EN 1097-1:1996
(Main)Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
This European Standard specifies a procedure for measuring the resistance to wear of a sample of aggregate. The sample is normally tested in a wet condition but the test may also be carried out in a dry condition. This European Standard applies to natural or artificial aggregates used in building or civil engineering.
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 1: Bestimmung des Widerstandes gegen Verschleiß (Micro-Deval)
Diese Europäische Norm legt einen Arbeitsablauf zum Messen des Abriebwiderstandes einer Probe einer Gesteinskörnung fest. Die Probe wird üblicherweise in Wasser beansprucht. Die Prüfung darf aber auch unter trockener Beanspruchung durchgeführt werden. Diese Europäische Norm findet Anwendung auf natürliche oder künstliche Gesteinskörnungen, die im Bauwesen verwendet werden.
Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 1: Détermination de la résistance à l'usure (micro-Deval)
La présente norme européenne décrit une méthode pour mesurer la résistance à l'usure d'un échantillon de granulats. En règle générale, l'échantillon est soumis à l'essai en présence d'eau, mais l'essai peut également être effectué à sec. La présente norme européenne s'applique aux granulats naturels et artificiels utilisés dans le bâtiment et les travaux publics.
Preskusi mehanskih in fizikalnih lastnosti agregatov - 1. del: Določevanje odpornosti proti obrabi (mikro Deval)
General Information
- Status
- Withdrawn
- Publication Date
- 23-Jul-1996
- Withdrawal Date
- 18-Jan-2011
- Technical Committee
- CEN/TC 154 - Aggregates
- Drafting Committee
- CEN/TC 154/SC 6 - Test methods
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 19-Jan-2011
- Completion Date
- 19-Jan-2011
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 23-Mar-2009
- Effective Date
- 28-Jan-2026
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN 1097-1:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)". This standard covers: This European Standard specifies a procedure for measuring the resistance to wear of a sample of aggregate. The sample is normally tested in a wet condition but the test may also be carried out in a dry condition. This European Standard applies to natural or artificial aggregates used in building or civil engineering.
This European Standard specifies a procedure for measuring the resistance to wear of a sample of aggregate. The sample is normally tested in a wet condition but the test may also be carried out in a dry condition. This European Standard applies to natural or artificial aggregates used in building or civil engineering.
EN 1097-1:1996 is classified under the following ICS (International Classification for Standards) categories: 91.100.15 - Mineral materials and products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1097-1:1996 has the following relationships with other standards: It is inter standard links to EN 1097-1:2011, EN 13450:2002, EN 1097-1:1996/A1:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1097-1:1996 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/125. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1097-1:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ORþHYDQMHPrüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 1: Bestimmung des Widerstandes gegen Verschleiß (Micro-Deval)Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 1: Détermination de la résistance a l'usure (micro-Deval)Tests for mechanical and physical properties of aggregates - Part 1: Determi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...