iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1097-1:2011

(Main)

Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)

Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)

This European Standard describes the reference method used for type testing and in case of dispute for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The sample is normally tested in a wet condition, but the test may also be carried out in a dry condition. This European Standard applies to natural, manufactured or recycled aggregates used in building or civil engineering.

Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 1: Bestimmung des Widerstandes gegen Verschleiß (Micro-Deval)

Diese Europäische Norm legt das für die Erstprüfung und in Streitfällen anzuwendende Referenzverfahren für
die Bestimmung des Widerstandes gegen Verschleiß von groben Gesteinskörnungen (Haupttext) und von
Gesteinskörnungen für Gleisschotter (Anhang A) fest. Für andere Zwecke, speziell im Rahmen der
werkseigenen Produktionskontrolle, dürfen andere Verfahren angewendet werden, sofern ein ausreichender
Zusammenhang zum Referenzverfahren nachgewiesen wurde. Die Probe wird üblicherweise in einem nassen
Zustand geprüft, die Prüfung darf aber in einem trockenen Zustand durchgeführt werden. Diese Europäische
Norm gilt für natürliche, künstliche oder wiederverwendbare Gesteinskörnungen, die im Bauwesen verwendet
werden.

Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 1: Détermination de la résistance à l'usure (micro-Deval)

La présente Norme européenne spécifie la méthode de référence utilisée pour les essais de type initiaux et,
en cas de litige, pour la détermination de la résistance à l'usure des gravillons (texte principal) et des
granulats de ballast de chemin de fer (Annexe A). Dans les autres cas, en particulier pour la maîtrise de la
production en usine, d’autres méthodes peuvent être utilisées sous réserve qu’une corrélation appropriée
avec la méthode de référence ait été établie. L’échantillon est normalement soumis à l’essai à l'état humide,
mais l’essai peut également être effectué à l’état sec. La présente Norme européenne s’applique à des
granulats naturels, artificiels ou recyclés utilisés dans le bâtiment ou le génie civil.

Preskusi mehanskih in fizikalnih lastnosti agregatov - 1. del: Določevanje odpornosti proti obrabi (mikro Deval)

Ta evropski standard opisuje referenčno metodo, ki se uporablja za tipsko preskušanje v primeru spora pri določevanju odpornosti grobih agregatov (osrednje besedilo) in gramoza za železnice proti obrabi (dodatek A). Za druge namene, zlasti za nadzor nad tovarniško proizvodnjo, se lahko uporabljajo druge metode pod pogojem, da je vzpostavljen primeren delovni odnos z referenčno metodo. Vzorec se običajno preskuša v vlažnih pogojih, vendar se lahko preskusi izvajajo tudi v suhih pogojih. Ta evropski standard velja za naravne, proizvedene in reciklirane agregate, ki se uporabljajo pri gradnji ali v gradbeništvu.

General Information

Status
Withdrawn
Publication Date
18-Jan-2011
Withdrawal Date
19-Dec-2023
ICS
91.100.15 - Mineral materials and products
Technical Committee
CEN/TC 154 - Aggregates
Drafting Committee
CEN/TC 154/SC 6 - Test methods
Current Stage
Mandate
M/125 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on aggregates
Ref Project
SIST EN 1097-1:2011 - Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)

Relations

Replaces
EN 1097-1:1996/A1:2003 - Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
Effective Date
22-Jan-2011
Replaces
EN 1097-1:1996 - Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
Effective Date
23-Mar-2009
Replaced By
EN 1097-1:2023 - Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
Effective Date
19-Jan-2023

Buy Standard

EN 1097-1:2011EN 1097-1:2011
PreviousNext
Standard
EN 1097-1:2011
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ORþHYDQMHPrüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 1: Bestimmung des Widerstandes gegen Verschleiß (Micro-Deval)Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 1: Détermination de la résistance à l'usure (micro-Deval)Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 1097-1:2011SIST EN 1097-1:2011en,fr,de01-marec-2011SIST EN 1097-1:2011SLOVENSKI
STANDARDSIST EN 1097-1:1999/A1:2004SIST EN 1097-1:19991DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1097-1
January 2011 ICS 91.100.15 Supersedes EN 1097-1:1996English Version
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 1: Détermination de la résistance à l'usure (micro-Deval)
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 1: Bestimmung des Widerstandes gegen Verschleiß (Micro-Deval) This European Standard was approved by CEN on 11 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1097-1:2011: ESIST EN 1097-1:2011

