iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 60555-2:1995

(Main)

Disturbances in supply systems caused by household appliances and similar electrical equipment -- Part 2: Harmonics

Disturbances in supply systems caused by household appliances and similar electrical equipment -- Part 2: Harmonics

This standard is applicable to electrical and electronic equipment for household and similar use, intended to be connected to low-voltage a.c. distribution systems of the following types: nominal voltages up to 240 V, single-phase, two or three wire, nominal voltages up to 415 V, three-phase, three or four wire; nominal frequency 50 Hz or 60 Hz. Examples of electrical equipment to which this standard applies are appliances for cooking and heating, motor-operated or magnetically driven appliances, portable tools, light dimmers and radio and television receivers. This standard is not applicable to: equipment subject to notification to or consent by the supply authority before connection to the system; equipment intended exclusively for professional purposes.

Rückwirkungen in Stromversorgunsnetzen, die durch Haushaltgeräte und durch ähnliche einrichtungen verursacht werden -- Teil 2: Oberschwingungen

Perturbations produites dans les réseaux d'alimentation par les appareils électrodomestiques et les équipements analogues -- Partie 2: Harmoniques

Disturbances in supply systems caused by household appliances and similar electrical equipment - Part 2: Harmonics

General Information

Status
Withdrawn
Publication Date
31-Mar-1995
Withdrawal Date
28-Feb-1997
ICS
29.240.01 - Power transmission and distribution networks in general
Technical Committee
EMC - Electromagnetic compatibility
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Mar-1997
Due Date
01-Mar-1997
Completion Date
01-Mar-1997
Directive
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
EN 60555-2:1987 - Disturbances in supply systems caused by household appliances and similar electrical equipment - Part 2: Harmonics

Relations

Revised
SIST EN 61000-3-2:1997 - Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
Effective Date
13-May-2010
Replaced By
SIST EN 61000-3-2:1997 - Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
Effective Date
29-Jan-2023
Replaced By
SIST EN 61000-3-2:1997 - Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
Effective Date
07-Jun-2022

Buy Standard

EN 60555-2 1995EN 60555-2 1995
PreviousNext
Standard
EN 60555-2 1995
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60555-2:1995
01-april-1995
Disturbances in supply systems caused by household appliances and similar
electrical equipment - Part 2: Harmonics
Disturbances in supply systems caused by household appliances and similar electrical
equipment -- Part 2: Harmonics
Rückwirkungen in Stromversorgunsnetzen, die durch Haushaltgeräte und durch ähnliche
einrichtungen verursacht werden -- Teil 2: Oberschwingungen
Perturbations produites dans les réseaux d'alimentation par les appareils
électrodomestiques et les équipements analogues -- Partie 2: Harmoniques
Ta slovenski standard je istoveten z: EN 60555-2:1987
ICS:
29.240.01 2PUHåMD]DSUHQRVLQ Power transmission and
GLVWULEXFLMRHOHNWULþQHHQHUJLMH distribution networks in
QDVSORãQR general
SIST EN 60555-2:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60555-2:1995

---------------------- Page: 2 ----------------------

SIST EN 60555-2:1995

---------------------- Page: 3 ----------------------

SIST EN 60555-2:1995

---------------------- Page: 4 ----------------------

SIST EN 60555-2:1995

---------------------- Page: 5 ----------------------

SIST EN 6
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST IEC/TR 60816:1998(Main)
Guide on methods of measurement of short duration transients on low-voltage power and signal lines
IEC/TS 60816

Deals with transient phenomena which are not line-frequency related and are of duration no greater than 40 ms. Is also not concerned with sustained voltage changes or fluctuations. Has the status of a technical report.

  • Technical report
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50110-2:2023(Main)
Operation of electrical installations - Part 2: National annexes
EN 50110-2:2023

The European Standard EN 50110 series consists of two parts:
- the first part, EN 50110 1, contains minimum requirements valid for all CENELEC countries and some additional informative annexes dealing with safe working;
- the second part, prEN 50110 2, is a set of national annexes (one per each member country) which specify either additional safety requirements actually in force or national supplements to the minimum requirements set by EN 50110-1.
The national annexes are the responsibility of an have to be maintained by the respective member country.
National Committees shall notify CENELEC of any changes needed to their national annex.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50110-1:2023(Main)
Operation of electrical installations - Part 1: General requirements
EN 50110-1:2023

Revise the actual 11th edition of EN 50110-1:2013 start voting procedure and publish 12th edition.

