iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1918-4:1999

(Main)

Gas supply systems - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns

Gas supply systems - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns

This standard specifies procedures and practices which are safe and environmentally acceptable. It covers the functional recommendations for design, construction, testing, commissioning, operation  and maintenance of underground gas storage facilities in rock caverns up to and including the top flanges of the casings. It does not cover refrigerated gas storage. The necessary surface facilities for an underground gas storage are described in EN 1918-5.

Gasversorgungssysteme - Untertagespeicherung von Gas - Teil 4: Funktionale Empfehlungen für die Speicherung in Felskavernen

Diese Europäische Norm legt Verfahren und Praktiken fest, die sicher und akzeptabel für die Umwelt sind. Sie umfaßt die funktionalen Empfehlungen für Planung, Bau, Prüfung, Inbetriebnahme, Betrieb und Instandhaltung von Untertagespeichern für Gas in Felskavernen bis zum obersten Flansch des Futterrohres. Sie umfaßt die Speicherung von tiefkaltem Gas. Die erforderlichen übertägigen Anlagen für einen Untertagespeicher für Gas werden in prEN 1918-5 beschrieben.

Systeme d'alimentation en gaz - Stockage souterrain de gaz - Partie 4: Recommandations fonctionnelles pour le stockage en cavités minées

La présente norme spécifie les procédures et les pratiques qui sont acceptables pour la sécurité et l'environnement. Elle décrit les recommandations fonctionnelles pour la conception, la construction, les essais, la mise en service, l'exploitation et la maintenance des stockages souterrains en cavités minées jusqu'aux brides de tete des cuvelages incluses. Elle ne couvre pas le stockage de gaz réfrigéré. Les installations de surface qui sont nécessaires pour un stockage souterrain de gaz sont décrites dans la prEN 1918-5.

Sistemi oskrbe s plinom - Podzemna plinska skladišča - 4. del: Funkcionalna priporočila za skladiščenje v skalnih kavernah

General Information

Status
Withdrawn
Publication Date
31-Dec-1998
Withdrawal Date
09-Oct-2016
ICS
75.200 - Petroleum products and natural gas handling equipment
Technical Committee
DPL - Gas supply
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Oct-2016
Due Date
29-Oct-2016
Completion Date
10-Oct-2016
Directive
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/017 - Standardization mandate to CEN in the field of equipment and installation for the transmission and distribution of gas
Ref Project
EN 1918-4:1998 - Gas supply systems - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns

Relations

Replaced By
SIST EN 1918-4:2016 - Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns
Effective Date
01-Nov-2016

Buy Standard

EN 1918-4:1999EN 1918-4:1999
PreviousNext
Standard
EN 1918-4:1999
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.QNFLRQDOQDGasversorgungssysteme - Untertagespeicherung von Gas - Teil 4: Funktionale Empfehlungen für die Speicherung in FelskavernenSysteme d'alimentation en gaz - Stockage souterrain de gaz - Partie 4: Recommandations fonctionnelles pour le stockage en cavités minéesGas supply systems - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns75.200Petroleum products and natural gas handling equipme
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1474-2:2020/AC:2023(Corrigendum)
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
EN 1474-2:2020/AC:2023

This European Standard gives general guidelines for the design, material selection, qualification, certification, and testing details for Liquefied Natural Gas (LNG) transfer hoses for offshore transfer or on coastal weather-exposed facilities for aerial, floating and submerged configurations or a combination of these. Whilst this European Standard is applicable to all LNG hoses, it is acknowledged that there may be further specific requirements for floating and submerged hoses.
The transfer hoses will be designed to be part of transfer systems (it means that they will be fitted with ERS, QCDC, handling systems, hydraulic and electric components etc.) To avoid unnecessary repetition, cross-references to EN 1474-1 and EN 1474-3, are made for all compatible items, and for references, definitions and abbreviations. Where additional references, definitions and abbreviations are required specifically for LNG hoses, they are listed in this European Standard.
Transfer hoses need to be durable when operating in the marine environment and to be flexible with a minimum bending radius compatible with handling and the operating requirements of the transfer system.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17649:2022(Main)
Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Managementsystem (PIMS) - Functional requirements
EN 17649:2022

This document specifies requirements on the development and implementation of a safety management system for operators of gas transmission and/or distribution infrastructure.
This document refers to all activities and processes related to safety aspects and performed by operators of a gas network, including those activities entrusted to contractors. It includes safety-related provisions on operation of the gas network.
The described safety management system is applicable to infrastructure for the transmission and distribution of processed, non-toxic and non-corrosive gas of the 2nd gas family as classified in EN 437 , including injected gases.
NOTE 1 Injected gases can be bio methane, hydrogen, synthetic gases and others.
This document can also apply for gas infrastructure conveying only other gases such as bio methane, hydrogen, syntactic gases or gases of the 3rd family as classified in EN 437.
Specific requirements for either transmission or distribution can be found in de specific parts for transmission and distribution.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12583:2022(Main)
Gas Infrastructure - Compressor stations - Functional requirements
EN 12583:2022

This European Standard describes the specific functional requirements for the design, construction, operation, maintenance and disposal activities for safe and secure gas compressor stations.
This European Standard applies to new gas compressor stations with a Maximum Operating Pressure (MOP) over 16 bar and with a total shaft power over 1 MW. For existing compressor stations, this European Standard applies  to  new  compressor  units.  Where  changes/modifications  to  existing  installations  or  gas  composition take place, due account may be taken of the requirements of this European Standard.
This European Standard does not apply to gas compressor stations operating prior to the publication of this European Standard.
The purpose of this European Standard is intended to:
—  ensure the health and safety of the public and all site personnel,
—  to cover environmental issues and
—  to avoid incidental damage to nearby property and
—  to open the gas infrastructure to accommodate renewable gases.
This European Standard does not apply to:
—  off-shore gas compressor stations;
—  gas compressor stations for compressed natural gas filling-stations;
—  customer installations downstream of the point of custody transfer;
—  design and construction of driver packages (see Annex C);
—  mobile compressor equipment.
For supplies to utility services such as small central heating boilers reference should be made to EN 1775.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20257-2:2021(Main)
Installation and equipment for liquefied natural gas - Design of floating LNG installations - Part 2: Specific FSRU issues (ISO 20257-2:2021)
EN ISO 20257-2:2021

