SIST EN 2266-003:2006
(Main)Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Ink jet printable - Product standard
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Ink jet printable - Product standard
This standard specifies the characteristics of ink jet printable electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between - 55 °C and 200 °C.
It shall also be possible to mark these cables by hot stamp printing. These markings shall be in accordance with EN 3838.
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 003: Tintenstrahl-bedruckbar - Produktnorm
Diese Norm legt die Eigenschaften von tintenstrahl-bedruckbaren elektrischen Leitungen fest, die zur Verwendung in Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen - 55 °C und 200 °C bestimmt sind.
Es muss auch möglich sein, diese Leistungen mittels Heißprägung zu kennzeichnen. Diese Kennzeichnungen müssen EN 3838 entsprechen.
Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 003 : Marquables au jet d'encre - Norme de produit
Aeronavtika – Električni kabli za splošno uporabo – Delovne temperature med –55 °C in 200 °C – 003. del: Z možnostjo brizganega tiskanja – Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 31-Aug-2006
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Sep-2006
- Due Date
- 01-Sep-2006
- Completion Date
- 01-Sep-2006
Overview
EN 2266-003:2005 is a CEN (Aerospace series) product standard that defines the characteristics of ink jet printable electrical cables for use in aircraft on‑board electrical systems. It applies to cables designed for continuous operating temperatures between −55 °C and 200 °C and requires that the same cables also be markable by hot‑stamp printing in accordance with EN 3838. This standard supports consistent material, construction and test requirements for high‑temperature aerospace cabling.
Key topics and technical requirements
- Temperature range: Rated for operation between −55 °C and 200 °C.
- Materials and construction:
- Conductors per EN 2083 (copper or copper alloy).
- Insulation composed of two polyimide layers (nominal 30 µm each) each coated both sides with 2.5 µm fluorocarbon; layers wound with ≥51% overlap and opposite winding directions.
- Top coat: dispersion fluorocarbon, ≥10 µm wall thickness, formulated to accept user‑applied ink‑jet marking; required for core use in multicore cables.
- Marking: Accepts both ink jet printable and hot stamp marking methods; hot‑stamp marking must comply with EN 3838.
- Performance and tests: Reference to EN 3475‑100 test methods. Key tests include:
- Ohmic resistance, dimensions, mass and voltage proof
- Insulation/surface resistance and overload resistance
- Accelerated ageing and thermal endurance: 40 000 h at 200 °C
- Thermal shock, shrinkage, delamination, bending, cold bend
- Flammability (extinguishing time ≤ 3 s), smoke density, toxicity
- Mechanical tests: dynamic cut‑through, torsion, tensile, scrape abrasion, strippability, and marking permanence
Applications
- Wiring harness cores and single‑core cables in commercial and military aircraft where high temperature performance and durable, legible marking are required.
- Use in avionics, environmental control, engine bay, and other on‑board systems exposed to elevated temperatures or requiring long thermal endurance.
- Suitable as cores for multicore cable assemblies when top coat specification is met.
Who uses this standard
- Aerospace OEMs and subcontractors (harness and cable manufacturers)
- Electrical and harness design engineers
- Procurement and quality assurance teams responsible for material acceptance and certification
- Maintenance and repair organizations specifying replacement cables
Related standards
- EN 2266‑002 (General requirements for same cable family)
- EN 2083 / EN 2084 (Conductors and single‑core cable technical specs)
- EN 3475‑100 (Aerospace cable test methods)
- EN 3838 (User‑applied markings on aircraft cables)
- EN 9133 (Quality assurance / qualification procedure)
Keywords: EN 2266-003:2005, ink jet printable, aerospace cables, aircraft electrical cables, polyimide insulation, fluorocarbon top coat, high‑temperature cable standard.
Frequently Asked Questions
SIST EN 2266-003:2006 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Ink jet printable - Product standard". This standard covers: This standard specifies the characteristics of ink jet printable electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between - 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing. These markings shall be in accordance with EN 3838.
This standard specifies the characteristics of ink jet printable electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between - 55 °C and 200 °C. It shall also be possible to mark these cables by hot stamp printing. These markings shall be in accordance with EN 3838.
SIST EN 2266-003:2006 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 2266-003:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Ink jet printable - Product standardSérie aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 003 : Marquables au jet d'encre - Norme de produitLuft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 003: Tintenstrahl-bedruckbar - ProduktnormTa slovenski standard je istoveten z:EN 2266-003:2005SIST EN 2266-003:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 2266-003:200601-september-2006
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2266-003
December 2005 ICS 49.060 English Version
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Ink jet printable - Product standard
Série aérospatiale - Câbles, électriques, d'usage général - Températures de fonctionnement comprises entre - 55 °C et 200 °C - Partie 003 : Marquables au jet d'encre - Norme de produit
Luft- und Raumfahrt - Leitungen, elektrisch, für allgemeine Verwendung - Betriebstemperaturen zwischen - 55 °C und 200 °C - Teil 003: Tintenstrahl bedruckbar - Produktnorm This European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2266-003:2005: E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...