iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50212:2001

(Main)

Connectors for thermoelectric sensors

Connectors for thermoelectric sensors

The object of this standard is to determine composition, nature of materials, manufacturing tests and thermoelectric behaviour, of connectors for sensors using thermocouples according to HD 446.3 S1. The latter standard does not cover such special thermocouples as U.L. and W types; nevertheless the user of such special thermocouples may use the connectors described in the standard with some restrictions mentioned in the relevant paragraphs

Steckverbindungen für Thermoelemente

Connecteurs pour couples thermoélectriques

Connectors for thermoelectric sensors

General Information

Status
Withdrawn
Publication Date
31-Mar-2001
Withdrawal Date
02-Feb-2023
ICS
17.200.20 - Temperature-measuring instruments
Technical Committee
MOV - Measuring equipment for electromagnetic quantities
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
02-Feb-2023
Due Date
25-Feb-2023
Completion Date
03-Feb-2023
Ref Project
EN 50212:1996 - Connectors for thermoelectric sensors

Relations

Replaced By
SIST EN 50212:2020 - Connectors for thermoelectric sensors
Effective Date
05-May-2020
Replaced By
SIST EN 50212:2020 - Connectors for thermoelectric sensors
Effective Date
07-Jun-2022

Buy Standard

EN 50212:2001EN 50212:2001
PreviousNext
Standard
EN 50212:2001
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50212:2001
01-april-2001
Connectors for thermoelectric sensors
Connectors for thermoelectric sensors
Steckverbindungen für Thermoelemente
Connecteurs pour couples thermoélectriques
Ta slovenski standard je istoveten z: EN 50212:1996
ICS:
17.200.20 Instrumenti za merjenje Temperature-measuring
temperature instruments
SIST EN 50212:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50212:2001

---------------------- Page: 2 ----------------------

SIST EN 50212:2001

---------------------- Page: 3 ----------------------

SIST EN 50212:2001

---------------------- Page: 4 ----------------------

SIST EN 50
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61557-11:2022(Main)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCM) in TT, TN and IT systems (IEC 61557-11:2020)
EN IEC 61557-11:2022

IEC 61557-11:2009 specifies the requirements for testing equipment applied to the testing of the effectiveness of residual current monitors (RCMs) of type A and type B, which are already installed in distribution systems. This test equipment can be used in any kind of network like a TN, TT or IT system. The test equipment may also be used for testing directionally discriminating RCMs in IT-Systems.This part is to be used in conjunction with IEC 61557-1:2007, Part 1: General requirements.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60751:2022(Main)
Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2022)
EN IEC 60751:2022

This International Standard specifies the requirements, in addition to the resistance versus
temperature relationship, for both industrial platinum resistance thermometers (later referred to
as "thermometers") and industrial platinum resistance temperature sensors (later referred to as
"platinum resistors") whose electrical resistance is derived from defined functions of
temperature.
Values of temperature in this document are in terms of the International Temperature Scale of
1990, ITS-90. A temperature in the unit °C of this scale is denoted by the symbol t, except in
Table A.1 where the full nomenclature t90 /°C is used.
This document applies to platinum resistors whose temperature coefficient α, defined as
is conventionally written as α = 3,851⋅10-3 °C-1, where R100 is the resistance at t = 100 °C and R0 is the resistance at t = 0 °C.
This document covers platinum resistors and thermometers for the temperature range −200 °C
to +850 °C with different tolerance classes. It can also cover particular platinum resistors or
thermometers for a part of this temperature range.
For resistance versus temperature relationships with uncertainties less than 0,1 °C, which are
possible only for platinum resistors or thermometers with exceptionally high stability and
individual calibration, a more complex interpolation equation than is presented in this document
can be necessary. The specification of such equations is outside the scope of this document.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61557-6:2022(Main)
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems (IEC 61557-6:2019)
EN IEC 61557-6:2021

This part of IEC 61557 specifies the requirements applicable to measuring equipment for
testing the effectiveness of protective measures of residual current devices (RCD) installed in
TT, TN and IT systems.
It is not the purpose of this document to verify the RCD according to their product standards.
NOTE Applicable tripping tests for time and current of RCD are listed in Annex A, Table A.1

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60584-3:2021(Main)
Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system (IEC 60584-3:2021)
EN IEC 60584-3:2021

It is necessary for thermocouple temperature measurement that the electro-motive force (abbreviated
as e.m.f. hereafter) of the thermocouple circuit is precisely measured by a measuring
instrument. A thermocouple is electrically connected to the instrument by a proper pair of
electric cables. IEC 60584-3 standardizes these cables. It specifies identification and manufacturing
tolerances for extension and compensating cables (mineral insulated extension and
compensating cables are not included) provided directly to users of industrial processes.
These tolerances are determined with respect to the e.m.f. versus temperature relationship of
IEC 60584-1. The requirements for extension and compensating cables for use in industrial
process control are specified.
Extension and compensating cables may consist of a single strand (solid) wire or multistranded
wire for which this document is applied. Specification for extension and compensating
conductors of forms of rods, flat wires or strips can be established by agreement between
suppliers and users.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50212:2020(Main)
Connectors for thermoelectric sensors
EN 50212:2020

