SIST EN 3155-067:2009

SLOVENSKI STANDARD
01-maj-2009
$HURQDYWLND(OHNWULþQLNRQWDNWL]DXSRUDERYYH]QLKHOHPHQWLKGHO
.RQWDNWLHOHNWULþQLNRDNVLDOQLYHOLNRVWPRãNLWLS']DVSDMNDQMHUD]UHG5
6WDQGDUG]DSURL]YRG
Aerospace series - Electrical contacts used in elements of connection - Part 067:
Contacts, electrical, coaxial, size 08, male, type D, solder, class R - Product standard
/XIWXQG5DXPIDKUW(OHNWULVFKH.RQWDNWH]XU9HUZHQGXQJLQ9HUELQGXQJVHOHPHQWHQ
7HLO(OHNWULVFKHNRD[LDO6WLIWNRQWDNWH*U|ȕH7\S']XP/|WHQ.ODVVH5
3URGXNWQRUP
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
067: Contacts électriques, coaxiaux, taille 08, mâles, type D, à souder, classe R - Norme
de produit
Ta slovenski standard je istoveten z: EN 3155-067:2009
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 3155-067
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2009
ICS 49.060
English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 067: Contacts, electrical, coaxial, size 08,
male, type D, solder, class R - Product standard
Série aérospatiale - Contacts électriques utilisés dans les Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung
organes de connexion - Partie 067: Contacts électriques, in Verbindungselementen - Teil 067: Elektrische koaxial
coaxiaux, taille 08, mâles, type D, à souder, classe R - Stiftkontakte, Größe 08, Typ D, zum Löten, Klasse R -
Norme de produit Produktnorm
This European Standard was approved by CEN on 4 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-067:2009: E
worldwide for CEN national Members.

Contents Page
Foreword .3
Introduction .4
1 Scope .4
2 Normative references .4
3 Terms and definitions .5
4 Required characteristics .5
4.1 Specific characteristics .5
4.2 Dimensions and mass .5
4.3 Marking by colour code .6
4.4 Material, surface treatment .6
4.5 Permissible cables.7
4.6 Stripping of cables and wiring method .7
4.7 Tooling .9
4.8 Tests . 10
4.9 Gauge . 13
5 Designation . 14
6 Marking . 14
7 Technical specification . 14

Foreword
This document (EN 3155-067:2009) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at
the latest by August 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

Introduction
The contact defined by this standard is derived and interchangeable with that of SAE-AS39029/60.
1 Scope
This standard specifies the required characteristics, tests and tooling applicable to male coaxial electrical
contacts, size 08, type D, solder, class R, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-068.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
*
EN 2591- , Aerospace series — Elements of electrical and optical connection — Test methods
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical
specification
EN 3155-002, Aerospace series — Electrical contacts used in elements of connection — Part 002: List and
utilization of contacts
EN 3155-068, Aerospace series — Electrical contacts used in elements of connection — Part 068: Contacts,
electrical, coaxial, size 08, female, type D, solder, class R — Product standard

QQ-S-571, Solder, tin alloy: tin-lead alloy and lead alloy
MIL-I-81969/14, Installing and removal tools, connector electrical contact, type III, class 2, composition B
MIL-PRF-5606, Hydraulic fluid, petroleum base, aircraft, missile and ordnance
MIL-PRF-7808, Lubricating oil, aircraft turbine engine, synthetic base, NATO code number O-148
MIL-PRF-7870, Lubricating oil: general purpose, low temperature
MIL-PRF-23699, Lubricating oil, aircraft turbine engine, synthetic base, NATO code number O-156
MIL-PRF-87937, Cleaning compound aerospace equipment

*
All parts quoted in this document.
1 Published as ASD Prestandard at the date of publication of this standard.
2 Published by:
...