oSIST prEN 14187-7:2014

SLOVENSKI STANDARD
oSIST prEN 14187-7:2014
01-december-2014
Hladno nanosljive tesnilne mase za stike - Preskusne metode - 7. del: Ugotavljanje
odpornosti proti plamenu
Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to
flame
Kalt verarbeitbare Fugenmassen - Prüfverfahren - Teil 7: Bestimmung des Widerstandes
gegen Flammen
Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 7: Détermination de la
résistance à la flamme
Ta slovenski standard je istoveten z: prEN 14187-7
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 14187-7:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14187-7:2014

---------------------- Page: 2 ----------------------
oSIST prEN 14187-7:2014

EUROPEAN STANDARD
DRAFT
prEN 14187-7
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2014
ICS 13.220.50; 93.080.20 Will supersede EN 14187-7:2003
English Version
Cold applied joint sealants - Test methods - Part 7:
Determination of the resistance to flame
Mastics pour joints appliqués à froid - Méthodes d'essai - Kalt verarbeitbare Fugenmassen - Prüfverfahren - Teil 7:
Partie 7: Détermination de la résistance à la flamme Bestimmung des Widerstandes gegen Flammen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14187-7:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14187-7:2014
prEN 14187-7:2014 (E)
Contents
Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Principle .4
5 Apparatus and materials .4
6 Preparation of test specimens .4
7 Procedure .4
8 Test report .6


2

---------------------- Page: 4 ----------------------
oSIST prEN 14187-7:2014
prEN 14187-7:2014 (E)
Foreword
This document (prEN 14187-7:2014) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 14187-7:2003.
This European Standard is one of a series of standards as listed below:
EN 14187-1, Cold applied joint sealants — Test methods — Part 1: Determination of rate
...