SIST EN 13557:2024
(Main)Cranes - Controls and control stations
Cranes - Controls and control stations
This document specifies health and safety design requirements for control devices and control stations for all types of cranes.
Specific requirements for particular types of crane are given in the appropriate European standard for the particular crane type.
Control systems are covered by other standards, e.g. EN 60204-32:2008 and EN 13135:2013+A1:2018.
This document does not deal with noise hazards because these are dealt with in safety standards for specific types of cranes. It also does not address the design of the cabin with regard to its sound insulation properties.
This document covers specific hazards, which could occur during the use of control devices and control stations. It does not cover hazards, which could occur during transport, construction, modification, de-commissioning or disposal. The hazards covered by this standard are identified in Clause 4.
This document is applicable after the date of approval by CEN of this standard.
Krane - Stellteile und Steuerstände
Dieses Dokument legt Sicherheits- und Gesundheitsschutzanforderungen an die Gestaltung von Leitgeräten und Steuerständen fest, die in allen Kranarten eingebaut sind.
Spezifische Anforderungen für bestimmte Kranarten sind in den entsprechenden Europäischen Normen für die jeweiligen Kranarten angegeben.
Steuerungssysteme werden in anderen Normen behandelt, z. B. in EN 60204 32:2008 und EN 13135:2013+A1:2018.
Dieses Dokument behandelt keine Gefährdungen durch Lärm, da diese in Sicherheitsnormen für spezifische Kranarten behandelt werden. Außerdem behandelt es nicht die Konstruktion des Führerhauses hinsichtlich der Schallisolierungseigenschaften.
Dieses Dokument behandelt spezifische Gefährdungen, die während der Benutzung von Leitgeräten und Steuerständen auftreten könnten. Es behandelt keine Gefährdungen, die während Transport, Bau, Änderung, Außerbetriebnahme oder Entsorgung auftreten könnten. Die in dieser Norm behandelten Gefährdungen sind in Abschnitt 4 beschrieben.
Dieses Dokument gilt ab dem Datum der Annahme dieser Norm durch CEN.
Appareils de levage à charge suspendue - Commandes et postes de commande
Le présent document spécifie les prescriptions de sécurité et de santé relatives à la conception des dispositifs de commande et des postes de commande pour tous types d’appareils de levage à charge suspendue.
Les prescriptions particulières pour des types particuliers d’appareils de levage à charge suspendue sont données dans la Norme européenne correspondant au type particulier d’appareil de levage à charge suspendue.
Les systèmes de commande font l’objet d’autres normes, par exemple l’EN 60204-2:2008 et l’EN 13135:2013+A1:2018.
Le présent document ne traite pas des phénomènes dangereux liés au bruit, qui font l’objet de normes de sécurité pour des types spécifiques d’appareils de levage à charge suspendue. Il ne traite pas non plus de la conception de la cabine du point de vue de l’isolation phonique.
Le présent document couvre les phénomènes dangereux spécifiques qui peuvent survenir durant l’utilisation de dispositifs de commande et de postes de commande. Il ne couvre pas les risques qui peuvent survenir durant le transport, la construction, la modification, la mise hors service ou au rebut. Les phénomènes dangereux couverts par la présente norme sont identifiés à l’Article 4.
Le présent document est applicable à partir de la date à laquelle le CEN a approuvé cette norme.
Žerjavi - Krmilja in krmilna mesta
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13557:2024
01-julij-2024
Žerjavi - Krmilja in krmilna mesta
Cranes - Controls and control stations
Krane - Stellteile und Steuerstände
Appareils de levage à charge suspendue - Commandes et postes de commande
Ta slovenski standard je istoveten z: EN 13557:2024
ICS:
53.020.20 Dvigala Cranes
SIST EN 13557:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13557:2024
---------------------- Page: 2 ----------------------
SIST EN 13557:2024
EN 13557
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 53.020.20 Supersedes EN 13557:2003+A2:2008
English Version
Cranes - Control devices and control stations
Appareils de levage à charge suspendue - Commandes Krane - Stellteile und Steuerstände
et postes de commande
This European Standard was approved by CEN on 12 February 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13557:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13557:2024
EN 13557:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Requirements . 7
4.1 Control devices . 7
4.1.1 General. 7
4.1.2 Control levers and joysticks . 7
4.1.3 Push buttons . 7
4.1.4 Pedals . 7
4.1.5 Touch screen controls . 8
4.2 Control stations . 8
4.2.1 General. 8
4.2.2 Cable connected control stations . 8
4.2.3 Cableless control stations .
...
SLOVENSKI STANDARD
oSIST prEN 13557:2021
01-marec-2021
Dvigala (žerjavi) - Upravljala in upravljalna mesta
Cranes - Controls and control stations
Krane - Stellteile und Steuerstände
Appareils de levage à charge suspendue - Commandes et postes de commande
Ta slovenski standard je istoveten z: prEN 13557
ICS:
53.020.20 Dvigala Cranes
oSIST prEN 13557:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13557:2021
---------------------- Page: 2 ----------------------
oSIST prEN 13557:2021
DRAFT
EUROPEAN STANDARD
prEN 13557
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2021
ICS 53.020.20 Will supersede EN 13557:2003+A2:2008
English Version
Cranes - Controls and control stations
Appareils de levage à charge suspendue - Commandes Krane - Stellteile und Steuerstände
et postes de conduite
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 147.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13557:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13557:2021
prEN 13557:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Significant hazards . 7
5 Requirements . 8
5.1 Control devices and control stations . 8
5.1.1 General. 8
5.1.2 Control levers and joysticks . 8
5.1.3 Push buttons . 9
5.1.4 Pedals . 9
5.1.5 Touch screen controls .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.