EN 13128:2001+A2:2009/AC:2010
(Corrigendum)Safety of machine tools - Milling machines (including boring machines)
Safety of machine tools - Milling machines (including boring machines)
2010-02-01 EMA: Consultants assigned following e-mail from PM received on 2010-02-01.
TC - Corrections in:
- Subclause 7.3 and Annex C of the E reference version;
- Subclauses 5.2 and 7.3 of the F reference version;
- Subclause 5.2 and Annex C of the D reference version.
Sicherheit von Werkzeugmaschinen - Fräsmaschinen (einschließlich Bohr-Fräsmaschinen)
Sécurité des machines-outils - Fraiseuses (comprenant les aléseuses)
Varnost obdelovalnih strojev - Frezalni stroji (vključno z vrtalnimi stroji)
1.1 Ta standard opredeljuje zahteve in ukrepe za tehnično varnost, ki jih morajo uporabiti osebe, ki se ukvarjajo z načrtovanjem, gradnjo in dobavo (vključno z namestitvijo in razstavljanjem, z ureditvijo prevoza in vzdrževanja) frezalnih strojev (glej 3.1), vključno s stroji, ki lahko opravljajo operacije vrtanja (glej 3.5). Stroji, ki jih zajema ta standard, zajemajo, a niso omejeni na:
- konzolne in vertikalne frezalne stroje (glej sliki C.1, C.2);
- posteljne frezalne stroje (glej sliko C.3);
- večvretenske frezalne stroje (glej sliki C.4 in C.5);
- frezalne stroje za plano rezkanje (glej sliki C.4 in C.5);
- kopirne in konturne frezalne stroje (glej sliko C.6),
- frezalne in vrtalne stroje (glej sliko C.7).
1.2 Ta standard upošteva nameravano uporabo, vključno z razumno predvidljivo napačno uporabo, vzdrževanjem, čiščenjem, in operacijami nastavitve. Predpostavlja dostop do stroja z vseh strani. Opisuje načine za zmanjšanje tveganj za upravljalce in druge izpostavljene osebe.
1.3 Ta standard se uporablja tudi za naprave za prenos obdelovanca, kadar tvorijo sestavni del stroja. 1.4 Ta standard obravnava vse velike nevarnosti v zvezi s frezalnimi stroji, kadar se uporabljajo v skladu z namembnostjo in pod pogoji, kot jih je predvidel proizvajalec (glej Klavzulo 4).
1.5 Nevarnosti, ki izhajajo iz drugih postopkov obdelave kovin (npr. brušenja, struženja, oblikovanja, elektroerozije - EDM, laserske obdelave), so zajete v drugih standardih (glej bibliografijo).
1.6 Ta standard ne zajema frezalnih strojev z zmogljivostjo avtomatske menjave orodja (glej prEN 12417:1996).
1.7 Ta evropski standard se ne uporablja za frezalne stroje, ki so bili izdelani pred datumom, ko je CEN objavil ta standard.
General Information
- Status
- Withdrawn
- Publication Date
- 09-Mar-2010
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 143 - Machine tools - Safety
- Drafting Committee
- CEN/TC 143/WG 4 - Machining centres, etc. - Safety
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 04-Apr-2018
- Completion Date
- 21-Jan-2026
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 16-Sep-2015
- Corrects
EN 13128:2001+A2:2009 - Safety of machine tools - Milling machines (including boring machines) - Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 13128:2001+A2:2009/AC:2010 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Safety of machine tools - Milling machines (including boring machines)". This standard covers: 2010-02-01 EMA: Consultants assigned following e-mail from PM received on 2010-02-01. TC - Corrections in: - Subclause 7.3 and Annex C of the E reference version; - Subclauses 5.2 and 7.3 of the F reference version; - Subclause 5.2 and Annex C of the D reference version.
2010-02-01 EMA: Consultants assigned following e-mail from PM received on 2010-02-01. TC - Corrections in: - Subclause 7.3 and Annex C of the E reference version; - Subclauses 5.2 and 7.3 of the F reference version; - Subclause 5.2 and Annex C of the D reference version.
EN 13128:2001+A2:2009/AC:2010 is classified under the following ICS (International Classification for Standards) categories: 25.080.20 - Boring and milling machines. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13128:2001+A2:2009/AC:2010 has the following relationships with other standards: It is inter standard links to EN ISO 16090-1:2018, EN 13128:2001+A2:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13128:2001+A2:2009/AC:2010 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC, 98/37/EC; Standardization Mandates: M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13128:2001+A2:2009/AC:2010 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Werkzeugmaschinen - Fräsmaschinen (einschließlich Bohr-Fräsmaschinen)Sécurité des machines-outils - Fraiseuses (comprenant les aléseuses)Safety of machine tools - Milling machines (including boring machines)25.080.20FrezalnikiBoring and milling machinesICS:Ta slovenski standard je istoveten z:EN 13128:2001+A2:2009/AC:2010SIST EN 13128:2002+A2:2009/AC:2010en,fr,de01-maj-2010SIST EN 13128:2002+A2:2009/AC:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13128:2001+A2:2009/AC
March 2010
Mars 2010
März 2010 ICS 25.080.20 English version Version Française Deutsche Fassung
Safety of machine tools - Milling machines (including boring machines)
Sécurité des machines-outils - Fraiseuses (comprenant les aléseuses)
Sicherheit von Werkzeugmaschinen - Fräsmaschinen (einschließlich Bohr-Fräsmaschinen) This corrigendum becomes effective on 10 March 2010 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 10 mars 2010 pour incorporation dans les trois versions linguistiques officielles de la EN.
Die Berichtigung tritt am 10.Mä
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...