iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 55014-1:2001

(Main)

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission

Applies to the conduction and the radiation of radio-frequency disturbances from appliances whose main functions are performed by motors and switching or regulating devices, unless the r.f. energy is intentionally generated or intended for illumination. Includes such equipment as: household electrical appliances, electric tools, regulating controls using semiconductor devices, motor-driven electromedical apparatus, electric toys, automatic dispensing machines as well as cinema or slide projectors.

Elektromagnetische Verträglichkeit - Anforderungen an Haushaltgeräte, Elektrowerkzeuge und ähnliche Elektrogeräte -- Teil 1: Störaussendung

Compatibilité électromagnétique - Exigences pour les appareils électrodomestiques, outillages électriques et appareils analogues -- Partie 1: Emission

S'applique aux perturbations radioélectriques conduites et rayonnées, produites par les appareils dont les fonctions principales sont assurées par des moteurs et par des dispositifs de commutation ou des dispositifs de régulation, sauf si le rayonnement RF est produit volontairement, ou destiné à l'éclairage. Concerne des appareils tels que: les appareils électrodomestiques, les outils électriques, les dispositifs de commande et de régulation comportant des dispositifs à semiconducteurs, les appareils électromédicaux à moteur, les jouets électriques, les distributeurs automatiques, les projecteurs de cinéma ou de diapositives.

Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission (CISPR 14-1:2000)

General Information

Status
Withdrawn
Publication Date
28-Feb-2001
Withdrawal Date
22-Dec-2009
ICS
33.100.10 - Emission
Technical Committee
EMC - Electromagnetic compatibility
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-Dec-2009
Due Date
31-Dec-2009
Completion Date
23-Dec-2009
Directive
2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
89/336/EEC - Electromagnetic compatibility (EMC)
Ref Project
EN 55014-1:2000 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

Relations

Replaced By
SIST EN 55014-1:2007 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
Effective Date
01-Mar-2007
Amended By
SIST EN 55014-1:2001/A2:2003 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
Effective Date
21-Sep-2010
Amended By
SIST EN 55014-1:2001/A1:2002 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
Effective Date
21-Sep-2010
Amended By
SIST EN 55014-1:2001/A2:2003 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
Effective Date
29-Jan-2023
Amended By
SIST EN 55014-1:2001/A1:2002 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
Effective Date
29-Jan-2023
Replaced By
SIST EN 55014-1:2007 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
Effective Date
29-Jan-2023
Replaced By
SIST EN 55014-1:2007 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
Effective Date
07-Jun-2022
Amended By
SIST EN 55014-1:2001/A1:2002 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
Effective Date
07-Jun-2022
Amended By
SIST EN 55014-1:2001/A2:2003 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission
Effective Date
07-Jun-2022
Replaces
SIST EN 55014-1:1995/A2:2000 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission - Product family standard
Effective Date
29-Jan-2023
Replaces
SIST EN 55014-1:2001/A1:1997 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission - Product family standard
Effective Date
29-Jan-2023
Replaces
SIST EN 55014:1995 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission - Product family standard
Effective Date
29-Jan-2023
Replaces
SIST EN 55014:1995 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission - Product family standard
Effective Date
07-Jun-2022
Replaces
SIST EN 55014-1:2001/A1:1997 - Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission - Product family standard
Effective Date
07-Jun-2022

Buy Standard

EN 55014-1:2001EN 55014-1:2001
PreviousNext
Standard
EN 55014-1:2001
English language
70 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 55014-1:2001
01-marec-2001
1DGRPHãþD
SIST EN 55014-1:1995/A2:2000
Electromagnetic compatibility - Requirements for household appliances, electric
tools and similar apparatus - Part 1: Emission (CISPR 14-1:2000)
Electromagnetic compatibility - Requirements for household appliances, electric tools
and similar apparatus -- Part 1: Emission
Elektromagnetische Verträglichkeit - Anforderungen an Haushaltgeräte,
Elektrowerkzeuge und ähnliche Elektrogeräte -- Teil 1: Störaussendung
Compatibilité électromagnétique - Exigences pour les appareils électrodomestiques,
outillages électriques et appareils analogues -- Partie 1: Emission
Ta slovenski standard je istoveten z: EN 55014-1:2000
ICS:
33.100.10 Emisija Emission
SIST EN 55014-1:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 2 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 3 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 4 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 5 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 6 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 7 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 8 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 9 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 10 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 11 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 12 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 13 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 14 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 15 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 16 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 17 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 18 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 19 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 20 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 21 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 22 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 23 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 24 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 25 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 26 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 27 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 28 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 29 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 30 ----------------------