Determination of the resistance to wear (micro-Deval) of railway ballast .95Apparatus .96Preparation of the test specimens .97Test procedure .98Calculation and expression of results .99Test report . 10Annex B (informative)
Determination of micro-Deval coefficient in the dry condition . 11B.1Introduction . 11B.2Apparatus . 11B.3Preparation of sample for testing . 11B.4Test procedure . 11B.5Calculation and expression of results . 11B.6Report . 11Annex C (informative)
Alternative narrow range classification for the micro-Deval test . 129Test report . 12Annex D (informative)
Precision . 13Bibliography . 14 SIST EN 1097-1:2011

− Part 9: Determination of the resistance to wear by abrasion from studded tyres  Nordic test; − Part 10: Determination of water suction height. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1097-1:2011

laboratory sample reduced sample derived from a bulk sample for laboratory testing 3.4
constant mass mass determined by successive weightings performed at least 1 h apart and not differing by more than 0,1% NOTE In many cases, constant mass can be achieved after a test portion has been dried for a pre-determined period in a specified oven at (110 ± 5) °C. Test laboratories can determine the time required to achieve constant mass for specific types and sizes of sample dependent upon the drying capacity of the oven used. 4 Principle The test determines the micro-Deval coefficient which is the percentage of the original sample reduced to a size smaller than 1,6 mm during rolling. SIST EN 1097-1:2011

Key 1 drums 2 electric motor and reduction gearing 3 fixed shaft 4 frame 5 flexible coupling 6 drive wheel 7 cross section of a drum Figure 1 — Diagram of typical apparatus 5.2.2 It shall consist of one of four hollow drums, closed at one end, having an inside diameter of
(200 ± 1) mm and an internal length measured from the base to the inside of the lid of (154 ± 1) mm. The drums shall be made of stainless steel at least 3 mm thick which are placed on two shafts which rotate on a horizontal axis. 5.2.3 The insides of drums shall be free of protrusions resulting from welding or the method of attachment. The drums shall be closed by flat lids at least 8 mm thick and fitted with watertight and dust tight seals. 5.2.4 The abrasive charge shall consist of steel balls complying with ISO 3290-1 (10 ± 0,5) mm in diameter. NOTE The diameter of the balls can be checked quickly by passing them over parallel bars 9,5 mm apart. SIST EN 1097-1:2011
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1097-1:2023(Main)
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
SIST EN 1097-1:2024

This document specifies the reference method used for type testing and in case of dispute, for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A) by abrasion in the micro-Deval apparatus. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the relevant reference method has been established.
This document applies to natural, manufactured, recycled or lightweight (LWA) aggregates.
NOTE   This document does not apply to all types of LWA.
The reference test is performed with the addition of water. Annex B gives details of how the test can be performed without the addition of water.
Annex A specifies the method to determine the resistance to wear of aggregates for railway ballast without abrasive charge.
Annex C specifies the test performed with alternative narrow size fractions.
Annexes D and E specify methods for determining the wear of fine aggregates.
Precision data for the reference test method are given in Annex F.
Annex A is normative and Annexes B, C, D, E and F are informative.
WARNING – The use of this part of EN 1097 can involve hazardous materials, operations and equipment (such as dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of this document, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 933-6:2022(Main)
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
SIST EN 933-6:2023

