11.060.10 - Dental materials

This document classifies polymer-based crown and veneering materials used in dentistry and specifies
their requirements. It also specifies the test methods to be used to determine conformity to these
requirements.
This document is applicable to polymer-based crown and veneering materials for laboratory-fabricated
permanent veneers or crowns. It also applies to polymer-based dental crown and veneering materials
for which the manufacturer claims adhesion to the substructure without macro-mech...view more

This document classifies polymer-based crown and veneering materials used in dentistry and specifies their requirements. It also specifies the test methods to be used to determine conformity to these requirements. This document is applicable to polymer-based crown and veneering materials for laboratory-fabricated permanent veneers or crowns. It also applies to polymer-based dental crown and veneering materials for which the manufacturer claims adhesion to the substructure without macro-mechanica...view more

This International Standard describes requirements for tooth-like colour representations made of
ceramic materials used to determine the tooth colour in the patient’s mouth or to check the colour of
dental prosthesis, which are referred to as shade guides (colour rings) in this standard.
The coordinates of tooth colours in the colour space (colour coordinates) the specification of which is left
to the manufacturers’ discretion as well as the colour deviations of ceramic and other masses or m...view more

This document specifies test methods and procedures to determine the corrosion behaviour of metallic
materials used in the oral cavity. It is intended that these test methods and procedures be referred to in
individual International Standards specifying such metallic materials.
This document is not applicable to dental instruments.

This document specifies requirements and test methods for assessing the applicability of dental
magnetic attachments that provide retention, support and stabilization of removable prostheses
(crowns and bridges, partial dentures and overdentures), superstructures of dental implants and
orthodontic or maxillofacial prostheses including obturators.

This document specifies test methods and procedures to determine the corrosion behaviour of metallic materials used in the oral cavity. It is intended that these test methods and procedures be referred to in individual International Standards specifying such metallic materials. This document is not applicable to dental instruments.

This International Standard gives the requirement for the permissible reduction in strength resulting
from crevice corrosion of dental amalgam products that are within the scope of ISO 24234: Dentistry –
Dental amalgam and ISO 20749: Dentistry – Pre-capsulated dental amalgam. It provides details of the
test procedure for determining this.

This document specifies requirements and test methods for assessing the applicability of dental magnetic attachments that provide retention, support and stabilization of removable prostheses (crowns and bridges, partial dentures and overdentures), superstructures of dental implants and orthodontic or maxillofacial prostheses including obturators.

This document specifies the requirements for the permissible reduction in strength resulting from crevice corrosion of dental amalgam products that are within the scope of ISO 24234 or ISO 20749. It provides details of the test procedure for determining this.

This document specifies requirements for tooth-like colour representations made of ceramic materials used to determine the tooth colour in the patient's mouth or to check the colour of dental prosthesis, which are referred to as colour tabs in this document. The colour coordinates of colour tabs are left to the manufacturers' discretion. Resources for visualizing the colours of ceramic and other masses, e.g. mass shade guides and colour patterns for certain ceramic and other masses, do not fall ...view more

This document gives the details of test procedures for evaluating the corrosion resistance of dental amalgam formed from products that are within the scopes of ISO 24234 and ISO 20749. This document is not applicable to other metallic materials in which an alloy powder reacts with a liquid alloy to produce a solid metallic material intended for dental restoration.

This standard specifies requirements and test methods to assess the thermomechanical compatibility between a veneering ceramic and a metallic or ceramic substructure material used for dental restorations. This document applies only to the materials used in combination. Conformity cannot be claimed for a single material. For requirements for ceramic materials, see ISO 6872. For requirements for metallic materials see ISO 22674.

This document specifies requirements and test methods to assess the thermomechanical compatibility between a veneering ceramic and a metallic or ceramic substructure material used for dental restorations.
This document applies only to the materials used in combination. Conformity cannot be claimed for a single material.
For requirements for ceramic materials, see ISO 6872. For requirements for metallic materials see ISO 22674.

This document specifies requirements and test methods to assess the thermomechanical compatibility between a veneering ceramic and a metallic or ceramic substructure material used for dental restorations. This document applies only to the materials used in combination. Conformity cannot be claimed for a single material. For requirements for ceramic materials, see ISO 6872. For requirements for metallic materials see ISO 22674.

This document specifies requirements for dental polymer-based restorative materials supplied in a form
suitable for mechanical mixing, hand-mixing, or intra-oral and extra-oral external energy activation,
and intended for use primarily for the direct or indirect restoration of the teeth and for luting.
The polymer-based luting materials covered by this document are intended for use in the cementation
or fixation of restorations and appliances such as inlays, onlays, veneers, crowns and bridg...view more

This document specifies requirements and test methods to compare the functional dimensions of orthodontic brackets and tubes and their chemical ion release, as well as packaging and labelling information.
This document is applicable to brackets and tubes for use in fixed orthodontic appliances.
This document does not specify specific qualitative and quantitative requirements for freedom from biological hazards; which are covered in ISO 10993‑1 and ISO 7405.

This document specifies requirements for dental polymer-based restorative materials supplied in a form suitable for mechanical mixing, hand-mixing, or intra-oral and extra-oral external energy activation, and intended for use primarily for the direct or indirect restoration of the teeth and for luting.
The polymer-based luting materials covered by this document are intended for use in the cementation or fixation of restorations and appliances such as inlays, onlays, veneers, crowns and bridges....view more

This document specifies requirements for dental polymer-based restorative materials supplied in a form suitable for mechanical mixing, hand-mixing, or intra-oral and extra-oral external energy activation, and intended for use primarily for the direct or indirect restoration of the teeth and for luting. The polymer-based luting materials covered by this document are intended for use in the cementation or fixation of restorations and appliances such as inlays, onlays, veneers, crowns and bridges. ...view more