iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 17839:2024

(Main)

Glass in building - Glazing and airborne sound insulation - Validation procedure for calculation tools

Glass in building - Glazing and airborne sound insulation - Validation procedure for calculation tools

This document provides a procedure to validate a calculation tool based on simulation, analytical calculation and/or interpolation of airborne sound insulation characteristics of glass products.

Glas in Bauwesen - Glas und Luftschalldämmung - Validierungsverfahren für Berechnungsprogramme

Dieses Dokument liefert ein Verfahren zur Validierung eines Berechnungstools auf Grundlage von Simulation, analytischer Berechnung und/oder Interpolation von Merkmalen der Luftschalldämmung von Glas¬erzeugnissen.

Verre dans la construction - Vitrages et isolation acoustique - Procédure de validation des outils de calcul

Le présent document fournit une procédure permettant de valider un outil de calcul basé sur une simulation, un calcul analytique et/ou une interpolation des caractéristiques d’isolation aux bruits aériens des produits verriers.

Steklo v gradbeništvu - Zasteklitev in zvočna izolacija - Postopek potrjevanja računskih orodij

Ta dokument podaja postopek potrjevanja računskega orodja na podlagi simulacije, analitičnega računa in/ali interpolacije ocene zvočne izolacije za steklene proizvode.

General Information

Status
Published
Public Enquiry End Date
29-Jun-2022
Publication Date
12-Feb-2024
ICS
81.040.20 - Glass in building
91.120.20 - Acoustics in building. Sound insulation
Technical Committee
STV - Steklo, svetloba in razsvetljava v gradbeništvu
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
15-Nov-2023
Due Date
20-Jan-2024
Completion Date
13-Feb-2024
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
Ref Project
EN 17839:2023 - Glass in building - Glazing and airborne sound insulation - Validation procedure for calculation tools

Buy Standard

EN 17839:2024EN 17839:2024
PreviousNext
Standard
EN 17839:2024
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17839:2024
01-marec-2024
Steklo v gradbeništvu - Zasteklitev in zvočna izolacija - Postopek potrjevanja
računskih orodij
Glass in building - Glazing and airborne sound insulation - Validation procedure for
calculation tools
Glas in Bauwesen - Glas und Luftschalldämmung - Validierungsverfahren für
Berechnungsprogramme
Verre dans la construction - Vitrages et isolation acoustique - Procédure de validation
des outils de calcul
Ta slovenski standard je istoveten z: EN 17839:2023
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
91.120.20 Akustika v stavbah. Zvočna Acoustics in building. Sound
izolacija insulation
SIST EN 17839:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17839:2024

---------------------- Page: 2 ----------------------
SIST EN 17839:2024


EN 17839
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2023
EUROPÄISCHE NORM
ICS 81.040.20; 91.120.20
English Version

Glass in building - Glazing and airborne sound insulation -
Validation procedure for calculation tools
Verre dans la construction - Vitrages et isolation Glas im Bauwesen - Glas und Luftschalldämmung -
acoustique - Procédure de validation des outils de Validierungsverfahren für Berechnungsprogramme
calcul
This European Standard was approved by CEN on 14 August 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17839:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17839:2024
EN 17839:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Software validation procedure . 6
4.1 General outline. 6
4.2 Coverage of the validation . 6
4.3 Requirements for the calculation tool . 7
4.4 Step 1: validation using the reference values of Table A.1. 7
4.4.1 Reference data. 7
4.4.2 Comparison procedure . 7
4.4.3 Validation criteria .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12758:2019+A1:2023(Main + Amendment)
Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
EN 12758:2019+A1:2023

This European Standard assigns sound insulation values to all transparent, translucent and opaque glass products, described in the European Standards for basic, special basic or processed glass products, when intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.
This document outlines the procedure, by which glass products may be rated, according to their acoustic performance which enables assessment of compliance with the acoustic requirements of buildings.
Rigorous technical analysis of measurement data remains an option, but this standard is intended to enable the derivation of simpler indices of performance, which can be adopted with confidence by non-specialists.
By adopting the principles of this standard the formulation of acoustic requirements in Building Codes and for product specification to satisfy particular needs for glazing is simplified.
It is recognised that the acoustic test procedures contained within EN ISO 140-1 and EN ISO 140-3 relate only to glass panes and their combinations. Although the same principles should be followed as closely as possible, it is inevitable that some compromises are necessary, because of the bulkier construction of other glazing types, e.g. glass blocks, paver units, channel-shaped glass, structural glazing and structural sealant glazing. Guidelines on how to adapt the test procedures for these glazing types are offered in Clause 4.
All the considerations of this standard relate to panes of glass/glazing alone. Incorporation of them into windows may cause changes in acoustic performance as a result of other influences, e.g. frame design, frame material, glazing material/method, mounting method, air tightness, etc. Measurements of the sound insulation of complete windows (glass and frame) may be undertaken to resolve such issues.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12758:2019/kprA1:2023(Amendment)
Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
EN 12758:2019/FprA1

