SIST EN 12629-5-3:2004/kFprA1:2010
(Amendment)Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-3: Maschinen zum Vorspannen von Rohren
Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-3: Machines pour la précontrainte des tuyaux
Stroji za izdelavo gradbenih proizvodov iz betona in apnenega peščenca - Varnost - 5-3. del: Stroji za izdelavo cevi iz prednapetega betona
General Information
- Status
- Not Published
- Public Enquiry End Date
- 04-May-2010
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 08-Oct-2019
- Due Date
- 13-Oct-2019
- Completion Date
- 08-Oct-2019
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 10-Jul-2010
- Effective Date
- 01-Apr-2010
Overview
SIST EN 12629-5-3:2004/kFprA1:2010 is a European standard developed by CEN Technical Committee CEN/TC 151 focused on the safety requirements for pipe prestressing machines used in the manufacture of constructional products from concrete and calcium-silicate. This standard serves as a Type C-standard supplementing the general safety provisions of EN 12629-1:2000+A1:2010, specifically addressing the unique hazards and protective measures for pipe prestressing machines. It ensures the machinery complies with EU safety directives, including 98/37/EC and 2006/42/EC, promoting safe design, operation, and risk reduction in industrial environments.
Key Topics
Scope and Application
- Applies to pipe prestressing machines used in the concrete and calcium-silicate construction products industry.
- Supplements the general safety requirements in EN 12629-1 and specifies additional or deviating requirements particular to pipe prestressing.
- Covers foreseeable misuse and significant hazards inherent to these machines.
Safety Requirements and Protective Measures
- Defines risk assessment principles based on EN ISO 12100.
- Emphasizes compliance with safety principles for elimination or reduction of hazards.
- Requires manufacturers to consider site-specific risk reduction means as part of risk assessment.
- Refers to integration with standards like EN ISO 13850 (safety stop), EN ISO 13857 (safeguarding heights), EN 60204-1 (electrical safety), and EN ISO 7731 (auditory danger signals).
Verification and Compliance
- Specifies verification procedures aligned with EN 12629-1:2000+A1.
- Mandates safety instructions, proper marking, and information for use to ensure user awareness and correct machine operation.
Hazard Zones and Risk Identification
- Details identification and documentation of hazard zones linked to machine components and operations.
- Supports safe operator interaction and maintenance activities by clear hazard mapping.
Relationship with EU Directives
- Conforms to essential health and safety requirements of EU Directives 98/37/EC and 2006/42/EC.
- Ensures presumption of conformity for manufacturers following this standard within the EU and EFTA member countries.
Applications
SIST EN 12629-5-3:2004/kFprA1:2010 is critical for manufacturers, machine designers, safety engineers, and end-users involved in:
- Production of prestressed concrete pipes used in infrastructure such as water supply, sewage, gas pipelines, and drainage systems.
- Ensuring workplace safety compliance in factories that operate specialized machinery for pipe prestressing.
- Risk management and safety auditing of construction equipment manufacturing processes.
- Integrating safety features into new or retrofitted pipe prestressing machinery to meet European regulatory requirements.
This standard supports increased operational safety, prevents accidents, and reduces liability by defining clear technical and procedural safety frameworks.
Related Standards
- EN 12629-1:2000+A1:2010 – Common safety requirements for machines manufacturing constructional products.
- EN ISO 12100 (Parts 1 & 2) – Fundamental principles of machine safety and risk assessment.
- EN ISO 13850 – Safety of machinery – Emergency stop function.
- EN ISO 13857 – Safety distances for hazard zones with respect to machinery.
- EN 60204-1 – Safety of machinery – Electrical equipment requirements.
- EN ISO 7731 – Auditory danger signals in industrial environments.
Implementing EN 12629-5-3 alongside these standards ensures comprehensive safety coverage tailored for pipe prestressing machines, optimizing industrial safety management and regulatory compliance.
By adhering to SIST EN 12629-5-3:2004/kFprA1:2010, organizations can assure safer manufacturing environments for concrete and calcium-silicate construction products, ultimately enhancing productivity, reducing accidents, and aligning with European machinery safety legislation.
