use of additives/admixtures, aggregates and other binders. Gypsum and gypsum based building plasters for manual and mechanical applications are included.
This European Standard also applies to gypsum binders both for direct use on site and for further processing into gypsum blocks, gypsum plasterboards, gypsum boards with fibrous reinforcement, gypsum fibrous plasterwork and gypsum ceiling elements. Gypsum mortar for internal not load bearing partitions not exposed to water is also included.
Calcium sulfate used as binder for floor screeds is not covered by this European Standard.
This European Standard defines the reference tests for technical characteristics and provides for the evaluation of conformity of the products covered by this European Standard.
Building lime, as calcium hydroxide, can be used as an additional binder together with gypsum binder. If gypsum binder is the principle active binding component in a plaster then this plaster is covered by this European Standard. If building lime is the principle active binding component in a plaster then the plaster is covered by EN 998-1.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13454-1:2004(Main)
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements
SIST EN 13454-1:2004

This document applies to calcium sulphate binders and composite binders made of calcium sulphate used for the manufacture of floor screeds for interior use in buildings. It also includes requirements for factory made mixtures made of calcium sulphate used for the manufacture of floor screeds which are given in EN 13813. This document does not cover the application of floor screeds. Floor screeds made with products covered by this document may contribute to thermal and sound insulation and fire protection of the floor.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13318:2000(Main)
Screed material and floor screeds - Definitions
SIST EN 13318:2002

This European Standard defines terms, which are used in the production and application of screed material and floor screeds. The terms are valid for all standards prepared by TC 303.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day