SIST EN 772-20:2000/A1:2005

SLOVENSKI STANDARD
SIST EN 772-20:2000/A1:2005
01-april-2005
Metode preskušanja zidakov - 20. del: Ugotavljanje ravnosti površin zidakov
Methods of test for masonry units - Part 20: Determination of flatness of faces of
masonry units
Prüfverfahren für Mauersteine - Teil 20: Bestimmung der Ebenheit von Mauersteinen
Méthodes d'essai des éléments de maçonnerie - Partie 20 : Détermination de la planéité
des éléments de maçonnerie
Ta slovenski standard je istoveten z: EN 772-20:2000/A1:2005
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 772-20:2000/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 772-20:2000/A1:2005

---------------------- Page: 2 ----------------------

SIST EN 772-20:2000/A1:2005
EUROPEAN STANDARD
EN 772-20:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2005
ICS 91.100.30
English version
Methods of test for masonry units - Part 20: Determination of
flatness of faces of masonry units
Méthodes d'essai des éléments de maçonnerie - Partie 20 : Prüfverfahren für Mauersteine - Teil 20: Bestimmung der
Détermination de la planéité des éléments de maçonnerie Ebenheit von Mauersteinen aus Beton, Betonwerksteinen
und Natursteinen
This amendment A1 modifies the European Standard EN 772-20:2000; it was approved by CEN on 29 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 772-20:2000/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 772-20:2000/A1:2005
EN 772-20:2000/A1:2005 (E)
Contents
Page
Foreword.3
1 Modification in Title .4
2 Modification in 1 Scope.4
3 Modification in 2 Normative references .4
4 Modification in 4.1 Sampling .4
5 Modification in 5 Procedure.4
6 Modification in 6.1 Calculation of results.4
7 Modification in 6.2 Expression of results.5
8 Modification in 7 Test report.5

2

---------------------- Page: 4 ----------------------

SIST EN 772-20:2000/A1:2005
EN 772-20:2000/A1:2005 (E)
Foreword
This document (EN 772-20:2000/A1:2005)
...