SIST EN IEC 62668-1:2020/A1:2024

SLOVENSKI STANDARD
01-december-2024
Upravljanje procesov v avioniki - Preprečevanje ponarejanja - 1. del: Izogibanje
uporabi ponarejenih, lažnih in recikliranih elektronskih komponent - Dopolnilo A1
(IEC 62668-1:2019/AMD1:2024)
Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of
counterfeit, fraudulent and recycled electronic components (IEC 62668-
1:2019/AMD1:2024)
Luftfahrtelektronik-Prozessmanagement - Verhinderung von Produktfälschung - Teil 1:
Vermeidung des Gebrauchs von gefälschten, betrügerischen und wiederverwerteten
elektronischen Bauelementen (IEC 62668-1:2019/AMD1:2024)
Gestion des processus pour l'avionique - Prévention de la contrefaçon - Partie 1:
Prévention de l'utilisation de composants électroniques contrefaits, frauduleux et
recyclés (IEC 62668-1:2019/AMD1:2024)
Ta slovenski standard je istoveten z: EN IEC 62668-1:2019/A1:2024
ICS:
03.100.50 Proizvodnja. Vodenje Production. Production
proizvodnje management
31.020 Elektronske komponente na Electronic components in
splošno general
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62668-1:2019/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM October 2024
ICS 03.100.50; 31.020; 49.060
English Version
Process management for avionics - Counterfeit prevention - Part
1: Avoiding the use of counterfeit, fraudulent and recycled
electronic components
(IEC 62668-1:2019/AMD1:2024)
Gestion des processus pour l'avionique - Prévention de la Luftfahrtelektronik-Prozessmanagement - Verhinderung von
contrefaçon - Partie 1: Prévention de l'utilisation de Produktfälschung - Teil 1: Vermeidung des Gebrauchs von
composants électroniques contrefaits, frauduleux et gefälschten, betrügerischen und wiederverwerteten
recyclés elektronischen Bauelementen
(IEC 62668-1:2019/AMD1:2024) (IEC 62668-1:2019/AMD1:2024)
This amendment A1 modifies the European Standard EN IEC 62668-1:2019; it was approved by CENELEC on 2024-10-16. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62668-1:2019/A1:2024 E

European foreword
The text of document 107/416/FDIS, future edition 1 of IEC 62668-1/AMD1, prepared by TC 107
"Process management for avionics" was submitted to the IEC-CENELEC parallel vote and approved
by CENELEC as EN IEC 62668-1:2019/A1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-10-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-10-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62668-1:2019/AMD1:2024 was approved by CENELEC as
a European Standard without any modification.

IEC 62668-1 ®
Edition 1.0 2024-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Process management for avionics – Counterfeit prevention –

Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic

components
Gestion des processus pour l'avionique – Prévention de la contrefaçon –

Partie 1: Prévention de l'utilisation de composants électroniques contrefaits,

frauduleux et recyclés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 03.100.50, 31.020, 49.060 ISBN 978-2-8322-9642-4

– 2 – IEC 62668-1:2019/AMD1:2024
© IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PROCESS MANAGEMENT FOR AVIONICS –
COUNTERFEIT PREVENTION –
Part 1: Avoiding the use of counterfeit, fraudulent and
recycled electronic components

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC [draws/draw] attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch . IEC
shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 62668-1:2019 has been prepared by IEC technical committee 107:
Process management for avionics.
The text of this Amendment is based on the following documents:
Draft Report on voting
107/416/FDIS 107/421/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
IEC 62668-1:2019/AMD1:2024 – 3 –
© IEC 2024
The language used for the development of this Amendment is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn, or
• revised.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.

___________
3.2 Abbreviated terms
Add the following to the list:
IECQ IEC quality assessment systems for electronic components
4.2 Minimum avionics OEM requirements
Replace, in list item c), "….
such as SAE AS5553A or SAE AS5553B or other similar (see 4.12.13) " with "….

such as SAE AS5553D or others similar (see 4.12.13) "

4.4.4 How to establish traceability
Add, at the end of second paragraph, the following:
(see Figure 2).
– 4 – IEC 62668-1:2019/AMD1:2024
© IEC 2024
Add, after Note 2, the following new figure:

Figure 2 – Typical IEC 62668-1 and SAE AS5553 traceability requirements approach
4.5.4.5 USA DFARS and related FARS for USA supply chains
Delete, in Note 1, the first sentence.
4.12.13.1 General
Replace the text with the following:
The OEM shall have an anti-counterfeit, fraudulent and recycling plan in accordance with this
document (see 4.2 and in particular 4.2 c)).
The OEMs which do not have an SAE AS5553 plan shall meet the requirements specified
in 4.2 c).
The OEMs that have an SAE AS5553 anti-counterfeit plan for electronic components may
consider it in their IEC 62668-1 anti-counterfeit plans; Table 3 identifies the IEC 62668-1
requirements which can be satisfied or not by SAE AS5553D requirements.
SAE AS5553, currently at revision D, is a very comprehensive document targeted at the general
and high reliability industry (see Clause A.16 for further information).
SAE AS5553D has traceability requirements which can be different from IEC 62668-1
requirements (see Figure 2), leading Table 3 to not be satisfactory without additional steps. In
addition to the management of electronic components coming into a business, IEC 62668-1
also includes the management of an OEM’s IP of all the products sold out of the business,
including the management of spares (either sold as separate individual components or
assemblies) and repairs.
IEC 62668-1:2019/AMD1:2024 – 5 –
© IEC 2024
Table 2 – IEC 62668-1 requirements satisfied or not if OEM has an approved
SAE AS5553A plan
Delete the existing Table 2
Table 3 – IEC 62668-1 requirements satisfied or not if OEM has an approved
SAE AS5553B plan
Replace the existing Table 3 with the following new table:
Table 3 – IEC 62668-1 requirements satisfied or not if OEM has an approved
SAE AS5553D plan
IEC 62668-1 Satisfied by SAE AS5553D Comments Notes for avionics OEMs
requirement requirement when writing an SAE
AS5553D plan as a basis for
See Note 1
an IEC 62668-1 plan
4.2 a) No.
4.2 b) No. SAE AS5553D has no minimum Refer to an IEC 62239-1 ECMP
specific component selection plan addressing obsolescence
rules reviewing the component management and component
IP, only rules for maximizing selection and qualification
the availability of parts with an rules for avionics OEMs.
obsolescence management
plan and rules for sourcing or
buying components.
4.2 c) An SAE AS5553D plan only IEC 62668-1 requires that the Issue a cross reference matrix
satisfies how individual organization has anti- based on Table 3 to show how
components are purchased and counterfeit procedures for all the SAE
...