SIST EN 12629-5-1:2004/kFprA1:2010
(Amendment)Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-1: Beton-Rohrmaschinen mit Fertigung in vertikaler Lage
Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-1: Machines pour la fabrication de tuyaux dans l'axe vertical
Stroji za izdelavo gradbenih proizvodov iz betona in apnenega peščenca - Varnost - 5-1. del: Stroji za izdelavo cevi po navpični osi
General Information
- Status
- Not Published
- Public Enquiry End Date
- 04-May-2010
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 08-Oct-2019
- Due Date
- 13-Oct-2019
- Completion Date
- 08-Oct-2019
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 10-Jul-2010
- Effective Date
- 01-Apr-2010
Overview
EN 12629-5-1:2003/FprA1 is a CEN Type C safety standard (draft amendment A1) that defines additional safety requirements specific to pipe making machines manufacturing in the vertical axis. It is part of the EN 12629 series for machines that manufacture constructional products from concrete and calcium‑silicate. This amendment updates scope, normative references, clauses on hazards, safety requirements, verification, user information and marking, and adds informative relationship annexes to EU machinery directives.
Key topics and requirements
- Scope and application: Applies, together with EN 12629-1:2000+A1, to vertical-axis machines for producing concrete pipes, manholes and similar elements. Covers hazards occurring in normal use and reasonably foreseeable misuse.
- Type C standard status: Declared a Type C standard under EN ISO 12100 - specific requirements for a family of machinery that take precedence over Type A/B standards where applicable.
- Risk assessment principles: Requires application of EN ISO 12100 risk assessment methodology and refers to EN 1050 for risk assessment principles.
- Safety requirements / protective measures: Specifies additional protective measures and design principles to reduce significant hazards relevant to vertical pipe-making machines. Emphasizes manufacturer responsibility to address hazards not fully covered by this document.
- Verification and testing: Contains clauses for verification of safety requirements/protective measures and references EN 12629-1:2000+A1 for general verification approaches.
- Information for use and marking: Updates requirements for operator instructions, warnings and machine marking consistent with EN 12629-1:2000+A1.
- Hazard zones: Illustrates and defines hazard zones in Annex B (updated references) to guide guarding and access control.
- Regulatory alignment: Includes Annex ZA and added Annex ZB clarifying how compliance supports conformity with EU Machinery Directives (98/37/EC and 2006/42/EC).
Practical applications and users
This standard is intended for:
- Machine manufacturers and designers of vertical-axis concrete pipe-making equipment - to design and document safe machines.
- Safety engineers and CE conformity assessors - to perform risk assessments, specify protective measures, and verify compliance.
- Plant owners and maintenance teams - to understand guarding zones, information for use, and marking requirements for safe operation and servicing.
- Notified bodies and regulators - to evaluate conformity with the Machinery Directive(s) where EN 12629-5-1 is cited.
Practical benefits include clearer guidance for machine design, harmonized safety verification, and support for CE marking and regulatory compliance in the concrete pipe manufacturing sector.
Related standards
- EN 12629-1:2000+A1:2010 (Common requirements for machines in the EN 12629 series)
- EN ISO 12100-1 / -2 (Safety of machinery - basic concepts and principles)
- EN 1050 (Principles for risk assessment)
- Relevant A/B-level standards (e.g., EN ISO 13850, EN ISO 13857, EN 60204-1) as identified by risk assessment
Keywords: EN 12629-5-1, vertical axis pipe making machines, safety standard, CEN, machine safety, risk assessment, EN ISO 12100, Machinery Directive 2006/42/EC, concrete pipe manufacturing.
