SIST EN 60204-1:2018/A1:2025

SLOVENSKI STANDARD
01-oktober-2025
Varnost strojev - Električna oprema strojev - 1. del: Splošne zahteve - Dopolnilo
(IEC 60204-1:2016/AMD1:2021)
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
(IEC 60204-1:2016/AMD1:2021)
Sicherheit von Maschinen - Elektrische Ausrüstung von Maschinen - Teil 1: Allgemeine
Anforderungen (IEC 60204-1:2016/AMD1:2021)
Sécurité des machines - Équipement électrique des machines - Partie 1: Exigences
générales (IEC 60204-1:2016/AMD1:2021)
Ta slovenski standard je istoveten z: EN 60204-1:2018/A1:2025
ICS:
13.110 Varnost strojev Safety of machinery
29.020 Elektrotehnika na splošno Electrical engineering in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60204-1:2018/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM April 2025
ICS 13.110; 29.020
English Version
Safety of machinery - Electrical equipment of machines - Part 1:
General requirements
(IEC 60204-1:2016/AMD1:2021)
Sécurité des machines - Équipement électrique des Sicherheit von Maschinen - Elektrische Ausrüstung von
machines - Partie 1: Exigences générales Maschinen - Teil 1: Allgemeine Anforderungen
(IEC 60204-1:2016/AMD1:2021) (IEC 60204-1:2016/AMD1:2021)
This amendment A1 modifies the European Standard EN 60204-1:2018; it was approved by CENELEC on 2024-10-16. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60204-1:2018/A1:2025 E

European foreword
The text of document 44/884/CDV, future edition 6 of IEC 60204-1/AMD1, prepared by TC 44 "Safety
of machinery - Electrotechnical aspects" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60204-1:2018/A1:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-04-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-04-30
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60204-1:2016/AMD1:2021 was approved by CENELEC as
a European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60034-1 NOTE Approved as EN 60034-1
IEC 60204-11:2018 NOTE Approved as EN IEC 60204-11:2019 (not modified)
IEC 60909-0:2016 NOTE Approved as EN 60909-0:2016 (not modified)
IEC 60947-5-2:2019 NOTE Approved as EN IEC 60947-5-2:2020 (not modified) + A11:2022
IEC 61000-6-1:2016 NOTE Approved as EN IEC 61000-6-1:2019 (not modified)
IEC 61000-6-2:2016 NOTE Approved as EN IEC 61000-6-2:2019 (not modified)
IEC 61000-6-4:2018 NOTE Approved as EN IEC 61000-6-4:2019 (not modified)
IEC 61180 NOTE Approved as EN 61180
IEC 61496-1:2020 NOTE Approved as EN IEC 61496-1:2020 (not modified)
IEC 62745 NOTE Approved as EN 62745
IEC 81346-2:2019 NOTE Approved as EN IEC 81346-2:2019 (not modified)
ISO 13851:2019 NOTE Approved as EN ISO 13851:2019 (not modified)
ISO 14118:2017 NOTE Approved as EN ISO 14118:2018 (not modified)
ISO 14119 NOTE Approved as EN ISO 14119
ISO 14122-1:2016 NOTE Approved as EN ISO 14122-1:2016 (not modified)
ISO 14122-2:2016 NOTE Approved as EN ISO 14122-2:2016 (not modified)
ISO 14122-3:2016 NOTE Approved as EN ISO 14122-3:2016 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Delete the following reference:
Publication Year Title EN/HD Year
IEC 60034-1 2010 Rotating electrical machines - EN 60034-1 2010
(mod) Part 1: Rating and performance
+ corr. October 2010
Replace the following references:
Publication Year Title EN/HD Year
IEC 60364-4-41 2005 Low-voltage electrical installations - Part 4- HD 60364-4-41 2017
(mod) 41: Protection for safety - Protection against
electric shock
+ A1 2017 - -
- - + A11 2017
- - + A12 2019
IEC 60364-5-53 2019 Low-voltage electrical installations -- Part 5- - -
53: Selection and erection of electrical
equipment - Protection, isolation, switching,
control and monitoring
Add the following reference:
Publication Year Title EN/HD Year
IEC 60364-6 2016 Low voltage electrical installations - Part 6: HD 60364-6 2016
Verification
- - + A11 2017
- - + A12 2017
Replace the following references:
Publication Year Title EN/HD Year
IEC 60445 2017 Basic and safety principles for man-machine - -
interface, marking and identification -
Identification of equipment terminals,
conductor terminations and conductors
IEC 60947-5-1 2016 Low-voltage switchgear and controlgear - EN 60947-5-1 2017
Part 5-1: Control circuit devices and
switching elements - Electromechanical
control circuit devices
IEC 61558-1 2017 Safety of transformers, reactors, power EN IEC 61558-1 2019
supply units and combinations thereof - Part
1: General requirements and tests
ISO 7010 2019 Graphical symbols - Safety colours and - -
safety signs - Registered safety signs
+ A1 2020 + A1 2020
ISO 13850 2015 Safety of machinery - Emergency stop EN ISO 13850 2015
function - Principles for design

IEC 60204-1 ®
Edition 6.0 2021-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AM ENDMENT 1
AM ENDEMENT 1
Safety of machinery –
Part 1: General requirements
Sécurité des machines –
Partie 1: Exigences générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.110; 29.020 ISBN 978-2-8322-4039-7
– 2 – IEC 60204-1:2016/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SAFETY OF MACHINERY –
Part 1: General requirements
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 60204-1:2016 has been prepared by IEC technical committee 44: Safety
of machinery – Electrotechnical aspects.
The text of this Amendment is based on the following documents:
Draft Report on voting
44/884/CDV 44/913/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Amendment is English.

IEC 60204-1:2016/AMD1:2021 – 3 –
© IEC 2021
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
___________
FOREWORD
Replace the 7th item under the 8th paragraph with:
6.3.3 b): The use of residual current protective devices with a rated residual operating
current which is coordinated with the earth electrode resistance is mandatory in TT
systems as a means for fault protection by automatic disconnection of supply (Italy).

Replace the 8th item under the 8th paragraph with:
7.2.3: Disconnection of the neutral conductor is mandatory in a TN-S system (France).

Add the following new item after the 8th item under the 8th paragraph with:
7.2.3: Disconnection of the neutral conductor is mandatory in TN-systems (Norway).

2 Normative References
Delete the existing reference to IEC 60034-1.
Replace the existing reference to IEC 60364-4-41 with the following new reference:
IEC 60364-4-41:2005, Low-voltage electrical installations – Part 4-41: Protection for safety –
Protection against electric shock
IEC 60364-4-41:2005/AMD1:2017
– 4 – IEC 60204-1:2016/AMD1:2021
© IEC 2021
Replace the existing reference to IEC
...