The object of this document is to determine the composition, nature of materials, manufacturing tests and thermoelectronic behaviour of connectors for sensors using thermocouples according to EN 60584-3:2008.This document does not cover such special thermocouples as U, L and W types; nevertheless, the user of such special thermocouples can use the connectors described hereafter with some restrictions mentioned in the relevant paragraphs.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62828-3:2018(Main)
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters (IEC 62828-3:2018)
EN IEC 62828-3:2018

This part of IEC 62828 establishes specific procedures for testing temperature transmitters
used in measuring and control systems for industrial process and for machinery control
systems.
When the process measurement transmitter features the temperature transmitter separated
from the sensing element (RTD, TC, etc.), the standard applies only to the temperature
transmitter without the sensing element. In case of device where the sensing element is fully
integrated with the temperature transmitter, the standard applies to the complete device.
For general test procedures, reference is made to IEC 62828-1, which is applicable to all
types of industrial and process measurement transmitters (PMT).
NOTE In the industrial and process applications, to indicate the process measurement transmitters, it is common
also to use the terms “industrial transmitters”, or “process transmitters”.
The sensing element itself (e.g., RTD, TC, etc.) as well as radiation thermometers are
excluded from the scope of this document.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61515:2017(Main)
Mineral insulated metal sheathed thermocouple cables and thermocouples (IEC 61515:2016)
EN 61515:2016

This International Standard establishes the requirements for simplex, duplex and triplex
mineral-insulated metal-sheathed thermocouple cables and thermocouples, which are intended
for use in general industrial applications. The abbreviation MIMS (for “mineral-insulated
metal-sheathed”) will be used hereafter. It covers thermocouple cables and thermocouples with
only base-metal conductors of Types T, J, E, K and N. The specifications in this standard apply
to new thermocouple cables and thermocouple units as delivered to the user. They do not apply
to the product after use.
External seals, terminations, connections and other accessories are not within the scope of this
International Standard.
This standard does not apply to precious metal thermocouple cables and thermocouples. The
special requirements for nuclear primary loop applications are dealt with in the other standards.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60584-1:2014(Main)
Thermocouples - Part 1: EMF specifications and tolerances (IEC 60584-1:2013)
EN 60584-1:2013

This part of IEC 60584 specifies reference functions and tolerances for letter-designated thermocouples (Types R, S, B, J, T, E, K, N, C and A). Temperatures are expressed in degrees Celsius based on the International Temperature Scale of 1990, ITS-90 (symbol t90), and the EMF (symbol E) is in microvolts. The reference functions are polynomials which express the EMF, E in μV, as a function of temperature t90 in °C with the thermocouple reference junctions at 0 °C. Values of EMF at intervals of 1 °C are tabulated in Annex A. For convenience of calculating temperatures, inverse functions are given in Annex B which express temperature as functions of EMF within stated accuracies. This International Standard specifies the tolerances for thermocouples manufactured in accordance with this standard. The tolerance values are for thermocouples manufactured from wires, normally in the diameter range 0,13 mm to 3,2 mm, as delivered to the user and do not allow for calibration drift during use. Annex C gives guidance on the selection of thermocouples with regard to temperature range and environmental conditions.

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62460:2009
Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations
EN 62460:2008

This International Standard specifies the equations and reference tables relating temperature to EMF (electro-motive force) for Gold versus Platinum and Platinum versus Palladium thermocouples. For information and convenience of use it also provides the approximate equations for temperature as functions of EMF. The tables and equations in this standard are intended for use with thermocouples made from elements of purity not less than 99.999 % for Platinum and Gold and of 99.99 % for Palladium, by weight. Tolerances on initial values of EMF versus temperature have not been established for the thermocouples in this standard. Where required, these tolerances should be agreed between the wire manufacturer and the user. Temperatures in this standard are based on the International Temperature Scale of 1990 (ITS-90). They are expressed in degrees Celsius, symbol t90. Values of EMF, symbol E/ V, are given in microvolts. This standard does not cover extension or compensating wires for use with the pure-element thermocouples. The questions of their use shall be agreed between the manufacturer and the user.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60751:2009
Industrial platinum resistance thermometers and platinum temperature sensors
EN 60751:2008

This standard specifies the requirements and temperature/resistance relationship for industrial platinum resistance temperature sensors later referred to as platinum resistors or "resistors" and industrial platinum resistance thermometers later referred to as "thermometers" whose electrical resistance is a defined function of temperature. The standard covers resistors or thermometers for all or part of the temperature range -200 °C to +850 °C with different tolerance classes, which may cover restricted temperature ranges.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day