  • Standard
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-692:2023(Main)
International Electrotechnical Vocabulary (IEV) - Part 692: Generation, transmission and distribution of electrical energy - Dependability and quality of service of electric power systems
IEC 60050-692:2017

IEC 60050-692:2017 gives the terminology used when considering the dependability and quality of service of electric power systems. The concepts are categorized according to the following sections:
- system concepts;
- operating states of electric power systems;
- failures in electric power systems;
- outages of electric power systems equipment;
- outage occurrences in electric power systems;
- state durations and availability related concepts;
- interruptions in electric power systems;
- selected customer interruption measures;
- bulk electric power system load/energy curtailments;
- bulk electric system failures and measures;
- supply performance measures.
This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    140 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    127 pages
    English and French language
    sale 15% off
SIST
SIST IEC 60050-826:2023(Main)
International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
IEC 60050-826 fF Ed.3.0

This part of IEC 60050 gives the general terminology used for electrical installations such as
those of residential, industrial or commercial premises. It does not cover systems for distribution
of energy to the public or power generation and transmission for such systems. This new edition
reviews and complements the previous one. An important aim of the revision is to achieve
compliance with IEC 61140:2016. In addition, some new terms have been added from
IEC 60364-8-1:2014 and IEC 60364-8-2:2018. It has the status of a horizontal publication in
accordance with IEC Guide 108, Guidelines for ensuring the coherence of IEC publications –
Horizontal functions, horizontal publications and their application.
This terminology is consistent with the terminology developed in the other specialized parts of
the IEV.
This horizontal publication is primarily intended for use by technical committees in the
preparation of IEC publications in accordance with the principles laid down in IEC Guide 108.
One of the responsibilities of a technical committee is, wherever applicable, to make use of
horizontal publications in the preparation of its publications

  • Standard
    126 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-614:2023(Main)
International Electrotechnical Vocabulary (IEV) - Part 614: Generation, transmission and distribution of electricity - Operation
IEC 60050-614:2016

IEC 60050-614:2016 gives the general terminology used in the generation, transmission and distribution of electricity, as well as general terms pertaining to specific applications and associated technologies. This terminology is consistent with the terminology developed in the other specialized parts of the IEV.
It has the status of a horizontal standard in accordance with IEC Guide 108.

  • Standard
    119 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    105 pages
    English and French language
    sale 15% off
SIST
SIST EN 62488-2:2017/AC:2023(Corrigendum)
Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC (IEC 62488-2:2017/COR2:2023)
EN 62488-2:2017/AC:2023-03
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50160:2023(Main)
Voltage characteristics of electricity supplied by public distribution networks
EN 50160:2022

