SIST EN 13445-3:2014/A2:2016

SLOVENSKI STANDARD
SIST EN 13445-3:2014/A2:2016
01-november-2016
1HRJUHYDQHWODþQHSRVRGHGHO.RQVWUXLUDQMH'RSROQLOR$
Unfired pressure vessels - Part 3: Design
Unbefeuerte Druckbehälter - Teil 3: Konstruktion
Récipients sous pression non soumis à la flamme - Partie 3 : Conception
Ta slovenski standard je istoveten z: EN 13445-3:2014/A2:2016
ICS:
23.020.32 7ODþQHSRVRGH Pressure vessels
SIST EN 13445-3:2014/A2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13445-3:2014/A2:2016

---------------------- Page: 2 ----------------------

SIST EN 13445-3:2014/A2:2016


EN 13445-3:2014/A2
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2016
EUROPÄISCHE NORM
ICS 23.020.30
English Version

Unfired pressure vessels - Part 3: Design
Récipients sous pression non soumis à la flamme - Unbefeuerte Druckbehälter - Teil 3: Konstruktion
Partie 3 : Conception
This amendment A2 modifies the European Standard EN 13445-3:2014; it was approved by CEN on 12 June 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-3:2014/A2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13445-3:2014/A2:2016
EN 13445-3:2014/A2:2016 (E)
Contents Page
European foreword . 3
1 Modification to Annex M (informative), In service monitoring of vessels operating in
fatigue or creep service . 4

2

---------------------- Page: 4 ----------------------

SIST EN 13445-3:2014/A2:2016
EN 13445-3:2014/A2:2016 (E)
European foreword
This document (EN 13445-3:2014/A2:2016) has been prepared by Technical Committee CEN/TC 54
“Unfired pressure vessels”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2017, and conflicting national standards
shall be withdrawn at the latest by February 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 97/23/EC.
For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of
EN 13445-3:2014.
This document includes the text of the amendment itself. The corrected pages of EN 13445-3 will be
published in July 2017 as Issue 4 of the standard.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 13445-3:2014/A2:2016
EN 13445-3:2014/A2:2016 (E)
1 Modification to Annex M (informative), In service monitoring of vessels
operating in fatigue or creep service
Replace the existing Annex M with the following:
“
Annex M
(informative)

In service monitoring of vessels operating in fatigue or creep service
M.1 Purpose
This annex gives guidance on the monitoring of vessels which operate in either fatigue or creep service.
M.2 Fatigue operation
The operator should record in a suitable fashion the number of load cycles occurring and a plan should
be prepared for the inspection of the vessel throughout its life. Typically, a pressure vessel operating in
fatigue should be internally and if necessary externally inspected (by VT, RT, UT, PT, etc. as relevant).
Surface inspection is generally more relevant than volumetric inspection.
The first inspection should take place after a period corresponding to not more than 50 % of the
calculated allowable fatigue life. The following inspections should take place after a further period of
not more than 50 % (i.e. before 100 % of the calculated allowable fatigue life).
NOTE
...