This document specifies requirements and their test methods for tissue punches used with a handpiece in dentistry especially for oral surgical implant procedures, such as cutting holes or notches in and removing of gingival tissue. It also specifies the requirements for their marking and labelling.

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Draft
      5 pages
      English language

This document specifies dimensions and performance requirements for excavators used in dentistry.

    • sale 15% off
    • Standard
      11 pages
      English language
    • sale 15% off
    • Standard
      12 pages
      French language
    • sale 15% off
    • Draft
      11 pages
      English language
    • sale 15% off
    • Draft
      12 pages
      French language

This document specifies requirements and test methods for hand-held and mechanically operated
instruments used for shaping and cleaning root canals, and which are not specified in other parts of the
ISO 3630 series.
This document specifies requirements for size, marking, product designation, safety considerations,
labelling and packaging.

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This document is one of a series of standards describing the characteristics for identification cards as defined in the definitions clause and the use of such cards for international interchange.
This document specifies requirements for a high coercivity magnetic stripe (including any protective overlay) on an identification card and encoding technique. It takes into consideration both human and machine aspects and states minimum requirements.
Coercivity influences many of the quantities speci...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and their test methods for stainless steels used in
dental instruments.
It is applicable to single-use and reusable instruments, regardless of whether they are connected to a
power-driven system or not.
It contains a current selection of stainless steels suitable for use in the manufacture of dental
instruments.

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements, test methods, instructions for use and marking for multifunction handpieces (colloquially called "syringes") intended to be used in the oral cavity of the patient. This document does not apply to dental handpieces and motors, intraoral cameras, dental polymerisation lamps, powered scalers, powder jet handpieces, prophy handpieces, suction cannulas and saliva ejectors.

    • sale 15% off
    • Standard
      18 pages
      English language
    • sale 15% off
    • Standard
      19 pages
      French language

EN-ISO 7782-2 specifies dimensional and other requirements for the 11 most commonly used carbide cutters which are predominantly used in the dental laboratory.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements and test methods for metallic dental tweezers of the Meriam type and for College type.
This document is not applicable to anatomical tweezers and surgical tweezers.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements and test methods for endodontic instruments used for endodontic purposes, e.g. enlargers, compactors, accessory instruments, shaping and cleaning instruments, and a numeric coding system. In addition, it covers general size designations, color-coding, packaging, and identification symbols.

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

This document specifies general requirements and test methods for endodontic instruments used for endodontic purposes, e.g. enlargers, compactors, accessory instruments, shaping and cleaning instruments, and a numeric coding system. In addition, it covers general size designations, color-coding, packaging, and identification symbols.

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day

2019-01-21: Parallel process missed, so adoption of published ISO

    • sale 10% off
    • Amendment
      11 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Amendment
      8 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and test methods for reusable intra-oral mirrors with a coated
glass reflecting surface used for dental purposes in the oral cavity.
In addition, specific requirements for metallic casing and metallic handles are given.

    • sale 10% off
    • Standard
      19 pages
      English language
    • e-Library read for
      1 day

ISO 9687:2015 specifies graphical symbols for dental equipment. It is intended that the symbols are to be used on the appropriate piece of dental equipment and in documents pertaining to dental equipment, for example in instructions for use, marking, labelling, and technical product documentation.

    • sale 10% off
    • Amendment
      7 pages
      English language
    • e-Library read for
      1 day

ISO 21533:2018 specifies requirements and test methods for reprocessable cartridge syringes intended for intraligamentary injections.
ISO 21533:2018 specifies requirements for cartridge syringes with ISO metric thread sizes, and only intended for intraligamentary injections. However, attention is drawn to the existence of a variety of syringes with imperial thread sizes (see Annex A).

    • sale 10% off
    • Standard
      15 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and test methods for handpieces and motors used in dentistry
for treatment of patients and having patient contact, regardless of their construction. It also specifies
requirements for manufacturer’s information, marking and packaging.
This document is applicable to the following:
a) straight and angle handpieces;
b) high-speed air turbine handpieces;
c) air motors;
d) electrical motors;
e) prophy handpieces.
This document is not applicable to the fol...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

ISO 14457:2017 specifies requirements and test methods for handpieces and motors used in dentistry for treatment of patients and having patient contact, regardless of their construction. It also specifies requirements for manufacturer's information, marking and packaging.
ISO 14457:2017 is applicable to the following:
a) straight and angle handpieces;
b) high-speed air turbine handpieces;
c) air motors;
d) electrical motors;
e) prophy handpieces.
ISO 14457:2017 is not applicable to the fo...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

ISO 14457:2017 specifies requirements and test methods for handpieces and motors used in dentistry for treatment of patients and having patient contact, regardless of their construction. It also specifies requirements for manufacturer's information, marking and packaging. ISO 14457:2017 is applicable to the following: a) straight and angle handpieces; b) high-speed air turbine handpieces; c) air motors; d) electrical motors; e) prophy handpieces. ISO 14457:2017 is not applicable to the following...view more

