SIST EN 62087-3:2016

SLOVENSKI STANDARD
SIST EN 62087-3:2016
01-julij-2016
1DGRPHãþD
SIST EN 62087:2012
$YGLRYLGHRLQSULSDGDMRþDRSUHPD8JRWDYOMDQMHSRUDEHHQHUJLMHGHO
7HOHYL]LMVNLVSUHMHPQLN,(&
Audio, video, and related equipment - Determination of power consumption -- Part 3:
Television sets (IEC 62087-3:2015)
Messverfahren für die Leistungsaufnahme von Audio-, Video- und verwandten Geräten -
Teil 3: Fernsehgeräte (IEC 62087-3:2015)
Appareils audio, vidéo et matériel connexe - Détermination de la consommation de
puissance - Partie 3: Téléviseurs (IEC 62087-3:2015)
Ta slovenski standard je istoveten z: EN 62087-3:2016
ICS:
17.220.20 0HUMHQMHHOHNWULþQLKLQ Measurement of electrical
PDJQHWQLKYHOLþLQ and magnetic quantities
33.160.25 Televizijski sprejemniki Television receivers
SIST EN 62087-3:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62087-3:2016

---------------------- Page: 2 ----------------------

SIST EN 62087-3:2016


EUROPEAN STANDARD EN 62087-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
February 2016
ICS 33.160.10 Supersedes EN 62087:2012 (partially)
English Version
Audio, video, and related equipment - Determination of power
consumption - Part 3: Television sets
(IEC 62087-3:2015)
Appareils audio, vidéo et matériel connexe - Détermination Messverfahren für die Leistungsaufnahme von Audio-,
de la consommation de puissance - Partie 3: Téléviseurs Video- und verwandten Geräten - Teil 3: Fernsehgeräte
(IEC 62087-3:2015) (IEC 62087-3:2015)
This European Standard was approved by CENELEC on 2015-07-10. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 62087-3:2016 E

---------------------- Page: 3 ----------------------

SIST EN 62087-3:2016
EN 62087-3:2016
European foreword
The text of document 100/2468/FDIS, future edition 1 of IEC 62087-3, prepared by Technical Area 12
“AV energy efficiency and smart grid applications” of IEC/TC 100 “Audio, video and multimedia
systems and equipment” was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 62087-3:2016.

The following dates are fixed:
• latest date by which the document has to be (dop) 2016-08-19
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2019-02-19
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 62087:2012 (partially).

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 62087-3:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

1)
IEC 62087:2008 NOTE Harmonized as EN 62087-2:2009 (not modified).
IEC 62087:2011 NOTE Harmonized as EN 62087-2:2012 (not modified).
IEC 62087 Series NOTE Harmonized as EN 62087 Series.
IEC 62087-4 NOTE Harmonized as EN 62087-4.
IEC 62087-5 NOTE Harmonized as EN 62087-5.
IEC 62087-6 NOTE Harmonized as EN 62087-6.
IEC 62542:2013 NOTE Harmonized as EN 62542:2013 (not modified).

1)
Superseded by EN 62087-2:2012 (IEC 62087:2011).
2

---------------------- Page: 4 ----------------------

SIST EN 62087-3:2016
EN 62087-3:2016
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.

NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu

Publication Year Title EN/HD Year

IEC 62087-1 2015 Audio, video, and related equipment - EN 62087-1 2016
Determination of power consumption -
Part 1: General
IEC 62087-2 2015 Audio, video, and related equipment - EN 62087-2 2016
Determination of power consumption -
Part 2: Signals and media
IEC 62301 (mod) 2011 Household electrical appliances - EN 50564 2011
Measurement of standby power

3

---------------------- Page: 5 ----------------------

SIST EN 62087-3:2016

---------------------- Page: 6 ----------------------

SIST EN 62087-3:2016




IEC 62087-3

®


Edition 1.0 2015-06




INTERNATIONAL



STANDARD









colour

inside










Audio, video, and related equipment – Determination of power consumption –

Part 3: Television sets



























INTERNATIONAL

ELECTROTECHNICAL


COMMISSION





ICS 33.160.10 ISBN 978-2-8322-2683-4



  Warning! Make sure that you obtained this publication from an authorized distributor.