Frequently Asked Questions
SIST EN 12629-5-3:2004/kFprA1:2010 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines". This standard covers: Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing machines
SIST EN 12629-5-3:2004/kFprA1:2010 is classified under the following ICS (International Classification for Standards) categories: 91.220 - Construction equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 12629-5-3:2004/kFprA1:2010 has the following relationships with other standards: It is inter standard links to SIST EN 12629-5-3:2004+A1:2010, SIST EN 12629-5-3:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 12629-5-3:2004/kFprA1:2010 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC, 98/37/EC; Standardization Mandates: M/079, M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 12629-5-3:2004/kFprA1:2010 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2010
6WURML]DL]GHODYRJUDGEHQLKSURL]YRGRYL]EHWRQDLQDSQHQHJDSHãþHQFD9DUQRVW
GHO 6WURML]DL]GHODYRFHYLL]SUHGQDSHWHJDEHWRQD
Machines for the manufacture of constructional products from concrete and calcium-
silicate - Safety - Part 5-3: Pipe prestressing machines
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen -
Sicherheit - Teil 5-3: Maschinen zum Vorspannen von Rohren
Machines pour la fabrication de produits de construction en béton et silico-calcaire -
Sécurité - Partie 5-3: Machines pour la précontrainte des tuyaux
Ta slovenski standard je istoveten z: EN 12629-5-3:2003/FprA1
ICS:
91.220 Gradbena oprema Construction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 12629-5-3:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
February 2010
ICS 91.220
English Version
Machines for the manufacture of constructional products from
concrete and calcium-silicate - Safety - Part 5-3: Pipe
prestressing machines
Machines pour la fabrication de produits de construction en Maschinen für die Herstellung von Bauprodukten aus Beton
béton et silico-calcaire - Sécurité - Partie 5-3: Machines und Kalksandsteinmassen - Sicherheit - Teil 5-3:
pour la précontrainte des tuyaux Maschinen zum Vorspannen von Rohren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 12629-5-3:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12629-5-3:2003/FprA1:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modifications to the Foreword .4
2 Modifications to the Introduction .5
3 Modifications to Clause 1 (Scope) .5
4 Modifications to Clause 2 (Normative references) .6
5 Modifications to Clause 3 (Terms and definitions) .6
6 Modifications to Clause 4 (List of significant hazards) .6
7 Modifications to Clause 5 (Safety requirements and/or measures) .6
8 Modifications to Clause 6 (Verification of safety requirements and/or measures) .7
9 Modification to Clause 7 (Information for use) .7
10 Modification to Clause 8 (Marking) .8
11 Modifications to Annex B (Hazard zones) .8
12 Modification to Annex ZA, Relationship between this European Standard and the
Essential Requirements of EU Directive 98/37/EC .8
13 Addition of a new Annex ZB, Relationship between this European Standard and the
Essential Requirements of EU Directive 2006/42/EC .9
14 Deletion of the Bibliography .9
Foreword
This document (EN 12629-5-3:2003/FprA1:2010) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines - Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
1 Modifications to the Foreword
th
Replace the 4 paragraph with the following:
"For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document."
th
Replace the 5 paragraph with the following:
"The series "Machines for the manufacture of constructional products from concrete and calcium – silicate –
Safety" consists of following parts:
Part 1: Common requirements
Part 2: Block making machines
Part 3: Slide and turntable machines
Part 4: Concrete rooftile making machines
Part 5.1: Concrete pipe machines manufacturing in the vertical axis.
Part 5.2: Concrete pipe machines manufacturing in the horizontal axis
Part 5.3: Pipe prestressing machines
Part 5.4: Concrete pipe coating machines
Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
Part 7: Stationary and mobile equipment for the benched manufacture of prestressed products
Part 8: Machines and equipment for the manufacture of constructional products from calcium silicate (and
concrete)."
Delete the last but one paragraph.
2 Modifications to the Introduction
Replace the existing text with the following:
"This European Standard is a Type C-standard as stated in EN ISO 12100.
The machinery concerned and the extent to which hazards, hazardous situation and events are covered are
indicated in the scope of this document.
When provisions of this type C document are different from those, which are stated in type A or B documents,
the provisions of this type C document take precedence over the provisions of the other documents, for
machines that have been designed and built according to the provisions of this type C document.
This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010
specific for the pipe prestressing machines as defined in Clause 3.
With the aim of clar
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...