This European Standard assigns sound insulation values to all transparent, translucent and opaque glass products, described in the European Standards for basic, special basic or processed glass products, when intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.
This document outlines the procedure, by which glass products may be rated, according to their acoustic performance which enables assessment of compliance with the acoustic requirements of buildings.
Rigorous technical analysis of measurement data remains an option, but this standard is intended to enable the derivation of simpler indices of performance, which can be adopted with confidence by non-specialists.
By adopting the principles of this standard the formulation of acoustic requirements in Building Codes and for product specification to satisfy particular needs for glazing is simplified.
It is recognised that the acoustic test procedures contained within EN ISO 140-1 and EN ISO 140-3 relate only to glass panes and their combinations. Although the same principles should be followed as closely as possible, it is inevitable that some compromises are necessary, because of the bulkier construction of other glazing types, e.g. glass blocks, paver units, channel-shaped glass, structural glazing and structural sealant glazing. Guidelines on how to adapt the test procedures for these glazing types are offered in Clause 4.
All the considerations of this standard relate to panes of glass/glazing alone. Incorporation of them into windows may cause changes in acoustic performance as a result of other influences, e.g. frame design, frame material, glazing material/method, mounting method, air tightness, etc. Measurements of the sound insulation of complete windows (glass and frame) may be undertaken to resolve such issues.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12758:2019+A1:2023(Main + Amendment)
Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
EN 12758:2019+A1:2023

This European Standard assigns sound insulation values to all transparent, translucent and opaque glass products, described in the European Standards for basic, special basic or processed glass products, when intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.
This document outlines the procedure, by which glass products may be rated, according to their acoustic performance which enables assessment of compliance with the acoustic requirements of buildings.
Rigorous technical analysis of measurement data remains an option, but this standard is intended to enable the derivation of simpler indices of performance, which can be adopted with confidence by non-specialists.
By adopting the principles of this standard the formulation of acoustic requirements in Building Codes and for product specification to satisfy particular needs for glazing is simplified.
It is recognised that the acoustic test procedures contained within EN ISO 140-1 and EN ISO 140-3 relate only to glass panes and their combinations. Although the same principles should be followed as closely as possible, it is inevitable that some compromises are necessary, because of the bulkier construction of other glazing types, e.g. glass blocks, paver units, channel-shaped glass, structural glazing and structural sealant glazing. Guidelines on how to adapt the test procedures for these glazing types are offered in Clause 4.
All the considerations of this standard relate to panes of glass/glazing alone. Incorporation of them into windows may cause changes in acoustic performance as a result of other influences, e.g. frame design, frame material, glazing material/method, mounting method, air tightness, etc. Measurements of the sound insulation of complete windows (glass and frame) may be undertaken to resolve such issues.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12758:2019/kprA1:2023(Amendment)
Glass in building - Glazing and airborne sound insulation - Product descriptions, determination of properties and extension rules
EN 12758:2019/FprA1

This European Standard assigns sound insulation values to all transparent, translucent and opaque glass products, described in the European Standards for basic, special basic or processed glass products, when intended to be used in glazed assemblies in buildings, and which exhibit properties of acoustic protection, either as a prime intention or as a supplementary characteristic.
This document outlines the procedure, by which glass products may be rated, according to their acoustic performance which enables assessment of compliance with the acoustic requirements of buildings.
Rigorous technical analysis of measurement data remains an option, but this standard is intended to enable the derivation of simpler indices of performance, which can be adopted with confidence by non-specialists.
By adopting the principles of this standard the formulation of acoustic requirements in Building Codes and for product specification to satisfy particular needs for glazing is simplified.
It is recognised that the acoustic test procedures contained within EN ISO 140-1 and EN ISO 140-3 relate only to glass panes and their combinations. Although the same principles should be followed as closely as possible, it is inevitable that some compromises are necessary, because of the bulkier construction of other glazing types, e.g. glass blocks, paver units, channel-shaped glass, structural glazing and structural sealant glazing. Guidelines on how to adapt the test procedures for these glazing types are offered in Clause 4.
All the considerations of this standard relate to panes of glass/glazing alone. Incorporation of them into windows may cause changes in acoustic performance as a result of other influences, e.g. frame design, frame material, glazing material/method, mounting method, air tightness, etc. Measurements of the sound insulation of complete windows (glass and frame) may be undertaken to resolve such issues.

