11.060 - Dentistry

The purpose of this standard is to develop uniform nomenclature for the description of forensic dental data
and define a standardized set of uniform terms to convey this information. The goal of the standard is not to
define the extent of information collected, only to be certain that common terms are used in order to aid in an
identifying human remains or a living amnesiac.

This document classifies polymer-based crown and veneering materials used in dentistry and specifies
their requirements. It also specifies the test methods to be used to determine conformity to these
requirements.
This document is applicable to polymer-based crown and veneering materials for laboratory-fabricated
permanent veneers or crowns. It also applies to polymer-based dental crown and veneering materials
for which the manufacturer claims adhesion to the substructure without macro-mech...view more

This document defines terms used in dental product standards.
This document aims to facilitate the standard development process and the comprehension of
standards, and to improve communication with the FDI World Dental Federation, the World Health
Organization and other organizations interested in standardization.

This document specifies requirements and test methods for total digestible fluoride content and a
minimum soluble fluoride release potential in dental varnishes containing fluoride, intended for use
in the oral cavity directly on the outer surfaces of teeth and fillings. It also specifies packaging and
labelling requirements, including the instructions for use. This document covers fluoride varnishes to
be applied by dental health care workers.

This document specifies general requirements and test methods for accuracy of electronic apex locator that use more than two different frequencies to determine root canal length during root canal treatment.

This document defines the terms used to describe the distinctive characteristics of an individual's mouth by dentists and forensic dental experts. These terms are organized by concepts based on a forensic approach to the characteristics of a mouth, with many concepts specific to the identification domain that are not defined elsewhere in ISO dentistry vocabularies (e.g. "present tooth"). The hierarchical structure of this document is designed to describe attributes of a tooth, the mouth and a pr...view more

This document classifies polymer-based crown and veneering materials used in dentistry and specifies their requirements. It also specifies the test methods to be used to determine conformity to these requirements. This document is applicable to polymer-based crown and veneering materials for laboratory-fabricated permanent veneers or crowns. It also applies to polymer-based dental crown and veneering materials for which the manufacturer claims adhesion to the substructure without macro-mechanica...view more

This document defines terms used in dental product standards. This document aims to facilitate the standard development process and the comprehension of standards, and to improve communication with the FDI World Dental Federation, the World Health Organization and other organizations interested in standardization.

This International Standard describes requirements for tooth-like colour representations made of
ceramic materials used to determine the tooth colour in the patient’s mouth or to check the colour of
dental prosthesis, which are referred to as shade guides (colour rings) in this standard.
The coordinates of tooth colours in the colour space (colour coordinates) the specification of which is left
to the manufacturers’ discretion as well as the colour deviations of ceramic and other masses or m...view more

This document specifies test methods and procedures to determine the corrosion behaviour of metallic
materials used in the oral cavity. It is intended that these test methods and procedures be referred to in
individual International Standards specifying such metallic materials.
This document is not applicable to dental instruments.

This document provides a nomenclature of oral anomalies and a code for their representation to facilitate data entry and support interoperability at the semantic level.
This nomenclature covers the various anomalies that can be found in the oral cavity. When needed, information on the localization of the anomaly can be added through the use of other codes such as ISO 3950.

This document specifies requirements and test methods for hand-held and mechanically operated
instruments used for shaping and cleaning root canals, and which are not specified in other parts of the
ISO 3630 series.
This document specifies requirements for size, marking, product designation, safety considerations,
labelling and packaging.

This document provides a nomenclature of oral developmental disturbances of teeth and a code for their representation to facilitate data entry and support interoperability at the semantic level.
This nomenclature covers the various developmental disturbances of teeth.

This document specifies general requirements and test methods for portable dental equipment for use in non-permanent healthcare environments. Portable dental equipment within the scope of this document includes portable dental units, portable patient chairs, portable operator's stools, portable operating lights, portable suction source equipment, portable air compressors and other portable dental equipment in instances where these devices are designed and constructed to be transported for use in...view more

This document specifies requirements and test methods for assessing the applicability of dental
magnetic attachments that provide retention, support and stabilization of removable prostheses
(crowns and bridges, partial dentures and overdentures), superstructures of dental implants and
orthodontic or maxillofacial prostheses including obturators.

This document specifies test methods and procedures to determine the corrosion behaviour of metallic materials used in the oral cavity. It is intended that these test methods and procedures be referred to in individual International Standards specifying such metallic materials. This document is not applicable to dental instruments.

This document specifies requirements and test methods for hand-held and mechanically operated instruments used for shaping and cleaning root canals, and which are not specified in other parts of the ISO 3630 series. This document specifies requirements for size, marking, product designation, safety considerations, labelling and packaging.

This International Standard gives the requirement for the permissible reduction in strength resulting
from crevice corrosion of dental amalgam products that are within the scope of ISO 24234: Dentistry –
Dental amalgam and ISO 20749: Dentistry – Pre-capsulated dental amalgam. It provides details of the
test procedure for determining this.