iTeh Standards logo
EURUSD
Your shopping cart is empty.

21.060.40 - Rivets

ICS 21.060.40 Details

Rivets

Niete

Rivets

Kovice

General Information

Parent
21.060 - Fasteners

Frequently Asked Questions

ICS 21.060.40 is a classification code in the International Classification for Standards (ICS) system. It covers "Rivets". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.

There are 86 standards classified under ICS 21.060.40 (Rivets). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.

The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.

e-Library Subscription

Create subscription and get permanent access to documents within 21.060.40 - Rivets

Type
Monthly Subscription
for
seat
×
$ 123.03
$ 123.03

Currently subscription includes documents marked with .We are working on making all documents available within the subscription.

Standardization Organization
Technical Committee
Directive
Mandate
50
ASTM
ASTM A502-24(Specification)
Standard Specification for Rivets, Steel, Structural

ABSTRACT
This specification covers the chemical composition, mechanical (Brinell hardness), dimensional, and visual inspection requirements, and associated test methods for steel rivets used for structural fabricating purposes. The steel used to make the rivets shall be manufactured by the open-hearth, basic-oxygen, or electric-furnace process, and the corresponding rivets shall be made by the hot or cold heading process and are expected to be hot driven. The rivets are available in the following grades: Grade 1, carbon steel rivets for general purpose use; Grade 2, carbon manganese steel rivets for use with high strength carbon and high strength low alloy structural steels; and Grade 3, weathering steel rivets.
SCOPE
1.1 This specification covers three grades of steel rivets in diameters from 1/2 to 11/2 in. inclusive, for structural fabricating purposes. The grades are as follows:    
Grade  
Description  
1  
Carbon steel rivets for general purpose use  
2  
Carbon manganese steel rivets for use with high strength carbon and high strength low alloy structural steels    
3  
Weathering steel rivets  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
SIST
SIST EN 6101:2023(Main)
Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series
EN 6101:2022

This document specifies the dimensions, tolerances and mass of rivets with 100° medium flush head, close tolerance, inch series, for aerospace application.

  • Standard
    15 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN 6081:2023(Main)
Aerospace series - Rivet, universal head, close tolerance - Inch series
EN 6081:2022

This document specifies the dimensions, tolerances and mass of rivets with universal head, close tolerance, inch series, for aerospace application.

  • Standard
    14 pages
    English language
    e-Library read for
    1 day
CEN
EN 6069:2022(Main)
Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series
SIST EN 6069:2023

This document specifies the dimensions, tolerances and mass of rivets with 100° reduced flush head, close tolerance, inch series, for aerospace applications.

  • Standard
    14 pages
    English language
    e-Library read for
    1 day
ASTM
ASTM B316/B316M-20(Specification)
Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

ABSTRACT
This specification covers wire and rod in the alloys and the tempers suitable for manufacturing rivets and other similar items by cold-heading operations. The products covered by this specification shall be produced by extruding, rolling, or drawing, or a combination thereof, at the option of the producer. For heat-treated tempers, an inspection lot shall consist of an identifiable quantity of material of the same mill form, alloy, temper, and nominal diameter traceable to a heat-treat lot or lots, and subjected to inspection at one time. On the other hand, an inspection lot shall consist of an identifiable quantity of material of the same mill form, alloy, temper, and nominal diameter subjected to inspection for non heat-treated tempers. Samples for chemical analysis shall be taken from the material by drilling, sawing, milling, turning, or clipping a representative piece or pieces to obtain a prepared sample. One tension test per specimen shall be taken. Resistance to stress corrosion cracking for each lot of specimen shall be established by testing the previously selected tension-test samples for lot acceptance purposes. Variations from the specified diameter, length, and straightness shall not exceed the permissible variations prescribed. The material shall be supplied in the mill finish and shall conform by the requirements of this specification and shall be commercially sound.
SCOPE
1.1 This specification covers wire and rod in the alloys (Note 1) shown in Table 1 and the tempers shown in Table 2 [Table 3] and Table 4 [Table 5], suitable for manufacturing rivets and other similar items by cold-heading operations.  
Note 1: Throughout this specification the use of the term alloy  in the general sense includes aluminum as well as aluminum alloy.
Note 2: For rolled or cold-finished wire and rod, see Specification B211, and for extruded wire and rod, see Specification B221.  
1.2 Alloy and temper designations are in accordance with ANSI H35.1/H35.1M. The equivalent Unified Numbering System alloy designations are those of Table 1 preceded by A9, for example, A91100 for aluminum 1100 in accordance with Practice E527.  
1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys in this specification, see Annex A2.  
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.  
1.4.1 The SI units are shown either in brackets or in separate tables.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    8 pages
    English language
    sale 15% off
  • Technical specification
    8 pages
    English language
    sale 15% off
ASTM
ASTM A31-14(2020)(Specification)
Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

