oSIST prEN 14570:2022

SLOVENSKI STANDARD
oSIST prEN 14570:2022
01-april-2022
Oprema in pribor za utekočinjeni naftni plin (UNP) - Oprema za nadzemne in
podzemne posode za UNP
LPG equipment and accessories - Equipping of overground and underground LPG
vessels
Flüssiggas-Geräte und Ausrüstungsteile ¿ Ausrüstung von oberirdisch und unterirdisch
aufgestellten Behältern für Flüssiggas (LPG)
Équipements et accessoires GPL - Équipement des réservoirs sous pression GPL
aériens et enterrés
Ta slovenski standard je istoveten z: prEN 14570
ICS:
23.020.10 Nepremične posode in Stationary containers and
rezervoarji tanks
oSIST prEN 14570:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14570:2022

---------------------- Page: 2 ----------------------
oSIST prEN 14570:2022


DRAFT
EUROPEAN STANDARD
prEN 14570
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2022
ICS 23.020.35 Will supersede EN 14570:2014
English Version

LPG equipment and accessories - Equipping of overground
and underground LPG vessels
Équipements et accessoires GPL - Équipement des Flüssiggas-Geräte und Ausrüstungsteile ¿ Ausrüstung
réservoirs sous pression GPL aériens et enterrés von oberirdisch und unterirdisch aufgestellten
Behältern für Flüssiggas (LPG)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 286.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14570:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14570:2022
prEN 14570:2022 (E)
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviations . 7
3.1 Terms and definitions . 7
3.2 Abbreviations . 9
4 Pressure vessel equipment . 9
4.1 General. 9
4.2 Selection of pressure vessel equipment . 10
4.3 Screwed joints . 10
4.4 Seals and
...