SIST EN ISO 29465:2022
(Main)Thermal insulating products for building applications - Determination of length and width (ISO 29465:2022)
Thermal insulating products for building applications - Determination of length and width (ISO 29465:2022)
This document specifies the equipment and procedures for determining the length and width of full‑size products. It is applicable to thermal insulating products.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Länge und Breite (ISO 29465:2022)
Dieses Dokument legt die Prüfeinrichtungen und Verfahren zum Bestimmen der Länge und Breite von Produkten in Liefermaßen fest. Es gilt für Wärmedämmstoffe.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la longueur et de la largeur (ISO 29465:2022)
Le présent document spécifie l’équipement et les modes opératoires permettant de déterminer la longueur et la largeur des produits en vraies dimensions. Il s’applique aux produits isolants thermiques.
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje širine in dolžine (ISO 29465:2022)
Ta evropski standard določa opremo in postopke za ugotavljanje dolžine in širine proizvodov naravne velikosti. Uporablja se za toplotnoizolacijske proizvode.
General Information
- Status
- Published
- Public Enquiry End Date
- 15-Jul-2021
- Publication Date
- 10-Oct-2022
- Technical Committee
- TOP - Thermal insulation
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 26-Sep-2022
- Due Date
- 01-Dec-2022
- Completion Date
- 11-Oct-2022
Relations
- Effective Date
- 01-Nov-2022
Overview
The SIST EN ISO 29465:2022 standard, titled Thermal insulating products for building applications - Determination of length and width, specifies precise equipment and procedures to measure the length and width of full-size thermal insulating products used in construction. Published by CEN and aligned with ISO 29465:2022, this standard replaces the earlier EN 822:2013, providing updated test methods to ensure consistent, accurate dimensional measurements vital for product quality and compliance.
This document applies to a broad range of thermal insulating products utilized in building applications, focusing on standardizing measurements that impact installation, performance, and quality control.
Key Topics
Scope and Purpose
- Applies to full-size thermal insulation products for buildings.
- Defines test procedures to determine length and width with high precision.
Equipment and Apparatus
- Requires a flat surface and a metal rule or tape graduated in millimeters with at least 0.5 mm readability.
- Alternative measuring instruments with comparable accuracy are acceptable.
Test Specimen Preparation
- Testing involves full-size products.
- The number of specimens depends on relevant product standards or mutual agreement.
- Conditioning at (23 ± 5) °C for at least 6 hours is mandatory; stricter conditioning applies in disputes or tropical climates.
Measurement Procedure
- Specimen placed flat; measurements taken according to size:
- For dimensions ≤ 1.5 m, one measurement each of length (longer dimension) and width (shorter dimension).
- For specimens > 1.5 m length, multiple width measurements spaced evenly, with the mean width calculated.
- For specimens > 1.5 m width, multiple length measurements spaced evenly.
- Measurements are recorded to the nearest millimeter.
- Specimen placed flat; measurements taken according to size:
Test Conditions
- Standard ambient conditions: (23 ± 5) °C, with humidity at (50 ± 5)% RH for stringent cases.
- Alternative conditions for tropical climates: (27 ± 2) °C, (65 ± 5)% RH, documented in reports.
Reporting and Accuracy
- Test reports must reference ISO 29465:2022 and provide detailed product identification, testing specifics, conditioning, deviations, and measurement results.
- Accuracy details to be addressed in future revisions.
Applications
SIST EN ISO 29465:2022 ensures that manufacturers, testers, and regulators obtain reliable measurements of thermal insulation products, which directly affect:
- Quality control during production runs, ensuring dimensional conformity.
- Regulatory compliance with building codes and standards.
- Installation efficiency since correct dimensions guarantee proper fitting and thermal performance.
- Product specification verification for architects, designers, and contractors.
- Facilitates international trade by providing a harmonized standard, reducing disputes related to product dimensions.
This standard is essential for:
- Manufacturers of mineral wool, foam, and other thermal insulating boards or rolls.
- Construction companies requiring assured product dimensions.
- Laboratories conducting thermal product testing and certification.
- Standardization bodies and certification authorities.
Related Standards
- EN 822:2013 – Former standard for length and width determination, now superseded by SIST EN ISO 29465:2022.
- Other ISO and CEN standards covering thermal insulation product testing methods and performance assessment.
- National standards aligned with SIST EN ISO 29465:2022 within CEN member countries, ensuring uniform application.
- ISO/TC 163 series covering thermal performance and energy use in buildings.
Keywords: SIST EN ISO 29465:2022, thermal insulating products, building applications, length measurement, width measurement, thermal insulation testing, CEN standards, ISO thermal insulation, product dimension standards, thermal product quality control, building insulation compliance.
Frequently Asked Questions
SIST EN ISO 29465:2022 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Thermal insulating products for building applications - Determination of length and width (ISO 29465:2022)". This standard covers: This document specifies the equipment and procedures for determining the length and width of full‑size products. It is applicable to thermal insulating products.
This document specifies the equipment and procedures for determining the length and width of full‑size products. It is applicable to thermal insulating products.
SIST EN ISO 29465:2022 is classified under the following ICS (International Classification for Standards) categories: 91.100.60 - Thermal and sound insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 29465:2022 has the following relationships with other standards: It is inter standard links to SIST EN 822:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 29465:2022 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2022
Nadomešča:
SIST EN 822:2013
Toplotno izolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje širine in
dolžine (ISO 29465:2022)
Thermal insulating products for building applications - Determination of length and width
(ISO 29465:2022)
Wärmedämmstoffe für das Bauwesen - Bestimmung der Länge und Breite (ISO
29465:2022)
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la
longueur et de la largeur (ISO 29465:2022)
Ta slovenski standard je istoveten z: EN ISO 29465:2022
ICS:
91.100.60 Materiali za toplotno in Thermal and sound insulating
zvočno izolacijo materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 29465
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2022
EUROPÄISCHE NORM
ICS 91.100.60 Supersedes EN 822:2013
English Version
Thermal insulating products for building applications -
Determination of length and width (ISO 29465:2022)
Produits isolants thermiques destinés aux applications Wärmedämmstoffe für das Bauwesen - Bestimmung
du bâtiment - Détermination de la longueur et de la der Länge und Breite (ISO 29465:2022)
largeur (ISO 29465:2022)
This European Standard was approved by CEN on 8 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29465:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 29465:2022) has been prepared by Technical Committee ISO/TC 163/SC 1
"Test and measurement methods" in collaboration with Technical Committee CEN/TC 88 “Thermal
insulating materials and products” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by September 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 822:2013.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 29465:2022 has been approved by CEN as EN ISO 29465:2022 without any modification.
INTERNATIONAL ISO
STANDARD 29465
Second edition
2022-08
Thermal insulating products
for building applications —
Determination of length and width
Produits isolants thermiques destinés aux applications du bâtiment —
Détermination de la longueur et de la largeur
Reference number
ISO 29465:2022(E)
ISO 29465:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 29465:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Test specimens . 2
6.1 Dimensions of test specimens . 2
6.2 Number of test specimens . 2
6.3 Conditioning of test specimens . 2
7 Procedure .2
7.1 Test conditions . 2
7.2 Test procedure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...