ABSTRACT
This specification covers the chemical, mechanical, and dimensional requirements, and associated test methods for steel rivets for use in boilers and pressure vessels, and steel bars for use in the manufacture of such rivets. Two grades of steel are covered here, as follows: Grade A and Grade B. The steel used to make the rivets shall be manufactured by open-hearth, electric-furnace, or basic-oxygen process, and the corresponding rivets shall be manufactured from steel bars conforming to the applicable bar grade ordered. The steel shall undergo heat and product analysis for measurements of chemical contents for carbon, manganese, phosphorus, and sulfur. Finished bars and rivets shall go through rivet bend, rivet flattening, bar tensile, and bar bend tests for measurements of mechanical properties such as ratio of bend diameter to diameter of the shank for rivets, and tensile strength, yield point, elongation, and ratio of bend diameter to diameter of specimen for bars.
SCOPE
1.1 This specification2 covers steel rivets for use in boilers and pressure vessels and steel bars for use in the manufacture of rivets.  
1.2 Two grades are covered:  
1.2.1 Grade A—Bars having a yield point of 23 000 psi (160 MPa) minimum with carbon 0.18 % maximum.  
1.2.2 Grade B—Bars having a yield point of 29 000 psi (200 MPa) minimum with carbon 0.28 % maximum.  
1.2.3 Rivets are manufactured from the applicable bar grade.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F3329-18(Specification)
Standard Specification for Carbon and Alloy Steel Metric Rivets

SCOPE
1.1 This specification covers chemical and mechanical requirements for nine property classes of carbon and alloy steel metric rivets in nominal diameters M01 through M36 suited for use in general engineering applications.  
1.2 This specification does not cover dimensional requirements for rivets of any property class. When referencing this specification for procurement purposes, it is mandatory that size, type, style, and any special dimensions of the product be additionally specified.  
1.2.1 In case of any conflict in requirements, the requirements of the individual product specification shall take precedence over those of this general specification.  
1.2.2 The purchaser may specify additional requirements which do not negate any of the provisions of this general specification or of the individual product specification. Such additional requirements, the acceptance of which are subject to negotiation with the supplier, must be included in the order information (see Section 3).  
1.3 When agreed on by the purchaser, Class 5.8 fasteners may be supplied when either Classes 4.6 or 4.8 are ordered; Class 4.8 may be supplied when Class 4.6 is ordered;  
1.4 The product size range for which each property class is applicable is given in Table 1 on chemical composition requirements, and the mechanical requirements table (see Table 2).  
1.5 Appendix X1 explains the significance of the property class designation numerals.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
SIST
SIST EN ISO 15975:2003(Main)
Closed end blind rivets with break pull mandrel and protrudiing head - AI/AIA (ISO 15975:2002)
EN ISO 15975:2002

ISO 15975 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (Al) and an aluminium alloy mandrel (AlA) and with nominal diameters from 3,2 mm up to and including 4,8 mm.

  • Standard
    8 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 15981:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)
EN ISO 15981:2002

ISO 15981 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 15984:2003(Main)
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
EN ISO 15984:2002

ISO 15984 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

  • Standard
    8 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 15980:2003(Main)
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
EN ISO 15980:2002

ISO 15980 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 15976:2003(Main)
Closed end blind rivets with break pull mandrel and protrudiing head - St/St (ISO 15976:2002)
EN ISO 15976:2002

ISO 15976 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and an steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    8 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 16583:2003(Main)
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
EN ISO 16583:2002

ISO 16583 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 16582:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
EN ISO 16582:2002

ISO 16582 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 15983:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
EN ISO 15983:2002

ISO 15983 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 15978:2003(Main)
Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
EN ISO 15978:2002

ISO 15978 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body and a steel mandrel with nominal diameters from 2,4 mm up to and including 5 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 16585:2003(Main)
Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)
EN ISO 16585:2002

ISO 16585 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    8 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 15977:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
EN ISO 15977:2002

ISO 15977 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 15979:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
EN ISO 15979:2002

ISO 15979 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 16584:2003(Main)
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)
EN ISO 16584:2002

ISO 16584 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a steel (St) or stainless steel (SSt) mandrel and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
SIST
SIST EN ISO 15982:2003(Main)
Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)
EN ISO 15982:2002

ISO 15982 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15977:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
SIST EN ISO 15977:2003

ISO 15977 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15975:2002(Main)
Closed end blind rivets with break pull mandrel and protrudiing head - AI/AIA (ISO 15975:2002)
SIST EN ISO 15975:2003

ISO 15975 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (Al) and an aluminium alloy mandrel (AlA) and with nominal diameters from 3,2 mm up to and including 4,8 mm.

