SIST EN 3660-003:2023
(Main)Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A - Product standard
Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 003: Grommet nut, style A - Product standard
This document defines a range of grommet nuts, style A, for use under the following conditions:
Associated electrical connector(s): EN 3660-002
Temperature range, Class N: -65 °C to 200 °C
Class W: -65 °C to 175 °C
Class K: -65 °C to 260 °C
Class A: -65 °C to 200 °C
Class T: -65 °C to 175 °C
Class Z: -65 °C to 175 °C
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 003: Dichtungsmutter, Bauform A - Produktnorm
No Scope available
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 003 : Écrou de passe-fil, type A - Norme de produi
Le présent document définit une gamme d'écrous de passe-fil, de type A, destinés à être utilisés dans les conditions ci-après :
Connecteur(s) électrique(s) associé(s) : EN 3660-002
Plage de températures, Classe N : -65 °C à 200 °C
Classe W : -65 °C à 175 °C
Classe K : -65 °C à 260 °C
Classe A : -65 °C à 200 °C
Classe T : -65 °C à 175 °C
Classe Z : -65 °C à 175 °C
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 003. del: Tesnilna matica, tip A - Standard za proizvod
Ta dokument določa različne vrste tesnilnih matic, tipa A, za uporabo pod naslednjimi pogoji:
Povezani električni konektorji: EN 3660-002
Temperaturno območje, razred N: od –65 °C do 200 °C
razred W: od –65 °C do 175 °C
razred K: od –65 °C do 260 °C
razred A: od –65 °C do 200 °C
razred T: od –65 °C do 175 °C
razred Z: od –65 °C do 175 °C
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 3660-003:2023
01-december-2023
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -
003. del: Tesnilna matica, tip A - Standard za proizvod
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 003: Grommet nut, style A - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 003: Dichtungsmutter, Bauform A - Produktnorm
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 003 : Écrou de passe-fil, type A - Norme de produi
Ta slovenski standard je istoveten z: EN 3660-003:2023
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
SIST EN 3660-003:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 3660-003:2023
---------------------- Page: 2 ----------------------
SIST EN 3660-003:2023
EN 3660-003
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2023
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3660-003:2018
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 003:
Grommet nut, style A - Product standard
Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und
connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 003:
optiques - Partie 003 : Écrou de passe-fil, type A - Dichtungsmutter, Bauform A - Produktnorm
Norme de produit
This European Standard was approved by CEN on 9 July 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3660-003:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 3660-003:2023
EN 3660-003:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Characteristics . 4
4.1 Dimensions and mass . 4
4.2 Interface dimensions . 6
4.2.1 Associated connection. 6
4.2.2 Front interface . 6
4.3 Material and finish .
...
SLOVENSKI STANDARD
oSIST prEN 3660-003:2020
01-september-2020
Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje -
003. del: Tesnilna matica, tip A - Standard za proizvod
Aerospace series - Cable outlet accessories for circular and rectangular electrical and
optical connectors - Part 003: Grommet nut, style A - Product standard
Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und
Rechtecksteckverbinder - Teil 003: Dichtungsmutter, Bauform A - Produktnorm
Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires
électriques et optiques - Partie 003 : Écrou de passe-fil, type A - Norme de produit
Ta slovenski standard je istoveten z: prEN 3660-003
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3660-003:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 3660-003:2020
---------------------- Page: 2 ----------------------
oSIST prEN 3660-003:2020
DRAFT
EUROPEAN STANDARD
prEN 3660-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2020
ICS 49.060 Will supersede EN 3660-003:2018
English Version
Aerospace series - Cable outlet accessories for circular and
rectangular electrical and optical connectors - Part 003:
Grommet nut, style A - Product standard
Série aérospatiale - Accessoires arrière pour Luft- und Raumfahrt - Endgehäuse für elektrische und
connecteurs circulaires et rectangulaires électriques et optische Rund- und Rechtecksteckverbinder - Teil 003:
optiques - Partie 003 : Écrou serre-fils, type A - Norme Dichtungsmutter, Bauform A - Produktnorm
de produit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3660-003:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 3660-003:2020
prEN 3660-003:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Characteristics . 4
4.1 Dimensions and mass . 4
4.2 Interface dimensions . 6
4.2.1 Associated connection .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.