The objective of ISO 20257 is to provide functional guidelines and recommend practices for the design of
floating liquefied natural gas (LNG) installations in order to have a safe and environmentally acceptable design and operation of floating LNG installations. ISO 20257 gives functional guidelines for the design and operation of all floating LNG installations including those for the liquefaction, storage, vaporisation, transfer and handling of LNG.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17278:2021(Main)
Natural gas vehicles - Vehicle fuelling appliances
EN 17278:2021

This document covers the design and manufacturing, installation and testing, operation and maintenance for vehicle fuelling appliances (VFAs) – the assemblies of the pressure equipment with limited technical parameters, intended for the non-commercial fuelling of natural gas vehicles (NGVs) with compressed natural gas (CNG).
This document is applicable to VFAs supplied with natural gas as defined in local applicable gas composition regulations or EN 16723-2, or with other gases meeting these requirements including biomethane, upgraded coal-bed methane (CBM) and gas from liquefied natural gas (LNG) vaporizer (on-site or off-site).
In case of combination of the certified VFA assembly with additional equipment, such as external storage and/or dispenser, EN ISO 16923 applies to the new assembly - the certified VFA assembly with added external equipment.
In case of combinations of interconnected VFA assemblies, EN ISO 16923 applies to the whole new assembly of the certified VFA assemblies.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1473:2021(Main)
Installation and equipment for liquefied natural gas - Design of onshore installations
EN 1473:2021

This document gives guidelines for the design, construction and operation of all onshore liquefied natural gas (LNG) installations for the liquefaction, storage, vaporization, transfer and handling of LNG and natural gas (NG).
This document is applicable for plants with an LNG storage capacity above 200 t.
The designated boundary limits are LNG inlet/outlet by the ship’s manifold including vapour return connection, the truck loading/unloading connection including vapour return, the rail car loading/unloading connection including vapour return and the natural gas in and outlet boundary by piping systems.
Terminals or plant types have one or more boundary limits as described in this scope (see Figure 1).
A short description of each of these installations is given in Annex G.
Feed gas for LNG liquefaction installations (plant) can be from gas field, associated gas from oil field, piped gas from transportation grid or from renewables.
Floating solutions (for example FPSO, FSRU, SRV), whether off-shore or near-shore, are not covered by this document even if some concepts, principles or recommendations could be applied. However, in case of berthed FSRU with LNG transfer across the jetty, the following recommendations apply for the jetty and topside facilities.
In case of solutions using floating storage unit (FSU) and land-based re-gasification solution, the on-shore part is covered by these standard recommendations.
Plants with a storage inventory from 5 t up to 200 t are covered by [5].

  • Standard
    139 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    126 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    137 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13423:2021(Main)
Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
EN 13423:2021

This document provides requirements for the operation (“user manual”) of vehicles using CNG (fossil and renewable) as fuel, giving recommendations of good, safe and environmental friendly practices for users, including transit through specific areas (tunnels, ferries, etc.), refuelling, parking, and workshops, and also giving instructions in case of accident. This document also provides requirements concerning competence, knowledge and ability of workshops' operatives as well as any other matter concerned with safety.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1474-2:2020(Main)
Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses
EN 1474-2:2020

This European Standard gives general guidelines for the design, material selection, qualification, certification, and testing details for Liquefied Natural Gas (LNG) transfer hoses for offshore transfer or on coastal weather-exposed facilities for aerial, floating and submerged configurations or a combination of these. Whilst this European Standard is applicable to all LNG hoses, it is acknowledged that there may be further specific requirements for floating and submerged hoses.
The transfer hoses will be designed to be part of transfer systems (it means that they will be fitted with ERS, QCDC, handling systems, hydraulic and electric components etc.) To avoid unnecessary repetition, cross-references to EN 1474-1 and EN 1474-3, are made for all compatible items, and for references, definitions and abbreviations. Where additional references, definitions and abbreviations are required specifically for LNG hoses, they are listed in this European Standard.
Transfer hoses need to be durable when operating in the marine environment and to be flexible with a minimum bending radius compatible with handling and the operating requirements of the transfer system.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20257-1:2020(Main)
Installation and equipment for liquefied natural gas - Design of floating LNG installations - Part 1: General requirements (ISO 20257-1:2020)
EN ISO 20257-1:2020

The objective of ISO 20257-1 is to provide functional guidelines and recommend practices for the design of floating liquefied natural gas (LNG) installations in order to have a safe and environmentally acceptable design and operation of floating LNG installations.
ISO 20257 gives functional guidelines for the design and operation of all floating LNG installations including those for the liquefaction, storage, vaporisation, transfer and handling of LNG.

  • Standard
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    200 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 17452:2020(Main)
Natural gas fuelling stations - Guidance for implementation of European standards on CNG and LNG stations for fuelling vehicles
CEN/TR 17452:2020

This document provides guidance to support organizations with the implementation of the European standards on CNG and LNG stations for fuelling vehicles (i.e. EN-ISO 16923:2018 and EN-ISO 16924:2018, respectively).
This document cross-references European standards to the international standards listed in EN-ISO 16923:2018 and EN-ISO 16924:2018 and links these standards to relevant European Directives, where applicable.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day