SIST EN 2713-009:2009
(Main)Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard
This standard specifies the characteristics of YAG X3 laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 200 °C.
It shall also be possible to mark these cables by hot stamp printing or ink jet printing.
These markings shall be in accordance with EN 3838.
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Teil 009: Geschirmt (Umseilung) und ummantelt, YAG X3Laserbedruckbar - Produktnorm
Diese Norm legt die Eigenschaften von YAG X3 Laser bedruckbaren, ein und mehradrigen, geschirmten (Umseilung) und ummantelten elektrischen Leitungen fest, die zur Verwendung in Bordnetzen von Luftfahr¬zeugen bei Betriebstemperaturen zwischen –55 °C und 200 °C bestimmt sind.
Es muss auch möglich sein, diese Leitungen mittels Heißprägung oder Tintenstrahldruck zu kennzeichnen.
Diese Kennzeichnungen müssen EN 3838 entsprechen
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 009 : Blindés (guipés) et gainés, marquables au laser YAG X3 - Norme de produit
Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne temperature med –55 °C in 200 °C - 009. del: Oklopljeni (spirala) in oplaščeni, z možnostjo laserskega tiskanja YAG X3 - Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 13-Apr-2009
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 06-Apr-2009
- Due Date
- 11-Jun-2009
- Completion Date
- 14-Apr-2009
Overview
EN 2713-009:2006 is a CEN/AECMA aerospace product standard for single- and multicore screened (spiral) and jacketed electrical cables intended for on‑board aircraft electrical systems. It covers cables rated for operating temperatures between −55 °C and 200 °C and specifies materials, construction, marking options (including YAG X3 laser printable, hot‑stamp and ink‑jet), required performance and test methods. Marking requirements reference EN 3838.
Key topics and technical requirements
- Scope & use: Cables for general-purpose aerospace wiring systems, single to 4 cores (no filler cores).
- Core materials & construction:
- Core insulation per EN 2266-003 (fluorocarbon top coat).
- Cores (1–4) - 2–4 core cables twisted per EN 2235.
- Screen & jacket:
- Nickel‑plated copper stranded spiral screen (strand dimensions given in the standard’s tables).
- Outer jacket: polyimide layer (nom. 30 µm) coated on both sides with 2.5 µm fluorocarbon; top coat of dispersion fluorocarbon min. 15 µm to accept YAG X3 laser marking.
- Winding/overlap requirements: single or two‑layer wrapping options with specified minimum overlaps.
- Marking: YAG X3 laser printable; also hot‑stamp or ink‑jet marking allowed. Markings must comply with EN 3838.
- Performance & tests: References EN 3475‑100 test series and EN 2235. Applicable tests include visual, mass, dimensional, ohmic resistance, voltage proof, insulation resistance, flammability (extinguishing time ≤ 3 s), accelerated ageing (250 ± 5 °C), thermal endurance (40 000 h at 200 °C), shrinkage limits, notch propagation (40 µm), scrape abrasion, tensile/plating tests, smoke density and toxicity assessments.
- Quality & designation: Quality assurance per EN 9133; product designation and identification formats defined.
Applications and users
- Typical applications: in‑aircraft harnesses, avionics wiring, power and signal distribution in commercial, military and rotorcraft platforms where high temperature resistance and reliable screening are required.
- Primary users:
- Aerospace cable manufacturers and suppliers
- Aircraft harness and loom designers
- Procurement and specification engineers
- Quality, test and certification teams in aerospace OEMs and MRO organizations
Related standards
- EN 2235 - Single and multicore screened and jacketed technical specification
- EN 2266-003 - Ink jet printable cores
- EN 2713-002 - General requirements for screened and jacketed cables
- EN 3475-100 - Test methods (general)
- EN 3838 - User-applied marking requirements
- EN 2083 - Conductors for electrical cables
- EN 9133 - Quality management / qualification procedure
Keywords: EN 2713-009:2006, aerospace cables, YAG X3 laser printable, screened spiral cable, jacketed polyimide, aircraft electrical systems, high‑temperature cable.
Frequently Asked Questions
SIST EN 2713-009:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser printable - Product standard". This standard covers: This standard specifies the characteristics of YAG X3 laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.
This standard specifies the characteristics of YAG X3 laser printable, single and multicore screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between - 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing or ink jet printing. These markings shall be in accordance with EN 3838.
SIST EN 2713-009:2009 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2713-009:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2009
$HURQDYWLND(QRDOLYHþåLOQLHOHNWULþQLNDEOL]DVSORãQRXSRUDER'HORYQH
WHPSHUDWXUHPHG±ƒ&LQƒ& GHO 2NORSOMHQL VSLUDOD LQRSODãþHQL]
PRåQRVWMRODVHUVNHJDWLVNDQMD<$*;6WDQGDUG]DSURL]YRG
Aerospace series - Cables, electrical, single and multicore for general purpose -
Operating temperatures between - 55 °C and 200 °C - Part 009: Screened (spiral) and
jacketed, YAG X3 laser printable - Product standard
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine
Verwendung - Teil 009: Geschirmt (Umseilung) und ummantelt, YAG X3Laser
bedruckbar - Produktnorm
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général -
Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 009 :
Blindés (guipés) et gainés, marquables au laser YAG X3 - Norme de produit
Ta slovenski standard je istoveten z: EN 2713-009:2006
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 2713-009
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2006
ICS 49.060
English Version
Aerospace series - Cables, electrical, single and multicore for
general purpose - Operating temperatures between - 55 °C and
200 °C - Part 009: Screened (spiral) and jacketed, YAG X3 laser
printable - Product standard
Série aérospatiale - Câbles, électriques, mono et Luft- und Raumfahrt - Leitungen, elektrisch, ein- und
multiconducteurs d'usage général - Températures de
mehradrig, für allgemeine Verwendung -
fonctionnement comprises entre - 55 °C et 200 °C - Partie Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil
009 : Blindés (guipés) et gainés, marquables au laser YAG 009: Geschirmt (Umseilung) und ummantelt, YAG X3 Laser
X3 - Norme de produit bedruckbar - Produktnorm
This European Standard was approved by CEN on 27 April 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2713-009:2006: E
worldwide for CEN national Members.
Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Materials and construction.4
5 Required characteristics.7
6 Quality assurance.8
7 Designation .8
8 Identification and marking .9
9 Packaging, labelling and delivery lengths .9
10 Technical specification .9
Foreword
This European Standard (EN 2713-009:2006) has been prepared by the European Association of Aerospace
Manufacturers - Standardization (AECMA-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2007, and conflicting national standards shall be withdrawn at
the latest by January 2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
1 Scope
This standard specifies the characteristics of YAG X3 laser printable, single and multicore screened (spiral)
and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures
between − 55 °C and 200 °C.
It shall also be possible to mark these cables by hot stamp printing or ink jet printing.
These markings shall be in accordance with EN 3838.
2 Norm
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...