This document specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography.
This document applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm. It does not apply to lightweight aggregates.
NOTE 1   For coarse aggregates between 4 mm and 20 mm, the flow coefficient is linked with the percentage of crushed or broken surfaces of an aggregate and can therefore be used in association with the method specified in EN 933-5. Shape and surface texture characteristics also influence the result.
NOTE 2   Experience of this test has been generally limited to natural aggregates.
Examples of test data sheets are given in informative Annexes A and C.
Annex B (informative) contains precision data.
WARNING - The use of this part of EN 933 can involve hazardous materials, operations and equipment (such as dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 933-5:2022(Main)
Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed particles in coarse and all-in natural aggregates
SIST EN 933-5:2023

This document specifies the reference method, used for type testing and in case of dispute, for the determination of the percentages of crushed particles, totally crushed particles and totally rounded particles in coarse and all-in natural aggregates. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established.
NOTE 1   Examples of advanced test methods can be found in the Bibliography.
This document applies to coarse aggregates comprising particles within size fraction 4/63 mm. It does not apply to lightweight aggregates.
NOTE 2   For coarse aggregate between 4 mm and 20 mm the percentages of crushed surfaces are linked to the flow coefficient and can therefore be used in association with the test method specified in EN 933 6.
Clause 7.1 specifies the procedure for test portions consisting of one size fraction and Clause 7.2 specifies the procedure for test portions consisting of two or more size fractions.
Guidance for the estimated mass of various size fractions with about 100 particles is given in informative Annex A.
Examples of application of the test procedure and an example of a test data sheet are given in informative Annexes B and C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1097-7:2022(Main)
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
SIST EN 1097-7:2023

This document specifies the reference method used for type testing and in cases of dispute for the determination of the particle density of filler by means of a pyknometer. For other purposes, in particular factory production control, other methods can be used provided that an appropriate working relationship with the reference method has been established.
NOTE   Methods for determination of particle density of aggregates are specified in EN 1097 6.
Annex A specifies the procedure for determination of the pyknometer volume. Annex B specifies the procedure for determination of the density of the liquid used to determine the particle density of the filler. Annexes A and B are normative.
WARNING — The use of this part of EN 1097 can involve hazardous materials, operations and equipment (such as liquids, dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 932-3:2022(Main)
Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description
SIST EN 932-3:2022

This document specifies a basic procedure for the identification of the petrographic type of natural aggregates. It applies for usual requirements for the procedure and terminology for simplified petrographic description. Precise petrographic identification, of technical mineralogy and petrography for civil engineering or specific end uses, requires further examination and is therefore excluded from the scope of this document.
NOTE 1 In principle, a qualified geologist (petrographer), with experience of materials used in civil engineering and aware of the composition of the deposit, has sufficient skills to sample and name the rock.
NOTE 2 For precise petrographic identification and technical requirements for specific applications, a non-exhaustive list of reference literature is given in the Bibliography.
This document applies only to natural aggregates. It is used to describe rocks and sediments. It does not apply to the description and identification of manufactured or recycled aggregates.
Informative Annex A provides guidance on the petrographic nomenclature by giving definitions of simple petrographic terms applicable to rock types used for aggregates.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 933-9:2022(Main)
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
SIST EN 933-9:2022

This document specifies the reference method used for type testing and in cases of dispute, for the determination of the methylene blue value of the size 0/2 mm fraction in fine aggregates or all-in aggregates (MB). It also specifies the reference method for the determination of the methylene blue value of the size 0/0,125 mm fraction (MBF) in normative Annex A. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the suitable reference method has been established.
Annex B specifies the preparation of 10 g/l methylene blue solution and Annex C specifies the procedure for the determination of the methylene blue value of kaolinite (MBk). Annexes B and C are normative.
A conformity check, adding a single quantity of dye solution equivalent to a specified limiting value and which can be used as part of a production control process, is described in informative Annex D.
An example of a test data sheet is given in informative Annex E.
WARNING – The use of this part of EN 933 can involve hazardous materials, operations and equipment (such as dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1097-6:2022(Main)
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
SIST EN 1097-6:2022