® Registered trademark of the International Electrotechnical Commission

---------------------- Page: 7 ----------------------

SIST EN 62087-3:2016
– 2 – IEC 62087-3:2015 © IEC 2015
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 9
4 Specification of operating modes and functions . 10
4.1 Table of operating modes and functions . 10
4.2 Configurations and picture settings . 12
4.2.1 Conceptual framework . 12
4.2.2 Selection of home configuration . 12
4.2.3 Selection of retail configuration . 12
5 Measurement conditions . 13
5.1 General . 13
5.2 Power source . 13
5.3 Environmental conditions . 13
5.4 Ambient light conditions . 13
5.5 Measuring equipment . 13
5.5.1 Power measuring instrument . 13
5.5.2 Luminance measuring device . 13
5.5.3 Illuminance measuring instrument . 13
5.6 Signal generation . 13
5.6.1 Equipment . 13
5.6.2 Interfaces . 13
5.6.3 Accuracy . 13
5.6.4 Light source for specific illuminance levels . 14
5.6.5 Light source for disabling the ABC feature . 14
5.6.6 Networking equipment . 14
6 Procedures . 15
6.1 Order of activities. 15
6.2 Preparation . 15
6.2.1 Measuring plan . 15
6.2.2 Power source voltage and frequency . 16
6.2.3 Input terminals . 16
6.2.4 Video signal, On mode power consumption procedure . 16
6.2.5 Video signal, peak luminance ratio determination . 17
6.2.6 Video format . 17
6.2.7 Automatic brightness control capabilities . 17
6.2.8 Automatic brightness control levels . 18
6.2.9 Network connection capabilities . 18
6.3 Initial activities . 18
6.3.1 Order of initial activities . 18
6.3.2 Cool down . 19
6.3.3 Main batteries . 19
6.3.4 Plug-in module . 19

---------------------- Page: 8 ----------------------

SIST EN 62087-3:2016
IEC 62087-3:2015 © IEC 2015 – 3 –
6.3.5 Installation . 19
6.3.6 Application of input signals . 20
6.3.7 Luminance measuring device setup . 20
6.3.8 Light source setup . 20
6.3.9 Power on . 21
6.3.10 TV settings . 21
6.4 Determination of power consumption, On mode . 22
6.4.1 Order of activities . 22
6.4.2 Stabilization . 23
6.4.3 Television sets without automatic brightness control enabled by default . 24
6.4.4 Television sets with automatic brightness control enabled by default . 24
6.4.5 Power measurement . 24
6.5 Determination of peak luminance ratio and power factor . 26
6.5.1 General . 26
6.5.2 Activities for peak luminance ratio and power factor determination . 26
6.6 Determination of power consumption, Partial On mode . 28
6.6.1 General . 28
6.6.2 Order of activities . 29
6.6.3 AV inputs . 29
6.6.4 Standby-passive . 29
6.6.5 Standby-active, low . 29
6.7 Determination of power consumption, Off mode . 30
6.7.1 Connections and networking . 30
6.7.2 Availability . 31
6.7.3 Measurement . 31
Annex A (informative) Considerations for On mode television set power measurements . 32
A.1 General . 32
A.2 Illuminance levels for automatic brightness control . 32
A.3 Weighting of automatic brightness control levels . 32
A.4 Calculating On mode power consumption . 33
A.5 Picture level adjustments . 34
Annex B (normative) Test report . 35
Annex C (informative) Example test report template. 37
Bibliography . 40