  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 45545-3:2024(Main)
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
EN 45545-3:2024

This part of EN 45545 specifies the fire resistance requirements and testing methods for fire barriers for railway vehicles.
The objective of the measures and requirements, specified in this part of EN 45545, is to protect passengers and staff in railway vehicles in the event of a developing fire on board.
Use of a Fire Containment and Control System, where permitted as an alternative to a fire barrier, is not in the scope of this part of EN 45545. It is not within the scope of this part of EN 45545 to describe measures that ensure the preservation of the railway vehicles in the event of a fire.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-V CEN/CLC Guide 25:2024(Main)
The concept of Cooperation with European Organizations and other stakeholders
CEN/CLC Guide 25:2024
  • Guide
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST HD 60364-7-716:2024(Main)
Low-voltage electrical installations - Part 7-716: Requirements for special installations or locations - ELV DC power distribution over information and communications technology (ICT) cable infrastructure (IEC 60364-7-716:2023)
HD 60364-7-716:2023

IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3.
Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power.
The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3.
This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).

  • Standardization document
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61970-302:2024(Main)
Energy management system application program interface (EMS-API) - Part 302: Common information model (CIM) dynamics (IEC 61970-302:2024)
EN IEC 61970-302:2024

IEC 61970-302:2024 specifies a Dynamics package which contains part of the CIM to support the exchange of models between software applications that perform analysis of the steady-state stability (small-signal stability) or transient stability of a power system as defined by IEEE / CIGRE, Definition and classification of power system stability IEEE/CIGRE joint task force on stability terms and definitions.
The model descriptions in this document provide specifications for each type of dynamic model as well as the information that needs to be included in dynamic case exchanges between planning/study applications.
The scope of the CIM Dynamics package specified in this document includes:
• standard models: a simplified approach to describing dynamic models, where models representing dynamic behaviour of elements of the power system are contained in predefined libraries of classes which are interconnected in a standard manner. Only the names of the selected elements of the models along with their attributes are needed to describe dynamic behaviour.
• proprietary user-defined models: an approach providing users the ability to define the parameters of a dynamic behaviour model representing a vendor or user proprietary device where an explicit description of the model is not provided by this document. The same libraries and standard interconnections are used for both proprietary user-defined models and standard models. The behavioural details of the model are not documented in this document, only the model parameters.
• A model to enable exchange of models’ descriptions. This approach can be used to describe user defined and standard models.
• A model to enable exchange of simulation results.
This second edition cancels and replaces the first edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The majority of issues detected in IEC 61970-302:2018 are addressed;
b) IEEE 421.5-2016 on Excitation systems is fully covered;
c) The IEEE turbine report from 2013 was considered and as a result a number of gas, steam and hydro turbines/governors are added;
d) IEC 61400-27-1:2020 on wind turbines is fully incorporated;
e) WECC Inverter-Based Resource (IBR) models, Hybrid STATCOM models and storage models are added;
f) The user defined models are enhanced with a model which enables modelling of detailed dynamic model;
g) A model to enable exchange of simulation results is added;
h) The work on the HVDC models is not complete. The HVDC dynamics models are a complex domain in which there are no models that are approved or widely recognised on international level, i.e. there are only project-based models. At this stage IEC 61970-302:2022 only specifies some general classes. However, it is recognised that better coverage of HVDC will require a further edition of this document;
i) Models from IEEE 1547-2018 "IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces" are added.
j) Statements have been added to certain figures, tables, schemas, and enumerations throughout the document that indicate that they are reproduced with the permission of the UCA International User Group (UCAIug). These items are derived from the CIM.

  • Standard
    894 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60794-2-23:2024(Main)
Optical fibre cables - Part 2-23: Indoor cables - Detail specification for multi-fibre cables for use in MPO connector terminated cable assemblies (IEC 60794-2-23:2024)
EN IEC 60794-2-23:2024

IEC 60794-2-23: 2024 is a detail specification and specifies indoor multi-fibre cables for use in MPO (multi-fibre push on) connector terminated cable assemblies.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60794-1-311:2024(Main)
Optical fibre cables - Part 1-311: Generic specification - Basic optical cable test procedures - Cable element test methods - Tensile strength and elongation test for cable elements, Method G11A (IEC 60794-1-311:2024)
EN IEC 60794-1-311:2024

IEC 60794-1-311:2024 describes test procedures to be used in establishing uniform requirements of optical fibre cable elements for the mechanical property – tensile strength and elongation at break. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc.
This document partially cancels and replaces IEC 60794-1-23:2019. This edition includes the following significant technical changes with respect to IEC 60794‑1‑23:2019:
a) The information about dumb-bells is removed because this is not used for testing cable elements;
b) the parameters strain at yield and E modulus are added in 5.7.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day