SIST EN 55014-1:2001

---------------------- Page: 31 ----------------------

SIST EN 55014-1:2001

-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 55036:2020/A1:2023(Amendment)
Amendment 1 - Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz
EN IEC 55036:2020/A1:2023
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 55016-1-4:2019/A2:2023(Amendment)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements
EN IEC 55016-1-4:2019/A2:2023

No scope available

  • Amendment
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61000-4-20:2022(Main)
Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
EN IEC 61000-4-20:2022

This part of IEC 61000 focuses on emission and immunity test methods for electrical and
electronic equipment using various types of transverse electromagnetic (TEM) waveguides.
These types include open structures (for example striplines and electromagnetic pulse
simulators) and closed structures (for example TEM cells). These structures can be further
classified as one-port, two-port, or multi-port TEM waveguides. The frequency range depends
on the specific testing requirements and the specific TEM waveguide type.
The object of this document is to describe
– TEM waveguide characteristics, including typical frequency ranges and equipment-undertest (EUT) size limitations;
– TEM waveguide validation methods for electromagnetic compatibility (EMC) tests;
– the EUT (i.e. EUT cabinet and cabling) definition;
– test set-ups, procedures, and requirements for radiated emission measurements in TEM
waveguides; and
– test set-ups, procedures, and requirements for radiated immunity testing in TEM
waveguides.
NOTE Test methods are defined in this document to measure the effects of electromagnetic radiation on equipment
and the electromagnetic emissions from the equipment concerned. The simulation and measurement of
electromagnetic radiation is not adequately exact for the quantitative determination of effects for all end-use
installations. The test methods defined are structured for a primary objective of establishing adequate reproducibility
of results at various test facilities for qualitative analysis of effects.
This document does not intend to specify the tests to be applied to any particular apparatus or
system(s). The main intention of this document is to provide a general basic reference for all
interested product committees of the IEC. For radiated emission measurements, product
committees select emission limits and measurement methods in consultation with CISPR
standards. For radiated immunity testing, product committees remain responsible for the
appropriate choice of immunity tests and immunity test limits to be applied to equipment within
their scope. This document describes test methods that are separate from those of
IEC 61000‑4‑3 [34].1

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 55016-1-6:2015/A2:2022(Amendment)
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-6: Radio disturbance and immunity measuring appratus - EMC antenna calibration
EN 55016-1-6:2015/A2:2022
  • Amendment
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 55025:2022(Main)
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers
EN IEC 55025:2022

This document contains limits and procedures for the measurement of radio disturbances in the
frequency range of 150 kHz to 5 925 MHz. This document applies to vehicles, boats, internal
combustion engines, trailers, devices and any electronic/electrical component intended for use
in vehicles, boats, trailers and devices. Refer to International Telecommunications Union (ITU)
publications for details of frequency allocations. The limits are intended to provide protection
for on-board receivers installed (per the manufacturer’s guidelines) in a vehicle from
disturbances produced by components/modules in the same vehicle.
The receiver types to be protected are, for example, broadcast receivers (sound and television),
land mobile radio, radio telephone, amateur, citizens' radio, Satellite Navigation (GPS etc.), WiFi, V2X, and Bluetooth.
This document does not include protection of electronic control systems from radio frequency
(RF) emissions or from transient or pulse-type voltage fluctuations. These subjects are included
in ISO publications.
The limits in this document are recommended and subject to modification as agreed between
the customer (e.g. vehicle manufacturer) and the supplier (e.g. component manufacturer). This
document is also intended to be applied by vehicle manufacturers and suppliers which are to
be added and connected to the vehicle harness or to an on-board power connector after delivery
of the vehicle.
This document defines test methods for use by vehicle manufacturers and suppliers, to assist
in the design of vehicles and components and ensure controlled levels of on-board radio
frequency emissions.
The emission requirements in this document are not intended to be applicable to the intentional
transmissions from a radio transmitter as defined by the ITU including their spurious emissions.
NOTE 1 This exclusion is limited to those intended transmitter emissions, which leave the EUT as radiated
emissions and are coupled onto the wire line in the measurement setup. For conducted transmissions on frequencies
intentionally produced by the radio part of an EUT, this exclusion does not apply.
NOTE 2 It is usual for customers and suppliers to use radio regulation standards to manage the effect of spurious
emissions from a radio transmitter unless limits of spurious emission are agreed in the test plan.