  • Standard
    8 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15979:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
SIST EN ISO 15979:2003

ISO 15979 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15982:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)
SIST EN ISO 15982:2003

ISO 15982 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15984:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
SIST EN ISO 15984:2003

ISO 15984 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

  • Standard
    8 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15981:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)
SIST EN ISO 15981:2003

ISO 15981 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 16585:2002(Main)
Closed end blind rivets Closed end blind rivets with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)with pull mandrel and protruding head - A2/SSt (ISO 16585:2002)
SIST EN ISO 16585:2003

ISO 16585 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    8 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15978:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
SIST EN ISO 15978:2003

ISO 15978 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body and a steel mandrel with nominal diameters from 2,4 mm up to and including 5 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 16582:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002)
SIST EN ISO 16582:2003

ISO 16582 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 16583:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt (ISO 16583:2002)
SIST EN ISO 16583:2003

ISO 16583 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15983:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - A2/A2 (ISO 15983:2002)
SIST EN ISO 15983:2003

ISO 15983 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 16584:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt (ISO 16584:2002)
SIST EN ISO 16584:2003

ISO 16584 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a steel (St) or stainless steel (SSt) mandrel and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15976:2002(Main)
Closed end blind rivets with break pull mandrel and protrudiing head - St/St (ISO 15976:2002)
SIST EN ISO 15976:2003

ISO 15976 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and an steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    8 pages
    English language
    e-Library read for
    1 day
CEN
EN ISO 15980:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002)
SIST EN ISO 15980:2003

ISO 15980 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    9 pages
    English language
    e-Library read for
    1 day
ISO
ISO 15984:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - A2/A2

ISO 15984 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 15980:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - St/St

ISO 15980 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 15975:2002(Main)
Closed end blind rivets with break pull mandrel and protruding head - AI/AIA

ISO 15975 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a commercially pure aluminium body (Al) and an aluminium alloy mandrel (AlA) and with nominal diameters from 3,2 mm up to and including 4,8 mm.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 15976:2002(Main)
Closed end blind rivets with break pull mandrel and protruding head - St/St

ISO 15976 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with a steel body (St) and an steel mandrel (St) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 15979:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - St/St

ISO 15979 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a steel body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 15983:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - A2/A2

ISO 15983 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an austenitic stainless steel body (A2) and an austenitic stainless steel mandrel (A2) and with nominal diameters from 3 mm up to and including 5 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 15977:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - AIA/St

ISO 15977 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body and a steel mandrel and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 15981:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - AIA/AIA

ISO 15981 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 15982:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA

ISO 15982 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body (AlA) and an aluminium alloy mandrel (AlA) and with nominal diameters from 2,4 mm up to and including 6,4 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 16583:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt

ISO 16583 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 16585:2002(Main)
Closed end blind rivets with pull mandrel and protruding head - A2/SSt

ISO 16585 specifies dimensional and mechanical characteristics and application data for closed end blind rivets with break pull mandrel and protruding head, with an austenitic stainless-steel body (A2) and a stainless-steel mandrel (SSt) and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    5 pages
    English language
    sale 15% off
  • Standard
    5 pages
    French language
    sale 15% off
ISO
ISO 16582:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt

ISO 16582 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and protruding head, with a copper body (Cu) and either a steel (St) or a bronze (Br) or a stainless steel (SSt) mandrel and with nominal diameters from 3 mm up to and including 4,8 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 16584:2002(Main)
Open end blind rivets with break pull mandrel and protruding head - NiCu/St or NiCu/SSt

ISO 16584 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel, protruding head, with a nickel copper body (NiCu) and either a steel (St) or stainless steel (SSt) mandrel and with nominal diameters from 3,2 mm up to and including 6,4 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
ISO
ISO 15978:2002(Main)
Open end blind rivets with break pull mandrel and countersunk head - AIA/St

ISO 15978 specifies dimensional and mechanical characteristics and application data for open end blind rivets with break pull mandrel and countersunk head, with an aluminium alloy body and a steel mandrel with nominal diameters from 2,4 mm up to and including 5 mm.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    French language
    sale 15% off
SIST
SIST EN ISO 14589:2002(Main)
Blind rivets - Mechanical testing (ISO 14589:2000)
EN ISO 14589:2000

Migrated from Progress Sheet (TC Comment) (2000-07-10): Accepted to go parallel with ISO, but as there is not yet a document reference ++ we have to wait before we can add it.

  • Standard
    17 pages
    English language
    e-Library read for
    1 day
50