prEN ISO 15614-2

SLOVENSKI STANDARD
oSIST prEN ISO 15614-2:2022
01-julij-2022
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega
postopka - 2. del: Obločno varjenje aluminija in njegovih zlitin (ISO/DIS 15614-
2:2022)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 2: Arc welding of aluminium and its alloys (ISO/DIS 15614-2:2022)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 2: Lichtbogenschweißen von Aluminium und seinen
Legierungen (ISO/DIS 15614‑2:2022)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 2:
Soudage à l'arc de l'aluminium et de ses alliages (ISO/DIS 15614-2:2022)
Ta slovenski standard je istoveten z: prEN ISO 15614-2
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
oSIST prEN ISO 15614-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 15614-2:2022

---------------------- Page: 2 ----------------------
oSIST prEN ISO 15614-2:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15614-2
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-06-06 2022-08-29
Specification and qualification of welding procedures for
metallic materials — Welding procedure test —
Part 2:
Arc welding of aluminium and its alloys
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques — Épreuve de
qualification d'un mode opératoire de soudage —
Partie 2: Soudage à l'arc de l'aluminium et de ses alliages
ICS: 25.160.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15614-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 15614-2:2022
ISO/DIS 15614-2:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2022 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 15614-2:2022
ISO/DIS 15614-2:2022(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Preliminary welding procedure specification (pWPS) .3
5 Welding procedure test .
...