    • sale 15% off
    • Standard
      34 pages
      English language
    • sale 15% off
    • Standard
      35 pages
      French language

This International Standard specifies requirements and test methods for filling instruments with working ends with contra set, used for the restoration of teeth with plastic filling materials. It also specifies requirements for their design, dimensions and marking.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies requirements and their test methods for sinus elevator used in dentistry especially for lateral approach of sinus floor elevation. It also specifies the requirements for their marking and labelling.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements for dimensions and material properties of shanks used
in dentistry for rotary or oscillating instruments. It describes the measurement methods for the
verification of the requirements.
This document is not applicable to tips fixed to the handpiece with a screw, e.g. scaler tips.
Information about the location of marking is also given. Annex A on quality control is included in order
to ensure a high quality level.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

This document specifies dimensional and other requirements for the three most commonly used
carbide cutters for milling machines which are predominantly used in the dental laboratory.
Other characteristics of laboratory cutters (for example, spiralled blades or cross-cut) are not covered
by this document.
Cutters intended for use with CAD/CAM systems are excluded from the scope of this document.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

ISO 19490:2017 specifies requirements and their test methods for sinus membrane elevators used during the placement of dental implants for sinus floor lifting. It also specifies the requirements for their marking and labelling.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

ISO 19715:2017 specifies requirements and test methods for a filling instrument with contra angle, which is used for the restoration of teeth via the application of polymer-based restorative materials and cements. It also specifies requirements for the design, dimensions and marking.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

ISO 1797:2017 specifies the requirements for dimensions and material properties of shanks used in dentistry for rotary or oscillating instruments. It describes the measurement methods for the verification of the requirements.
ISO 1797:2017 is not applicable to tips fixed to the handpiece with a screw, e.g. scaler tips.
Information about the location of marking is also given. Annex A on quality control is included in order to ensure a high quality level.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

ISO 7787-3:2017 specifies dimensional and other requirements for the three most commonly used carbide cutters for milling machines which are predominantly used in the dental laboratory.
Other characteristics of laboratory cutters (for example, spiralled blades or cross-cut) are not covered by this document.
Cutters intended for use with CAD/CAM systems are excluded from the scope of this document.

    • sale 10% off
    • Standard
      14 pages
      English language
    • e-Library read for
      1 day

ISO 19490:2017 specifies requirements and their test methods for sinus membrane elevators used during the placement of dental implants for sinus floor lifting. It also specifies the requirements for their marking and labelling.

    • sale 15% off
    • Standard
      5 pages
      English language
    • sale 15% off
    • Standard
      5 pages
      French language

ISO 9173-1:2016 specifies the general performance requirements for extraction forceps used in dentistry.

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

ISO 3964:2016 specifies the coupling between handpieces and motors connected to dental units.
ISO 3964:2016 specifies the nominal dimensions, tolerances and the extraction force of coupling systems for use between handpiece and motor which supply the handpiece with water, air and light and rotation energy.

    • sale 10% off
    • Standard
      18 pages
      English language
    • e-Library read for
      1 day

ISO 17509:2016 specifies requirements for torque transmitters to be used in oral implantology in conjunction with a dental handpiece as an accessory in the placement of dental implants and the further manipulation of connecting parts in the craniofacial area.
ISO 17509:2016 applies to torque transmitters used for placement and for removal in the oral cavity of the patient which are connected to power-driven systems having torque control mechanism, but does not apply to the power-driven systems ...
view more

    • sale 10% off
    • Standard
      13 pages
      English language
    • e-Library read for
      1 day

This International Standard determines a degree of firing to be implemented by the user. It represents a test method for
adapting the firing program of a dental furnace by determining the degree of firing of fired test specimens for a dental
ceramic.
The test method is suitable for powdered dental ceramics according to ISO 6872, Type I.
The test method enables monitoring of the temperature control in the dental furnace by evaluating the firing degree of a
dental ceramic. The test method is also ...
view more

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies the nominal diameters of the working parts of dental rotary
instruments, for example burs, laboratory burs, grinding instruments, diamond instruments, mandrels
and the corresponding designation.
Excluded are the diameters of endodontic instruments and scaler tips.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

ISO 2157:2016 specifies the nominal diameters of the working parts of dental rotary instruments, for example burs, laboratory burs, grinding instruments, diamond instruments, mandrels and the corresponding designation.
Excluded are the diameters of endodontic instruments and scaler tips.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

ISO 7787-1:2016 specifies dimensional and other requirements for the nine most commonly used steel cutters which are predominantly used in the dental laboratory.
Other characteristics of laboratory cutters, for example, spiralled blades or cross-cut, are not covered by this part of ISO 7787.
NOTE These cutters are also used in podiatry.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

This International Standard specifies requirements and test methods for air-powered and electricalpowered
scaler handpieces and scaler tips, including piezo, ferrostrictive and magnetostrictive type
ultrasonic scalers, operated as stand-alone items or connected to dental units, for use on patients. It
also contains specifications on manufacturers’ instructions, marking and packaging.