  • Standard
    186 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-3-3:2014/A2:2022/AC:2022(Corrigendum)
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
EN 61000-3-3:2013/A2:2021/AC:2022-01

IEC Corrected version

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61000-3-3:2014/A2:2022(Amendment)
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
EN 61000-3-3:2013/A2:2021

The contents of the corrigendum of January 2022 have been included in this copy.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 55011:2016/A2:2021(Amendment)
Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
EN 55011:2016/A2:2021

2021-02-25: TC Off confirmed: can be published without link to legislation as agreed by BT D162/C064, link removed
2019-12-02: NEXT ACTION: TC to prepare ZZ
2019-12-02: TC decision to further process document
2019-01-28 - Assessment is missing.

  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61000-3-2:2019/A1:2021(Amendment)
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)
EN IEC 61000-3-2:2019/A1:2021

The contents of the Interpretation sheet of August 2021 have been included in this copy. Apply to the English version only.

  • Amendment
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 55014-1:2021(Amendment)
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
EN IEC 55014-1:2021

This part of CISPR 14 specifies the requirements that apply to the emission of radio-frequency
disturbances in the frequency range 9 kHz to 400 GHz from appliances, electric tools and similar
apparatus as defined below, whether powered by AC or DC (including a battery).
This document is applicable to the following equipment:
• household appliances or similar equipment;
NOTE 1 Examples are equipment used:
– for typical housekeeping functions in the household environment, which includes the dwelling and its
associated buildings, the garden, etc.;
– for typical housekeeping functions in shops, offices, commercial and other similar working environments;
– on farms;
– by clients in hotels and other residential type environments;
– for induction cooking or air-conditioning, either in residential or commercial environments.
• electric tools;
NOTE 2 Examples of electric tools include electric motor-operated or electromagnetically driven hand-held tools,
transportable tools, lawn and garden machinery.
• similar apparatus.
NOTE 3 Examples are:
– external power controllers using semiconductor devices;
– motor-driven electro-medical equipment;
– electric/electronic toys;
– personal care and beauty care appliances;
– automatic goods-dispensing machines;
– entertainment machines;
– cine or slide projectors;
– battery chargers and external power supplies for use with products under the scope of this document;
– electric fence energisers.
Also included in the scope of this document are separate parts of the above mentioned
equipment such as motors and switching devices (e.g. power or protective relays). However,
no emission requirements apply to such separate parts, unless otherwise stated in this
document.
Products which incorporate radio transmit/receive functions are included in the scope of this
document.
Equipment under the scope of this document making use of IPT is also in the scope.
SIST EN IEC 55014-1:2021
CISPR 14-1:2020 © IEC 2020 – 11 –
Excluded from the scope of this document are:
– equipment for which all emission requirements in the radio-frequency range are explicitly
formulated in other CISPR standards;
NOTE 4 Examples are:
− luminaires, including portable luminaires for children, discharge lamps and other lighting devices under the
scope of CISPR 15;
− information technology equipment, e.g. home computers, personal computers, electronic copying machines
under the scope of CISPR 32;
− audio/video equipment and electronic music instruments other than toys under the scope of CISPR 32;
− mains communication devices, as well as baby surveillance systems;
− equipment which is under the scope of CISPR 11 (e.g. microwave ovens) but be aware of 6.5 on
multifunction equipment (e.g. for another function requiring click measurements)
− radio controls, walkie-talkies and other types of radio-transmitters;
− arc welding equipment.
– equipment intended to be used only on a vehicle, ship or aircraft;
– equipment used only in industrial environment
– the effects of electromagnetic phenomena relating to the safety of the equipment.
Multifunction equipment may be required to comply with clauses in this and other standards.
The details are given in 6.5.
The emission requirements in this document are not intended to be applicable to the intentional
transmissions from a radio transmitter as defined by the ITU including their spurious emissions.

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day