ISO/TC 31/SC 7 - Industrial tyres and rims

This document specifies the main requirements of the metric series of pneumatic tyres primarily intended for industrial vehicles, including designations, dimensions and markings. The tyres are based on the following parameters: - speeds not exceeding 50 km/h; - use on 5° tapered or flat base rims. The conversion of code-designated industrial tyres into metric-designated tyres is outside the scope of this document.

This document specifies the main requirements, including size designation and marking, of 5-degree tapered and flat base rims primarily intended for industrial vehicles for use on prepared surfaces.

This document specifies the load ratings of the metric series of pneumatic tyres primarily intended for industrial vehicles for use on prepared surfaces. ISO 3739-1 deals with designation, dimensions and marking; ISO 3739-3 deals with rim contours for these tyres.

This document specifies the main requirements, including designations, dimensions and markings, of the metric series of rubber solid tyres for pneumatic tyre rims primarily intended for industrial machines for use on prepared surfaces. Rim contours fitting these tyres are specified in ISO 3739-1 and ISO 3739-3.

Specifies the main requirements of the metric series of tyres. Gives the tyre designations to be used. Tabulates the ratings needed.

ISO 3739-3:2008 specifies the main requirements, including size designation and marking, of 5° tapered and flat base rims, with diameters not exceeding rim diameter code 15 for pneumatic tyres and for solid tyres for pneumatic tyre rims, primarily intended for industrial vehicles for use on prepared surfaces. ISO 3739-1 gives the designation, dimensions and marking, and ISO 3739-2 gives the load ratings, of pneumatic tyres (metric series). ISO 10499-1 covers the designation, dimensions and marking of rubber solid tyres (metric series) for pneumatic tyre rims. Rim dimensions are specified for size and contour only. The tyre and wheel/rim manufacturers are consulted for confirmation of the suitability of the tyre/rim combinations, particularly with regard to rim profile and wheel strength.

ISO 3739-1:2007 specifies the main requirements of the metric series of pneumatic tyres primarily intended for industrial vehicles, including designations, dimensions and markings. The tyres are based on the following parameters: speeds not exceeding 50 km/h; use on 5° tapered or flat base rims. The conversion of code-designated industrial tyres into metric-designated tyres is outside the scope of ISO 3739-1:2007.

Gives the main requirements, including size designation and marking of flat base rims for pneumatic tyres and for solid tyres for pneumatic tyre rims.

Applies to tyres primarily intended for industrial vehicles for use on prepared surfaces. The tyres are based on the following parameters: speeds not exceeding 50 km/h, rim diameters not exceeding rim diameter code of 15.

Applies to tyres primarily intended for industrial vehicles for use on prepared surfaces (counterbalanced lift trucks, side loaders, and other vehicles). Defines a reference load-carrying capacity which the load rating is based on.