SIST EN ISO 22042:2021/A1:2024

SLOVENSKI STANDARD
01-julij-2024
Hladilniki in zamrzovalne omare za poklicno uporabo - Razvrstitev, zahteve in
preskusni pogoji - Dopolnilo A1 (ISO 22042:2021/Amd 1:2024)
Blast chiller and freezer cabinets for professional use - Classification, requirements and
test conditions - Amendment 1 (ISO 22042:2021/Amd 1:2024)
Schnellkühl- und Schockfrostkabinen für den gewerblichen Gebrauch - Klassifizierung,
Anforderungen und Prüfbedingungen - Änderung 1 (ISO 22042:2021/Amd 1:2024)
Cellules de refroidissement et de surgélation rapide pour usage professionnel -
Classification, exigences et conditions d'essai - Amendement 1 (ISO 22042:2021/Amd
1:2024)
Ta slovenski standard je istoveten z: EN ISO 22042:2021/A1:2024
ICS:
97.130.20 Hladilne naprave za trgovine Commercial refrigerating
appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 22042:2021/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 97.130.20
English Version
Blast chiller and freezer cabinets for professional use -
Classification, requirements and test conditions -
Amendment 1 (ISO 22042:2021/Amd 1:2024)
Cellules de refroidissement et de surgélation rapide Schnellkühl- und Schockfrostkabinen für den
pour usage professionnel - Classification, exigences et gewerblichen Gebrauch - Klassifizierung,
conditions d'essai - Amendement 1 (ISO Anforderungen und Prüfbedingungen - Änderung 1
22042:2021/Amd 1:2024) (ISO 22042:2021/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 22042:2021; it was approved by CEN on 24 February 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22042:2021/A1:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the ecodesign
th
requirements of Commission Regulation (EU) No 2015/1095 (OJEU L 177/ 19 8 July
2015) aimed to be covered . 4

European foreword
This document (EN ISO 22042:2021/A1:2024) has been prepared by Technical Committee ISO/TC 86
"Refrigeration and air-conditioning" in collaboration with Technical Committee CEN/TC 44
“Commercial and Professional Refrigerating Appliances and Systems, Performance and Energy
Consumption” the secretariat of which is held by UNI.
This Amendment to the European Standard EN ISO 22042:2021 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2024,
and conflicting national standards shall be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 22042:2021/Amd 1:2024 has been approved by CEN as EN ISO 22042:2021/A1:2024
without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the ecodesign
requirements of Commission Regulation (EU) No 2015/1095 (OJEU L 177/
th
19 8 July 2015) aimed to be covered
This European Standard has been prepared under a Commission’s standardization request M/495 EN
and Amendment No. 1 to M/495 Technical Update (ANNEX B OF M/495) to provide one voluntary
means of conforming to the ecodesign requirements of Commission Regulation (EU) No 2015/1095 of
5 May 2015 implementing Directive 2009/125/EC of the European Parliament and of the Council with
regard to ecodesign requirements for professional refrigerated storage cabinets, blast cabinets,
th
condensing units and process chillers OJEU L 177/19 8 July 2015.
Once this standard is cited in the Official Journal of the European Union under that Regulation,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding ecodesign
requirements of that Regulation and associated EFTA regulations.
Table ZA.1 Correspondence between this European Standard and Commission Regulation (EU)
No 2015/1095 of 5 May 201
...