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

ISO 18556:2016 specifies requirements and their test methods for metallic and non-metallic intraoral spatulas used to introduce and model filling materials into a tooth cavity, including single use disposable items.
NOTE This includes instruments used for placement and contouring of non-metallic direct restorative materials.
It also specifies requirements for their marking and labelling.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

ISO 18397:2016 specifies requirements and test methods for air-powered and electrical-powered scaler handpieces and scaler tips, including piezo, ferrostrictive and magnetostrictive type ultrasonic scalers, operated as stand-alone items or connected to dental units, for use on patients. It also contains specifications on manufacturers' instructions, marking and packaging.

    • sale 10% off
    • Standard
      26 pages
      English language
    • e-Library read for
      1 day

ISO 18397:2016 specifies requirements and test methods for air-powered and electrical-powered scaler handpieces and scaler tips, including piezo, ferrostrictive and magnetostrictive type ultrasonic scalers, operated as stand-alone items or connected to dental units, for use on patients. It also contains specifications on manufacturers' instructions, marking and packaging.

    • sale 15% off
    • Standard
      17 pages
      English language
    • sale 15% off
    • Standard
      18 pages
      French language

Specifies requirements and test methods for pluggers and spreaders, used to condense root-canal filling materials. Includes, additional to standard sizes, a secondary size system referred to as "taper size". These "taper size" sizes are identifiable by tapers which vary with instrument size.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

This Standard specifies design and dimensional requirements and test methods for osteotomes. Osteotomes are used in dentistry in the area of implantology for the manual preparation of the implant bed, e.g. bone compaction and sinus floor elevation. The expanding field of implantology requires standardized instruments.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

ISO 17937:2015 specifies requirements and their test methods for osteotomes used in dentistry for bone compaction, internal sinus floor elevation, and jaw bone cleaving. It also specifies the requirements for their marking and labelling.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

ISO 13397-5:2015 specifies the designs and dimensions for Jacquette scalers.

    • sale 10% off
    • Standard
      10 pages
      English language
    • e-Library read for
      1 day

ISO 3630-3:2015 specifies requirements and test methods for endodontic instruments used as pluggers and spreaders, used to compact endodontic filling materials not cited in ISO 3630‑1, ISO 3630‑2, ISO 3630‑4, or ISO 3630‑5.
ISO 3630-3:2015 specifies requirements for size, marking, product designation, safety considerations, and their labelling and packaging.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

ISO 7494-2:2015 specifies requirements and test methods concerning
a) the configuration of dental unit connections to the compressed air supply, water supply, suction supply, and wastewater drain plumbing,
b) the materials, design, and construction of the compressed air and water system within the dental unit,
c) the quality for incoming water and air, and
d) the performance of dental unit suction system.
ISO 7494-2:2015 also specifies requirements for instructions for use and technical des...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

ISO 9687:2015 specifies graphical symbols for dental equipment. It is intended that the symbols are to be used on the appropriate piece of dental equipment and in documents pertaining to dental equipment, for example in instructions for use, marking, labelling, and technical product documentation.

    • sale 10% off
    • Standard
      36 pages
      English language
    • e-Library read for
      1 day

This part of the Standard specifies requirements and test methods for clamp forceps intended for the application of dental dam clamps to teeth.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

ISO 16635-2:2014 specifies requirements and test methods for clamp forceps intended for the application of dental rubber dam clamps to teeth.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

ISO 11499:2014 gives specific performance requirements for single-use dental cartridges of 1,0 ml, 1,7 ml, 1,8 ml and 2,2 ml nominal capacity for use with local anaesthetics.
ISO 11499:2014 specifies tests for leakage, plunger movement, extractable volume and underfilling, and lists general overall dimensions to ensure that the cartridge will fit dental cartridge syringes. Labelling requirements are also specified.

    • sale 10% off
    • Standard
      17 pages
      English language
    • e-Library read for
      1 day

ISO 9173-3:2014 specifies the design for extraction forceps used in dentistry.

    • sale 10% off
    • Standard
      16 pages
      English language
    • e-Library read for
      1 day

ISO 16635-1:2013 specifies requirements and test methods for hole punches for dental rubber dams.

    • sale 10% off
    • Standard
      12 pages
      English language
    • e-Library read for
      1 day

This part of ISO 3630 specifies specific requirements and test methods for enlargers not cited in ISO 3630-1, 3630-3, 3630-4 or 3630-5. This part of ISO 3630 specifies requirements for size, marking, product designation, safety considerations, labelling and packaging, including the instructions for use.

    • sale 10% off
    • Standard
      23 pages
      English language
    • e-Library read for
      1 day