This document specifies the reference methods used for type testing and in case of dispute, for the determination of particle density and water absorption of normal weight and lightweight aggregates. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established. For convenience, some of these other methods are also described in this document.
The reference methods for normal weight aggregates are:
-   a wire basket method for aggregate particles retained on the 31,5 mm sieve (Clause 7, except for railway ballast which uses Annex B);
-   a pyknometer method for aggregate particles passing the 31,5 mm sieve and retained on the 4 mm sieve (Clause 8);
-   a pyknometer method for aggregate particles passing the 4 mm sieve and retained on the 0,063 mm sieve (Clause 9).
In Clauses 7, 8 and 9, three different particle densities (oven-dried particle density, saturated and surface-dried particle density and apparent particle density) and water absorption are determined after a soaking period of 24 h. In Annex B, the oven-dried particle density is determined after soaking in water to constant mass.
For aggregate particles passing the 31,5 mm sieve and retained on the 4 mm sieve, the wire basket method in Clause 7 can be used as an alternative to the pyknometer method in Clause 8.
NOTE 1   The wire basket method can also be used for single aggregate particles retained on the 63 mm sieve.
NOTE 2   The pyknometer method described in Clause 8 can be used as an alternative for aggregates passing the 4 mm sieve and retained on the 2 mm sieve.
The reference methods for lightweight aggregates are:
-   a pyknometer method for aggregate particles passing the 31,5 mm sieve and retained on the 4 mm sieve (Annex C). Three different particle densities (oven-dried; saturated and surface-dried; apparent) and water absorption are determined after pre-drying and a soaking period of 24 h;
-   a method, using a Büchner funnel, for aggregate particles passing the 4 mm sieve (Annex D). The three particle densities and water absorption are determined using a vacuum in the range of 50 mbar to 100 mbar for at least five minutes.
Three other methods for normal weight aggregates can be used to determine the pre-dried particle density, as specified in normative Annexes A and H:
-   a wire basket method for aggregate particles passing the 63 mm sieve and retained on the 31,5 mm sieve (A.3);
-   a pyknometer method for aggregate particles passing the 31,5 mm sieve and retained on the 0,063 mm sieve (A.4);
-   a pyknometer method for aggregate particles passing the 31,5 mm sieve, including the 0/0,063 mm size fraction (Annex H).
NOTE 3   If water absorption is less than about 1,5 %, the apparent particle density can be assessed using the pre-dried particle density method as defined in Annex A.
The quick method in normative Annex E can be used in factory production control to determine the apparent particle density of lightweight aggregates.
The method in informative Annex F can be used to determine the particle density and water absorption of aggregate particles passing the 4 mm sieve.
Data on the density of water at various temperatures is specified in normative Annex G.
Guidance on the significance and use of the various density and water absorption parameters is given in informative Annex I.
Precision data are presented in informative Annex J.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1744-4:2021(Main)
Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
SIST EN 1744-4:2022

This document specifies the procedure for the determination of the water susceptibility of fillers for bituminous mixtures, by separation of filler from a bitumen filler mixture.
A method for the determination of water susceptibility by volume increase and loss of stability of a Marshall specimen is described in Annex A.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 933-2:2020(Main)
Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
SIST EN 933-2:2020

This document specifies the nominal size of apertures for test sieves used for determination of particle size of aggregates.
It applies to:
a)   test sieves of perforated metal plate having square holes of size from 4 mm and up to 125 mm;
b)   test sieves of metal wire cloth having aperture sizes below 4 mm down to 0,063 mm.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17438:2020(Main)
Source materials considered in the development of the Aggregate standards of TC 154
SIST-TS CEN/TS 17438:2020

This document informs users about the source materials that have been considered in the development of the aggregate standards:
-   EN 12620 'Aggregates for concrete';
-   EN 13043 'Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked are-as';
-   EN 13139 'Aggregates for mortar';
-   EN 13242 'Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction';
-   EN 13383-1 'Armourstone - Part 1: Product standard';
-   EN 13450 'Aggregates for railway ballast';
-   EN 13055 'Lightweight aggregates';
Only source materials with a history of use in one or more member states are included in this document. It also specifies source material with a history of use for the scope of only one specific aggregate standard.

  • Technical specification
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day