SIST EN 14564:2013/oprA1:2016
(Amendment)Tanks for transport of dangerous goods - Terminology
Tanks for transport of dangerous goods - Terminology
This European Standard gives the terminology for all tanks and does not cover carriage in bulk for the transport of dangerous goods. This document is part of the standards on tanks for transport of dangerous goods, prepared by CEN/TC 296 in application of the RID/ADR [2, 3]:
- Annex A gives some definitions taken from RID/ADR chapter 1.2 ; and
- Annex B gives some definitions taken from RID/ADR chapter 6.7.
NOTE Annexes A and B are based on the 2013 edition of RID/ADR which are updated every two years. This includes the potential of temporary inconsistencies with these annexes.
Tanks für die Beförderung gefährlicher Güter - Begriffe
Citernes pour le transport des matières dangereuses - Terminologie
Cisterne za prevoz nevarnega blaga - Terminologija - Dopolnilo A1
General Information
Relations
Overview
SIST EN 14564:2013/oprA1:2016 is a European standard developed by CEN/TC 296 that establishes precise terminology for tanks used in the transport of dangerous goods. This standard complements the broader regulatory framework established by RID/ADR, focusing specifically on terminology relevant to tanks and their components. The standard excludes carriage in bulk, ensuring clear and consistent language for tank manufacturing, testing, and transport operations to enhance safety and compliance across Europe.
The 2016 amendment (prA1) introduces modifications to general terms and definitions, aligning with updates in RID/ADR and provides additional schematic references for tank openings and closures according to tank codes. This ensures harmonization and clarity in technical communication related to tanks for dangerous goods logistics.
Key Topics
- Terminology Standardization: Defines key terms related to tank components, shapes, openings, and closures, ensuring uniform understanding in transport and safety documentation.
- Tank Codes & Schematics: Introduces Annex F with detailed schematic illustrations of tank openings and closures categorized by tank codes (A, B, C, D). These schematics clarify the positioning and types of flanges, valves, internal valves, and non-return valves.
- Shape Definitions: Clarifies geometric terms relevant for tank design, such as convex, concave, and elliptical cross sections, alongside specific criteria like curvature radius and maximum widths.
- Amendments to RID/ADR References: Updates Annex A and other definitions to reflect the 2013 version of RID/ADR, noting potential temporary inconsistencies due to biannual RID/ADR updates.
- Closure Devices Definition: Adds specific terminology for closure devices, crucial for understanding how tanks are sealed during dangerous goods transport.
Applications
SIST EN 14564:2013/oprA1:2016 is essential for manufacturers, transport operators, regulatory authorities, and safety inspectors involved in the packaging, design, and transportation of dangerous goods in tanks. Key practical applications include:
- Design and Manufacturing: Engineers and designers use the standardized terms to ensure tank constructions meet legal and safety requirements, facilitating consistent communication with regulators and clients.
- Regulatory Compliance: Companies involved in dangerous goods transit reference this terminology for certification, labeling, and inspections, ensuring adherence to European transport regulations.
- Safety Training and Documentation: Safety professionals employ the standardized language for user manuals, safety data sheets, and operator training, promoting safe handling procedures.
- Technical Communication: Facilitates clear and unambiguous technical specifications and contract documentation between stakeholders across different countries and languages.
Related Standards
SIST EN 14564:2013/oprA1:2016 works in conjunction with several standards and regulations to ensure comprehensive safety and regulation of dangerous goods transport:
- RID/ADR Regulations: The standard references and aligns with the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR) and related rail transport regulations (RID).
- EN Standards on Tank Construction: Complements other CEN standards covering design, testing, and inspection of tanks for dangerous goods, such as EN 13094 and EN 13445.
- ISO Standards on Fluid Systems: Relates to broader fluid system vocabularies and tank/container standards in the ISO 4406 series for contamination control.
- National Regulations: Supports implementation of national laws in CEN member states regarding the transport and packaging of hazardous materials.
By adhering to SIST EN 14564:2013/oprA1:2016, stakeholders ensure precise terminology and schematic understanding within the transport of dangerous goods sector, enhancing operational safety, legal compliance, and cross-border communication.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2016
Cisterne za prevoz nevarnega blaga - Terminologija - Dopolnilo A1
Tanks for transport of dangerous goods - Terminology
Tanks für die Beförderung gefährlicher Güter - Begriffe
Citernes pour le transport des matières dangereuses - Terminologie
Ta slovenski standard je istoveten z: EN 14564:2013/prA1
ICS:
01.040.23 7HNRþLQVNLVLVWHPLLQVHVWDYQL Fluid systems and
GHOL]DVSORãQRUDER 6ORYDUML components for general use
(Vocabularies)
13.300 Varstvo pred nevarnimi Protection against dangerous
izdelki goods
23.020.20 Posode in vsebniki, montirani Vessels and containers
na vozila mounted on vehicles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 14564:2013
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
April 2016
ICS 01.040.13; 01.040.23; 13.300; 23.020.20
English Version
Tanks for transport of dangerous goods - Terminology
Citernes pour le transport des matières dangereuses - Tanks für die Beförderung gefährlicher Güter - Begriffe
Terminologie
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 296.
This draft amendment A1, if approved, will modify the European Standard EN 14564:2013. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14564:2013/prA1:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modifications to Clause 3, General terms . 4
2 Modification to Annex A (informative), RID/ADR definitions . 4
3 Addition of new Annex F (normative), Schematic tank openings and closures
according to the tank code . 5
European foreword
This document (EN 14564:2013/prA1:20
...
Frequently Asked Questions
SIST EN 14564:2013/oprA1:2016 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Tanks for transport of dangerous goods - Terminology". This standard covers: This European Standard gives the terminology for all tanks and does not cover carriage in bulk for the transport of dangerous goods. This document is part of the standards on tanks for transport of dangerous goods, prepared by CEN/TC 296 in application of the RID/ADR [2, 3]: - Annex A gives some definitions taken from RID/ADR chapter 1.2 ; and - Annex B gives some definitions taken from RID/ADR chapter 6.7. NOTE Annexes A and B are based on the 2013 edition of RID/ADR which are updated every two years. This includes the potential of temporary inconsistencies with these annexes.
This European Standard gives the terminology for all tanks and does not cover carriage in bulk for the transport of dangerous goods. This document is part of the standards on tanks for transport of dangerous goods, prepared by CEN/TC 296 in application of the RID/ADR [2, 3]: - Annex A gives some definitions taken from RID/ADR chapter 1.2 ; and - Annex B gives some definitions taken from RID/ADR chapter 6.7. NOTE Annexes A and B are based on the 2013 edition of RID/ADR which are updated every two years. This includes the potential of temporary inconsistencies with these annexes.
SIST EN 14564:2013/oprA1:2016 is classified under the following ICS (International Classification for Standards) categories: 01.040.23 - Fluid systems and components for general use (Vocabularies); 13.300 - Protection against dangerous goods; 23.020.20 - Vessels and containers mounted on vehicles. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14564:2013/oprA1:2016 has the following relationships with other standards: It is inter standard links to SIST EN 14564:2013, SIST EN 14564:2013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 14564:2013/oprA1:2016 is associated with the following European legislation: EU Directives/Regulations: 2008/68/EC; Standardization Mandates: M/086. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 14564:2013/oprA1:2016 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...