Frequently Asked Questions
SIST EN 12629-5-1:2004/kFprA1:2010 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis". This standard covers: Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
SIST EN 12629-5-1:2004/kFprA1:2010 is classified under the following ICS (International Classification for Standards) categories: 91.220 - Construction equipment. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 12629-5-1:2004/kFprA1:2010 has the following relationships with other standards: It is inter standard links to SIST EN 12629-5-1:2004+A1:2010, SIST EN 12629-5-1:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 12629-5-1:2004/kFprA1:2010 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC, 98/37/EC; Standardization Mandates: M/079, M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 12629-5-1:2004/kFprA1:2010 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2010
6WURML]DL]GHODYRJUDGEHQLKSURL]YRGRYL]EHWRQDLQDSQHQHJDSHãþHQFD9DUQRVW
GHO 6WURML]DL]GHODYRFHYLSRQDYSLþQLRVL
Machines for the manufacture of constructional products from concrete and calcium-
silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen -
Sicherheit - Teil 5-1: Beton-Rohrmaschinen mit Fertigung in vertikaler Lage
Machines pour la fabrication de produits de construction en béton et silico-calcaire -
Sécurité - Partie 5-1: Machines pour la fabrication de tuyaux dans l'axe vertical
Ta slovenski standard je istoveten z: EN 12629-5-1:2003/FprA1
ICS:
91.220 Gradbena oprema Construction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 12629-5-1:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
February 2010
ICS 91.220
English Version
Machines for the manufacture of constructional products from
concrete and calcium-silicate - Safety - Part 5-1: Pipe making
machines manufacturing in the vertical axis
Machines pour la fabrication de produits de construction en Maschinen für die Herstellung von Bauprodukten aus Beton
béton et silico-calcaire - Sécurité - Partie 5-1: Machines und Kalksandsteinmassen - Sicherheit - Teil 5-1: Beton-
pour la fabrication de tuyaux dans l'axe vertical Rohrmaschinen mit Fertigung in vertikaler Lage
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 151.
This draft amendment A1, if approved, will modify the European Standard EN 12629-5-1:2003. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12629-5-1:2003/FprA1:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modifications to the Foreword .4
2 Modifications to the Introduction .5
3 Modifications to Clause 1 (Scope) .5
4 Modifications to Clause 2 (Normative references) .6
5 Modifications to Clause 3 (Terms and definitions) .6
6 Modifications to Clause 4 (List of significant hazards) .6
7 Modifications to Clause 5 (Safety requirements and/or measures) .6
8 Modifications to Clause 6 (Verification of safety requirements and/or measures) .7
9 Modification to Clause 7 (Information for use) .7
10 Modification to Clause 8 (Marking) .7
11 Modifications to Annex B (Hazard zones) .7
12 Modification to Annex ZA, Relationship between this European Standard and the
Essential Requirements of EU Directive 98/37/EC .8
13 Addition of a new Annex ZB, Relationship between this European Standard and the
Essential Requirements of EU Directive 2006/42/EC .8
14 Deletion of the Bibliography .9
Foreword
This document (EN 12629-5-1:2003/FprA1:2010) has been prepared by Technical Committee CEN/TC 151
“Construction equipment and building material machines - Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
1 Modifications to the Foreword
rd
Add after the 3 paragraph the following:
"For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document."
th
Replace the 4 paragraph with the following:
"The series "Machines for the manufacture of constructional products from concrete and calcium – silicate –
Safety" consists of following parts:
Part 1: Common requirements
Part 2: Block making machines
Part 3: Slide and turntable machines
Part 4: Concrete rooftile making machines
Part 5.1: Concrete pipe machines manufacturing in the vertical axis.
Part 5.2: Concrete pipe machines manufacturing in the horizontal axis
Part 5.3: Pipe prestressing machines
Part 5.4: Concrete pipe coating machines
Part 6: Stationary and mobile equipment for the manufacture of precast reinforced products
Part 7: Stationary and mobile equipment for the benched manufacture of prestressed products
Part 8: Machines and equipment for the manufacture of constructional products from calcium silicate (and
concrete)."
Delete the last but one paragraph.
2 Modifications to the Introduction
Replace the existing text with the following:
"This European Standard is a Type C-standard as stated in EN ISO 12100.
The machinery concerned and the extent to which hazards, hazardous situation and events are covered are
indicated in the scope of this document.
When provisions of this type C document are different from those, which are stated in type A or B documents,
the provisions of this type C document take precedence over the provisions of the other document
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...