Figure 1 – Configurations and picture settings, conceptual framework . 12
Figure 2 – Recommended order of activities . 15
Figure 3 – Order of initial activities. 19
Figure 4 – Light source configuration . 21
Figure 5 – Order of activities for determining power consumption, On mode . 23
Figure 6 – Order of activities for determining peak luminance ratio and power factor . 27
Figure 7 – Order of activities for determining the power consumption, Partial On mode . 29

Table 1 – Operating modes and functions . 11

---------------------- Page: 9 ----------------------

SIST EN 62087-3:2016
– 4 – IEC 62087-3:2015 © IEC 2015
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

AUDIO, VIDEO, AND RELATED EQUIPMENT –
DETERMINATION OF POWER CONSUMPTION –

Part 3: Television sets

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62087-3 has been prepared by technical area 12: AV energy
efficiency and smart grid applications, of IEC technical committee 100: Audio, video and
multimedia systems and equipment.
This first edition of IEC 62087-3 cancels and replaces Clauses 6 and 11 and Annex B of
IEC 62087:2011. This standard together with IEC 62087-1 to IEC 62087-2 and IEC 62087-4 to
IEC 62087-6 cancels and replaces IEC 62087:2011 in its entirety. This edition constitutes a
technical revision.
This edition includes the following significant technical changes with respect to Clauses 6 and
11 and Annex B of IEC 62087:2011.
– For TVs with an automatic brightness control feature, power may now be measured at
multiple specific illumination levels.
– A method has been defined for determining the ratio of peak luminance expected in the
home versus the peak luminance expected in the retail environment.

---------------------- Page: 10 ----------------------

SIST EN 62087-3:2016
IEC 62087-3:2015 © IEC 2015 – 5 –
– Sections related to general measuring conditions and procedures are now in
IEC 62087-1:2015.
– Sections related to signals and media are now in IEC 62087-2:2015.
– The titles have changed in order to comply with the current directives and to accommodate
the multipart structure.
The text of this standard is based on the following documents:
FDIS Report on voting
100/2468/FDIS 100/2498/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
A list of all parts in the IEC 62087 series, published under the general title Audio, video, and
related equipment – Determination of power consumption, can be found on the IEC website.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.

---------------------- Page: 11 ----------------------

SIST EN 62087-3:2016
– 6 – IEC 62087-3:2015 © IEC 2015
INTRODUCTION
This standard specifies the determination of the power consumption of television sets for
consumer use. It is used in conjunction with IEC 62087-2:2015, which specifies signals and
media.
This standard includes measuring procedures for the determination of power consumption in
the On (operation) mode, which was identified as “On (average) mode” in previous editions of
IEC 62087. Additionally, it specifies measuring procedures for the determination of power
consumption in the Off mode and Partial On mode. This standard also defines the
determination of the peak luminance ratio for use associated with television set power
consumption evaluation as well as the power factor.
A verification procedure to assess product compliance is described in Annex A of
IEC 62087-1:2015.
IEC 62087 has been subdivided and currently consists of the following planned or published
parts:
– Part 1: General
– Part 2: Signals and media
– Part 3: Television sets
– Part 4: Video recording equipment
– Part 5: Set top boxes
– Part 6: Audio equipment

---------------------- Page: 12 ----------------------

SIST EN 62087-3:2016
IEC 62087-3:2015 © IEC 2015 – 7 –
AUDIO, VIDEO, AND RELATED EQUIPMENT –
DETERMINATION OF POWER CONSUMPTION –