1.1   Scope
This document specifies the main characteristics of the voltage at a network user's supply terminals in public low voltage, medium, high, and extra-high voltage AC electricity networks under normal operating conditions. This document specifies the limits or values within which the voltage characteristics can be expected to remain at any supply terminal in public European electricity networks, only.
NOTE 1   If non-public networks (e.g. residential quarters, energy communities, office centres, shopping centres) have similar end-users as public networks, it is strongly advised to apply the same requirements as for public networks.
NOTE 2   Industrial networks are excluded from the scope of EN 50160, only the connection to the supply terminals of the public network is relevant, here.
This document does not apply under abnormal operating conditions, including the following:
a)   a temporary supply arrangement to keep network users supplied during conditions arising as a result of a fault, maintenance and construction work, or to minimize the extent and duration of a loss of supply.
b)   in the case of non-compliance of a network user's installation or equipment with the relevant standards or with the technical requirements for connection, established either by the public authorities or the network operator, including the limits for the emission of conducted disturbances.
NOTE 4   A network user’s installation can include load and generation.
c)   in exceptional situations, in particular:
1)   exceptional weather conditions and other natural disasters;
2)   third party interference;
3)   acts by public authorities,
4)   industrial actions (subject to legal requirements);
5)   force majeure;
6)   power shortages resulting from external events.
The voltage characteristics given in this document refer to conducted disturbances in public electric power networks. They are not intended to be used as electromagnetic compatibility (EMC) levels or product emission limits.
Power quality is related to EMC in several ways – especially because compliance with power quality requirements depends on the control of cumulative effect of electromagnetic emissions from all/multiple equipment and/or installations. Therefore, the voltage characteristics given in this document gives guidance for specifying requirements in equipment product standards and in installation standards.
NOTE 5   The performance of equipment might be impaired if it is subjected to supply conditions which are not specified in the equipment product standard.
NOTE 6   This document can be superseded in total or in part by the terms of a contract between the individual network user and the network operator.
NOTE 7   The sharing of complaint management and problem mitigation costs between the involved parties is outside the scope of EN 50160.
Measurement methods to be applied in this document are described in EN 61000 4 30.
1.2   Object
The object of this document is to define, describe and specify the characteristics of the supply voltage concerning:
a)   Frequency;
b)   Magnitude;
c)   Waveform;
d)   Symmetry of the line voltages.
This document also covers the continuous characteristics of the supply voltage and other foreseeable phenomena which may influence the voltage characteristics, such as e.g. operational communication, monitoring or measurement signals which are transmitted via power lines.
These characteristics are subject to variations during the normal operation of a supply system due to changes of load, disturbances generated by certain equipment and the occurrence of faults which are mainly caused by external events.
The characteristics vary in a manner which is random in time, with reference to any specific supply terminal, and random in location, with reference to any given instant of time. Because of these variations, the values given in this document for the characteristics can be expected to be exceeded on a small number of occasions.
[...]

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50549-10:2023(Main)
Requirements for generating plants to be connected in parallel with distribution networks - Part 10: Tests for conformity assessment of generating units
EN 50549-10:2022

The purpose of this document is to provide technical guidance for tests on generating units and interface protection to evaluate their electrical characteristics.
NOTE 1    Mechanical issues are taken into account as far as they influence the electrical characteristics.
The evaluation results are intended to be used to demonstrate conformity of generating units to technical requirements for grid connection. In this context the evaluation results can also be used as part of a certification programme.
NOTE 2    Besides the type test results of the generating unit all additional elements for connection to the grid (e.g. transformer, cabling, multiple units) are considered in the evaluation of the final installation of a generating plant.
The requirements to be evaluated are covered in the following standardization documents:
–   EN 50549 1:2019: Requirements for generating plants to be connected in parallel with distribution networks - Part 1: connection to a LV distribution network - Generating plants up to and including Type B
–   EN 50549 2:2019: Requirements for generating plants to be connected in parallel with distribution networks - Part 2: Connection to a MV distribution network - Generating plants up to and including Type B
If grid connection requirements are dealt with in other documents or for other generating module types, where no specific testing procedure is provided, testing methods of this document can be used if applicable.
This document provides evaluation criteria for the conformity assessment of generating units with respect to the above mentioned standardization documents, based on type testing. However, some requirements are applicable on the generating plant level. The assessment of the conformity to these plant requirements are out of the scope of this document. Nevertheless, this document may be used to show the capabilities of a generating unit to be used in a plant.
As a consequence, it is possible that the conformity assessment of a generating unit does not cover all aspects of the above-mentioned standardization documents, typically when a requirement is evaluated on a plant level. Therefore, the conformity assessment report indicates clearly which clauses of this document are covered and which clauses are not covered.
This document recognizes the existence of specific technical test requirements within several member states that must be complied with.

  • Standard
    168 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61557-12:2022/AC:2022(Corrigendum)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 12: Power metering and monitoring devices (PMD) (IEC 61557-12:2018/COR1:2022)
EN IEC 61557-12:2022/AC:2022-09

IEC Corrected Version

  • Corrigendum
    4 pages
    French language
    sale 10% off
    e-Library read for
    1 day