SIST EN 13775-5:2004
(Main)Railway applications - Measuring of new and modified freight wagons - Part 5: Bogies with 3 wheelsets
Railway applications - Measuring of new and modified freight wagons - Part 5: Bogies with 3 wheelsets
This European Standard specifies principles and requirements for measuring bogies with 3 wheelsets. This ensures that the measuring processes are applied in accordance with uniform criteria. It applies to new and modified bogies with 3 wheelsets.
Provisions going beyond the scope of these requirements are generally agreed between the contracting parties involved.
The measuring processes relate to the bogies with or without add-ons in their entirety or just part of them if the geometrical structure does not permit anything else. Where appropriate, other measuring processes not specified here are necessary and are specified in each individual case.
Bahnanwendungen - Vermessung von Güterwagen beim Neubau und bei Umbauten - Teil 5: Drehgestelle mit 3 Radsätzen
Applications ferroviaires - Mesure des wagons lors de leur construction et lors de modifications - Partie 5: Bogies a trois essieux
La présente Norme européenne précise les exigences concernant les mesures sur les bogies à trois essieux, qui assurent que les opérations de mesure sont effectuées en fonction de critères unifiés. Elle est applicable aux bogies à trois essieux neufs ou modifiés.
Les prescriptions allant au-delà du domaine d'application et de ses exigences font l'objet d'un contrat particulier entre les parties concernées.
Les opérations de mesure se rapportent aux châssis dans leur totalité avec ou sans superstructure, ou à certaines parties de ceux-ci lorsque leur conception géométrique ne permet pas de faire autrement. Il y a lieu, le cas échéant, de procéder à des opérations de mesure supplémentaires, non prévues ici, qui sont déterminées au cas par cas.
Železniške aplikacije – Merjenje novih in predelanih tovornih vagonov – 5.del: Triosni podstavni vozički
General Information
- Status
- Published
- Publication Date
- 31-Aug-2004
- Technical Committee
- IŽNP - Reilway applications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Sep-2004
- Due Date
- 01-Sep-2004
- Completion Date
- 01-Sep-2004
Overview
EN 13775-5:2004 - Railway applications: Measuring of new and modified freight wagons - Part 5: Bogies with 3 wheelsets (CEN) specifies the principles and requirements for measuring three‑axle bogies used under freight wagons. The standard defines uniform criteria for measurement processes so that dimensional verification of new-build and modified bogies is consistent, repeatable and acceptable between contracting parties.
Key topics and requirements
- Scope and applicability: Applies to new and modified bogies with 3 wheelsets used on freight wagons. It covers measurements applied to the bogie as a whole or to individual parts when the geometry prevents measuring the entire assembly.
- Uniform measurement principles: Establishes baseline requirements and measurement principles to ensure consistent procedures across manufacturers, maintenance organizations and acceptance tests.
- Whole‑assembly vs partial measurement: Specifies that measurements may be performed on the complete bogie (with or without attached items) or on constituent parts where the bogie geometry does not permit full‑assembly checks.
- Add‑ons and attachments: Measurement processes relate to bogies with or without add‑ons; the standard allows flexibility to include attached components when relevant to geometry or functionality.
- Contracting‑party agreements: Any provisions that go beyond the scope of EN 13775-5:2004 should be agreed between the contracting parties. Where additional measurement methods are required, these are specified case‑by‑case by the parties involved.
- Practical measurement considerations: While this part sets principles and criteria, specific measurement tools, tolerances and supplementary procedures are determined in accordance with agreed test plans or other applicable standards.
Applications
- Factory acceptance testing of new three‑axle bogies for freight wagons
- Verification after modification or overhaul to confirm dimensional conformity
- Quality control during manufacture and assembly of bogies
- Interoperability checks where consistent geometric data are required between suppliers and operators
- Basis for contractual measurement procedures between manufacturers, operators and infrastructure managers
Who uses this standard
- Freight wagon manufacturers and OEMs
- Rolling‑stock design and engineering teams
- Maintenance depots and overhaul workshops
- Test laboratories and inspection bodies
- Railway operators and contracting authorities involved in wagon acceptance
Related standards
- EN 13775 series (other parts) and other CEN railway measurement and testing standards. Contracting parties often reference EN 13775-5:2004 together with complementary national or international measurement specifications.
Keywords: EN 13775-5:2004, bogies with 3 wheelsets, measuring, freight wagons, railway applications, measurement procedures, freight wagon bogies, rolling stock inspection.
Frequently Asked Questions
SIST EN 13775-5:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Railway applications - Measuring of new and modified freight wagons - Part 5: Bogies with 3 wheelsets". This standard covers: This European Standard specifies principles and requirements for measuring bogies with 3 wheelsets. This ensures that the measuring processes are applied in accordance with uniform criteria. It applies to new and modified bogies with 3 wheelsets. Provisions going beyond the scope of these requirements are generally agreed between the contracting parties involved. The measuring processes relate to the bogies with or without add-ons in their entirety or just part of them if the geometrical structure does not permit anything else. Where appropriate, other measuring processes not specified here are necessary and are specified in each individual case.
This European Standard specifies principles and requirements for measuring bogies with 3 wheelsets. This ensures that the measuring processes are applied in accordance with uniform criteria. It applies to new and modified bogies with 3 wheelsets. Provisions going beyond the scope of these requirements are generally agreed between the contracting parties involved. The measuring processes relate to the bogies with or without add-ons in their entirety or just part of them if the geometrical structure does not permit anything else. Where appropriate, other measuring processes not specified here are necessary and are specified in each individual case.
SIST EN 13775-5:2004 is classified under the following ICS (International Classification for Standards) categories: 45.060.20 - Trailing stock. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13775-5:2004 is associated with the following European legislation: EU Directives/Regulations: 93/38/EEC; Standardization Mandates: M/024. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 13775-5:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Vermessung von Güterwagen beim Neubau und bei Umbauten - Teil 5: Drehgestelle mit 3 RadsätzenApplications ferroviaires - Mesure des wagons lors de leur construction et lors de modifications - Partie 5: Bogies a trois essieuxRailway applications - Measuring of new and modified freight wagons - Part 5: Bogies with 3 wheelsets45.060.20Železniški vagoniTrailing stockICS:Ta slovenski standard je istoveten z:EN 13775-5:2004SIST EN 13775-5:2004en01-sept
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...