SIST EN 50632-2-14:2016/A1:2021
(Amendment)Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers
Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers
This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected.
This part of EN 50632 sets particular requirements for planers.
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-14: Besondere Anforderungen für Hobel
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-14: Exigences particulières pour les raboteuses
No scope available
Elektromotorna orodja - Postopek meritve prahu - 2-14. del: Posebne zahteve za poravnalne skobeljnike - Dopolnilo A1
General Information
Relations
Overview
EN 50632-2-14:2016/A1:2021 is a CLC (CENELEC) amendment to the European standard for dust measurement procedures on electric motor-operated tools, specifically addressing planers. It applies to mains- or battery-powered planers, with or without dust extraction, where airborne particulate such as wood dust or mineral dust containing silica is expected. This amendment (A1:2021) updates the 2016 Part 2-14 requirements with clarifications from practical tests and adds a test orientation figure (Figure 101).
Key topics and requirements
- Scope: Dust measurement for electric motor-operated tools (planers) - applies regardless of dust extraction unit presence.
- Test material and setup:
- Workpiece: Beech, length = (400 ± 2) mm; width a = planing width minus (15 ± 2) mm; moisture ≤ 12% at test start.
- Workpiece mounted horizontally with specified vertical distance to dust sampler intake openings (see Clause 4.2).
- Operating conditions (Table 101 updates):
- Cutting depth: 0.5 mm or maximum cutting depth if < 0.5 mm.
- New blades at the start of each of the three tests.
- Feed force: sufficient to ensure stable operation and good performance.
- Test cycle: 80 planing operations distributed over the working time (example: 80 ops in 10 minutes → 4.0 m/min working speed).
- Operator position and orientation defined by Figure 101 (right-handed setup; mirror for left-handed tools).
- Amendment highlights: references to EN 50632-1:2015 required; replaces Table 101; adds Figure 101 for test orientation.
Practical applications
This standard is practical for:
- Tool manufacturers: to design and validate planers for reduced dust emissions and compliance testing.
- Test laboratories: to perform repeatable, standardized dust emission measurements for planers.
- Occupational health and safety professionals: to assess exposure risk from wood dust or silica during planing tasks and to recommend controls or PPE.
- Regulatory bodies and conformity assessors: to evaluate compliance with European dust measurement expectations for power planers.
- Product development and R&D teams: to compare the effectiveness of dust extraction systems and tool design changes.
Related standards
- EN 50632-1:2015 - Part 1 must be used in conjunction with this document (general dust measurement procedures for electric motor-operated tools).
- EN 50632-2-14:2016 - original Part 2-14 (this document is the 2016 standard as amended by A1:2021).
Keywords: EN 50632-2-14, dust measurement procedure, electric motor-operated tools, planers, wood dust, silica, CLC, operating conditions, dust samplers, Figure 101.
Frequently Asked Questions
SIST EN 50632-2-14:2016/A1:2021 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular requirements for planers". This standard covers: This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected. This part of EN 50632 sets particular requirements for planers.
This European Standard specifies general requirements for the dust measurement of electric motor-operated tools supplied from mains or from batteries. This European Standard applies to those tools with and without dust extraction unit where dust such as mineral dust containing silica or wood dust is expected. This part of EN 50632 sets particular requirements for planers.
SIST EN 50632-2-14:2016/A1:2021 is classified under the following ICS (International Classification for Standards) categories: 13.040.40 - Stationary source emissions; 25.100.25 - Tools for planing and broaching machines; 25.140.20 - Electric tools. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 50632-2-14:2016/A1:2021 has the following relationships with other standards: It is inter standard links to SIST EN 50632-2-14:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 50632-2-14:2016/A1:2021 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2021
Elektromotorna orodja - Postopek meritve prahu - 2-14. del: Posebne zahteve za
poravnalne skobeljnike - Dopolnilo A1
Electric motor-operated tools - Dust measurement procedure - Part 2-14: Particular
requirements for planers
Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-14: Besondere
Anforderungen für Hobel
Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-14:
Exigences particulières pour les raboteuses
Ta slovenski standard je istoveten z: EN 50632-2-14:2016/A1:2021
ICS:
25.100.25 Orodja za glajenje in Tools for planing and
ravnalna orodja broaching machines
25.140.20 Električna orodja Electric tools
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50632-2-14:2016/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2021
ICS 13.040.40; 25.140.20
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-14: Particular requirements for planers
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2-14: Exigences particulières pour les Teil 2-14: Besondere Anforderungen für Hobel
raboteuses
This amendment A1 modifies the European Standard EN 50632-2-14:2016; it was approved by CENELEC on 2021-08-09. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50632-2-14:2016/A1:2021 E
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Modification to 4.3, “Operating
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...