SIST EN ISO 7519:2024
(Main)Technical product documentation (TPD) - Construction documentation - General principles of presentation for general arrangement and assembly drawings (ISO 7519:2024)
Technical product documentation (TPD) - Construction documentation - General principles of presentation for general arrangement and assembly drawings (ISO 7519:2024)
Establishes general requirements, thicknesses of lines, and the simplified representation of doors and windows. Describes the conventional representation, and gives arrow symbols. Annex A is for information only.
Technische Zeichnungen - Baukonstruktionszeichnungen - Allgemeine Grundlagen für Übersichts-Anordnungszeichnungen und Zusammenbauzeichnungen (ISO 7519:2024)
Diese Internationale Norm ergänzt ISO128 für Baukonstruktionszeichnungen und erstellt allgemeine Grundla
gen für die Darstellung, die bei Baukonstruktionszeichnungen für Übersicht-Anordnungspläne und den
menbau anwendbar ist, hauptsächlich auf dem Gebiet der Bau- und Architekturzeichnungen.
In diesem Dokument entspricht „Baukonstruktionszeichnung“ einer „technischen Zeichnung“ nach ISO128. Als solche muss sie im weitesten Sinne verstanden werden und sämtliche Dokumentation zum Gebäude umfas
sen.
Documentation technique de produits (TPD) - Documentation de construction - Principes généraux de présentation pour les dessins de disposition générale et d’assemblage (ISO 7519:2024)
La présente Norme internationale constitue un complément à l'ISO 128 concernant les dessins de construction et établit des principes généraux de présentation à appliquer aux dessins de construction pour des dessins d'ensemble et d'assemblage, principalement dans le domaine du bâtiment et de l'architecture
Tehnična dokumentacija izdelkov - Gradbena dokumentacija - Splošna načela prikazovanja na situacijskih in sestavnih risbah (ISO 7519:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 7519:2024
01-junij-2024
Nadomešča:
SIST EN ISO 7519:1998
Tehnična dokumentacija izdelkov - Gradbena dokumentacija - Splošna načela
prikazovanja na situacijskih in sestavnih risbah (ISO 7519:2024)
Technical product documentation (TPD) - Construction documentation - General
principles of presentation for general arrangement and assembly drawings (ISO
7519:2024)
Technische Zeichnungen - Baukonstruktionszeichnungen - Allgemeine Grundlagen für
Übersichts-Anordnungszeichnungen und Zusammenbauzeichnungen (ISO 7519:2024)
Documentation technique de produits (TPD) - Documentation de construction - Principes
généraux de présentation pour les dessins de disposition générale et d’assemblage (ISO
7519:2024)
Ta slovenski standard je istoveten z: EN ISO 7519:2024
ICS:
01.100.30 Gradbeni načrti Construction drawings
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
SIST EN ISO 7519:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 7519:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 7519:2024
EN ISO 7519
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 01.100.30 Supersedes EN ISO 7519:1996
English Version
Technical product documentation (TPD) - Construction
documentation - General principles of presentation for
general arrangement and assembly drawings (ISO
7519:2024)
Documentation technique de produits (TPD) - Technische Zeichnungen -
Documentation de construction - Principes généraux Baukonstruktionszeichnungen - Allgemeine
de présentation pour les dessins de disposition Grundlagen für Übersichts-Anordnungszeichnungen
générale et d'assemblage (ISO 7519:2024) und Zusammenbauzeichnungen (ISO 7519:2024)
This European Standard was approved by CEN on 1 March 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7519:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 7519:2024
EN ISO 7519:2024 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 7519:2024
EN ISO 7519:2024 (E)
European foreword
This document (EN ISO 7519:2024) has been prepared by Technical Committee ISO/TC 10 "Technical
product documentation" in collaboration with CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 7519:1996.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Po
...
SLOVENSKI STANDARD
oSIST prEN ISO 7519:2023
01-april-2023
Tehnična dokumentacija izdelkov - Gradbena dokumentacija - Splošna načela
prikazovanja na situacijskih in sestavnih risbah (ISO/DIS 7519:2023)
Technical product documentation (TPD) - Construction documentation - General
principles of presentation for general arrangement and assembly drawings (ISO/DIS
7519:2023)
Technische Zeichnungen - Baukonstruktionszeichnungen - Allgemeine Grundlagen für
Übersichts-Anordnungszeichnungen und Zusammenbauzeichnungen (ISO/DIS
7519:2023)
Documentation technique de produits (TPD) - Documentation de construction - Principes
généraux de présentation pour les dessins de disposition générale et d’assemblage
(ISO/DIS 7519:2023)
Ta slovenski standard je istoveten z: prEN ISO 7519
ICS:
01.100.30 Gradbeni načrti Construction drawings
oSIST prEN ISO 7519:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 7519:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 7519:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 7519
ISO/TC 10/SC 8 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-01-31 2023-04-25
Technical product documentation (TPD) — Construction
documentation — General principles of presentation for
general arrangement and assembly drawings
ICS: 01.100.30
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 7519:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 7519:2023
ISO/DIS 7519:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 7519
ISO/TC 10/SC 8 Secretariat: SIS
Voting begins on: Voting terminates on:
Technical product documentation (TPD) — Construction
documentation — General principles of presentation for
general arrangement and assembly drawings
ICS: 01.100.30
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 7519:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 7519:2023
ISO/DIS 7519:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative r
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.