SIST EN 1097-1:2011
(Main)Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
This European Standard describes the reference method used for type testing and in case of dispute for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The sample is normally tested in a wet condition, but the test may also be carried out in a dry condition. This European Standard applies to natural, manufactured or recycled aggregates used in building or civil engineering.
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 1: Bestimmung des Widerstandes gegen Verschleiß (Micro-Deval)
Diese Europäische Norm legt das für die Erstprüfung und in Streitfällen anzuwendende Referenzverfahren für die Bestimmung des Widerstandes gegen Verschleiß von groben Gesteinskörnungen (Haupttext) und von Gesteinskörnungen für Gleisschotter (Anhang A) fest. Für andere Zwecke, speziell im Rahmen der werkseigenen Produktionskontrolle, dürfen andere Verfahren angewendet werden, sofern ein ausreichender Zusammenhang zum Referenzverfahren nachgewiesen wurde. Die Probe wird üblicherweise in einem nassen Zustand geprüft, die Prüfung darf aber in einem trockenen Zustand durchgeführt werden. Diese Europäische Norm gilt für natürliche, künstliche oder wiederverwendbare Gesteinskörnungen, die im Bauwesen verwendet werden.
Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 1: Détermination de la résistance à l'usure (micro-Deval)
La présente Norme européenne spécifie la méthode de référence utilisée pour les essais de type initiaux et,
en cas de litige, pour la détermination de la résistance à l'usure des gravillons (texte principal) et des
granulats de ballast de chemin de fer (Annexe A). Pour les besoins du contrôle de la production en usine en
particulier, d’autres méthodes peuvent être utilisées dans la mesure où une relation de fonctionnement
appropriée a été établie avec la méthode de référence. L’échantillon est normalement soumis à l’essai à l'état
humide, mais l’essai peut également être effectué à l’état sec. La présente Norme européenne s’applique à
des agrégats naturels, fabriqués ou recyclés utilisés dans le bâtiment ou le génie civil.
Preskusi mehanskih in fizikalnih lastnosti agregatov - 1. del: Določevanje odpornosti proti obrabi (mikro Deval)
Ta evropski standard opisuje referenčno metodo, ki se uporablja za tipsko preskušanje v primeru spora pri določevanju odpornosti grobih agregatov (osrednje besedilo) in gramoza za železnice proti obrabi (dodatek A). Za druge namene, zlasti za nadzor nad tovarniško proizvodnjo, se lahko uporabljajo druge metode pod pogojem, da je vzpostavljen primeren delovni odnos z referenčno metodo. Vzorec se običajno preskuša v vlažnih pogojih, vendar se lahko preskusi izvajajo tudi v suhih pogojih. Ta evropski standard velja za naravne, proizvedene in reciklirane agregate, ki se uporabljajo pri gradnji ali v gradbeništvu.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ORþHYDQMHPrüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 1: Bestimmung des Widerstandes gegen Verschleiß (Micro-Deval)Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 1: Détermination de la résistance à l'usure (micro-Deval)Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 1097-1:2011SIST EN 1097-1:2011en,fr,de01-marec-2011SIST EN 1097-1:2011SLOVENSKI
STANDARDSIST EN 1097-1:1999/A1:2004SIST EN 1097-1:19991DGRPHãþD
SIST EN 1097-1:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1097-1
January 2011 ICS 91.100.15 Supersedes EN 1097-1:1996English Version
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 1: Détermination de la résistance à l'usure (micro-Deval)
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 1: Bestimmung des Widerstandes gegen Verschleiß (Micro-Deval) This European Standard was approved by CEN on 11 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1097-1:2011: ESIST EN 1097-1:2011
EN 1097-1:2011 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Principle .45Apparatus .55.1General apparatus .55.2Additional apparatus required for the determination of the micro-Deval coefficient of aggregate .56Preparation of the test specimens .77Test procedure .78Calculation and expression of results .89Test report .8Annex A (normative)
Determination of the resistance to wear (micro-Deval) of railway ballast .95Apparatus .96Preparation of
...
SLOVENSKI STANDARD
kSIST FprEN 1097-1:2010
01-september-2010
3UHVNXVLPHKDQVNLKLQIL]LNDOQLKODVWQRVWLDJUHJDWRY%LVWYHQHOHPHQWGHO
'RORþHYDQMHRGSRUQRVWLSURWLREUDEL PLNUR'HYDO
Tests for mechanical and physical properties of aggregates - Main element - Part 1:
Determination of the resistance to wear (micro-Deval)
Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen
- Teil 1: Bestimmung des Widerstandes gegen Verschleiß (Micro-Deval)
Essais pour déterminer les caractéristiques mécaniques et physiques des granulats -
Partie 1: Détermination de la résistance à l'usure (micro-Deval)
Ta slovenski standard je istoveten z: FprEN 1097-1
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
kSIST FprEN 1097-1:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN 1097-1:2010
---------------------- Page: 2 ----------------------
kSIST FprEN 1097-1:2010
EUROPEAN STANDARD
FINAL DRAFT
FprEN 1097-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2010
ICS 91.100.15 Will supersede EN 1097-1:1996
English Version
Tests for mechanical and physical properties of aggregates -
Main element - Part 1: Determination of the resistance to wear
(micro-Deval)
Prüfverfahren für mechanische und physikalische
Eigenschaften von Gesteinskörnungen - Teil 1:
Bestimmung des Widerstandes gegen Verschleiß (Micro-
Deval)
This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical
Committee CEN/TC 154.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 1097-1:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST FprEN 1097-1:2010
FprEN 1097-1:2010 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle .4
5 Apparatus .5
5.1 Standard apparatus .5
5.2 Special apparatus .5
6 Preparation of the test specimens .7
7 Test procedure .7
8 Calculation and expression of results .8
9 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.