Part 3: Television sets



1 Scope
This part of IEC 62087 specifies the determination of the power consumption and related
characteristics of television sets. Television sets include, but are not limited to, those with
CRT, LCD, PDP, OLED, or projection technologies.
The operating modes and functions, as they specifically apply to television sets, are defined
in detail in this part of IEC 62087.
This standard is limited to television sets that can be connected to an external power source.
Television sets that include a non-removable, main battery are not covered by this standard.
Television sets may include any number of auxiliary batteries.
The measuring conditions in this standard represent the normal use of the equipment and
may differ from specific conditions, for example as specified in safety standards.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 62087-1:2015, Audio, video, and related equipment – Determination of power
consumption – Part 1: General
IEC 62087-2:2015, Audio, video, and related equipment – Determination of power
consumption – Part 2: Signals and media
IEC 62301:2011, Household electrical appliances – Measurement of standby power
3 Terms, definitions, and abbreviations
3.1 Terms and definitions
For the purposes of this document, the terms, definitions and abbreviations, in
IEC 62087-1:2015, IEC 62087-2:2015, and the following apply.
3.1.1
additional functions
functions that are not required for the basic operation of the device
Note 1 to entry: Examples of additional functions include, but are not limited to, a VCR unit, a DVD unit, an HDD
unit, an FM-radio unit, a memory card-reader unit, or an ambient lighting unit.

---------------------- Page: 13 ----------------------

SIST EN 62087-3:2016
– 8 – IEC 62087-3:2015 © IEC 2015
3.1.2
brightest selectable preset picture setting
user selectable, preset picture setting that produces the highest luminance picture in the
home or default configuration
Note 1 to entry: See Figure 1.
3.1.3
conditional access
encryption, decryption, and authorization techniques employed to protect content from
unauthorized viewing
3.1.4
conditional access module
plug-in module that enables conditional access
3.1.5
category 5e cable
twisted pair cable used for computer networks
Note 1 to entry: See IEC 61156-5 and IEC 61156-6.
3.1.6
default configuration
configuration for television sets without a forced menu
Note 1 to entry: See Figure 1.
3.1.7
default picture setting
out-of-the-box picture setting for television sets in the home or default configuration
Note 1 to entry: See Figure 1.
3.1.8
forced menu
configuration selection required of the user when a television set is turned on for the first time
that forces the user to choose between the home configuration and the retail configuration
Note 1 to entry: See Figure 1.
3.1.9
home configuration
forced menu selection most likely to be chosen for home use
Note 1 to entry: Subclause 4.2.2 describes the selection of home configuration from the forced menu. This
configuration selection is generally named “home”, “standard”, or equivalent.
Note 2 to entry: See Figure 1.
3.1.10
neutral density filter
ND filter
optical device that reduces the light intensity in the visible wavelength region
3.1.11
overall brightest preset picture setting
either the retail picture setting or the brightest selectable preset picture setting, whichever
produces the highest luminance picture
Note 1 to entry: See Figure 1.

---------------------- Page: 14 ----------------------

SIST EN 62087-3:2016
IEC 62087-3:2015 © IEC 2015 – 9 –
3.1.12
plug-in module
device that plugs into television sets to provide additional functionality
3.1.13
point of deployment module
conditional access module for digital signal reception
3.1.14
quick start
feature that, when enabled, presents sound and picture quickly when switching from Partial
On mode to On mode
3.1.15
retail configuration
forced menu selection most likely to be chosen for use in a retail environment
Note 1 to entry: Subclause 4.2.3 describes the selection of retail configuration from the forced menu. This
configuration selection is generally recommended by the manufacturer for presentation in a public space when the
television set is offered for sale and might be named “retail”, “store”, “shop”, or equivalent.
Note 2 to entry: See Figure 1.
3.1.16
retail picture setting
out-of-the-box picture setting for television sets with a forced menu in the retail configuration
Note 1 to entry: See Figure 1.
3.1.17
selectable preset picture setting
TV picture setting that is selectable by a user from a set of manufacturer-defined picture
settings
Note 1 to entry: See Figure 1.
3.1.18
special functions
functions that are related to, but not required for, the basic operation of the device
Note 1 to entry: Examples of special functions include, but are not limited to, special sound processing, power
saving functions (e.g. automatic brightness control).
3.1.19
television set
TV
equip
...