oSIST prEN IEC 60115-4-10:2025/oprAA:2025
(Amendment)Fixed resistors for use in electronic equipment - Part 4-10: Blank detail specification: Power resistors with axial leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
Fixed resistors for use in electronic equipment - Part 4-10: Blank detail specification: Power resistors with axial leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
This part of IEC 60115 is applicable to fixed power resistors with axial leads for through hole assembly (THT) on circuit boards for use in electronic equipment.
The document is applicable to the drafting of detail specifications for fixed low-power film resistors with leads classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals.
This detail specification is based upon the blank detail specification IEC 60115-4-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 4-10: Vordruck für Bauartspezifikation: Leistungswiderstände mit axialen Anschlüssen für die Durchsteckmontage auf Leiterplatten (THT), für Geräte der Elektronik, Klassifizierungsstufe G
Résistances fixes utilisées dans les équipements électroniques - Partie 4-10: Spécification particulière cadre: Résistance de puissance à pattes axiales pour montage par trous traversants sur circuits imprimés (THT), pour équipement électronique général, classification niveau G
Stalni upori za elektronsko opremo - 4-10. del: Okvirna podrobna specifikacija - Močnostni upori z aksialnimi priključki za montažo skozi prehodne luknje tiskanih vezij (THT) za univerzalno elektronsko opremo, razvrščeni kot nivo G - Dopolnilo AA
General Information
- Status
- Not Published
- Public Enquiry End Date
- 31-Dec-2025
- Technical Committee
- I11 - Imaginarni 11
- Current Stage
- 4020 - Public enquire (PE) (Adopted Project)
- Start Date
- 22-Oct-2025
- Due Date
- 11-Mar-2026
- Completion Date
- 22-Dec-2025
Relations
- Effective Date
- 01-Oct-2024
Overview
oSIST prEN IEC 60115-4-10:2025/oprAA:2025 is a CLC draft European Standard addressing fixed power resistors with axial leads, specifically designed for through-hole technology (THT) assembly on printed circuit boards (PCBs). This standard forms part of the broader IEC 60115 series, focusing on blank detail specifications for resistors intended for use in general electronic equipment. Components covered are classified as Level G according to IEC 60115-1:2020, which denotes their suitability for environments where the main requirement is functionality, with typical applications in consumer electronics and telecommunications user terminals.
The document sets the framework for drafting specific detail specifications, ensuring that quality assessment procedures and test schedules match international requirements. By defining performance criteria and cross-references, it supports effective component standardization and international market access.
Key Topics
- Scope: The standard applies to fixed, low-power film resistors with axial leads for THT assembly in general electronic equipment, classified as Level G.
- Applicability: Intended for equipment operated under benign or moderate environmental conditions, emphasizing reliable function over harsh environment endurance.
- Specification Structure: Provides a blank template for drafting detail specifications, including fields for termination plating and greater flexibility in component identification.
- Modification and Clarification:
- Clarifies identification fields and document titles to improve consistency and traceability.
- Updates cross-references and annexes to align with the latest editions of related documents.
- Test Schedules and Performance: Enables component manufacturers and designers to assess resistors’ conformance through detailed test schedules as defined in Annex Q of IEC 60115-1:2020.
- Normative and Informative References: Incorporates direct references to essential documents such as IEC 60062 (marking codes), IEC 60063 (preferred numbers), IEC 60286-1 (component packaging), and others relevant to resistor standardization and quality assessment.
Applications
oSIST prEN IEC 60115-4-10:2025/oprAA:2025 is practically valuable for:
- Component Manufacturers: Provides a standardized approach for documenting and qualifying fixed power resistors with axial leads for THT, facilitating product acceptance across international markets.
- PCB Designers and Assemblers: Ensures compatibility and reliable performance of resistors used in through-hole assembly for consumer electronics, telecommunications equipment, and general-purpose electronic devices.
- Procurement and Quality Engineers: Streamlines the component selection and procurement process through harmonized performance and testing criteria, helping maintain supply chain efficiency.
- Technical Documentation and Regulatory Compliance: Supports the drafting of detail specifications that conform to European and international standards, ensuring regulatory compliance and enhancing traceability.
Typical end-use environments include:
- Consumer electronics: Radios, televisions, home appliances, and personal devices.
- Telecommunications user terminals: Network hardware, modems, and communication interface devices.
Related Standards
The document is closely linked with several foundational and supporting standards, including:
- IEC 60115-1:2020 - Fixed resistors for use in electronic equipment - Generic specification (classification levels and quality assessment procedures)
- IEC 60115-4:2022 - Sectional specification for power resistors for THT or chassis assembly
- IEC 60062 - Marking codes for resistors and capacitors
- IEC 60063 - Preferred number series for resistors and capacitors
- IEC 60286-1 - Packaging for components with axial leads
- IEC 60294 - Measurement of component dimensions
- IEC 60301 - Preferred wire termination diameters
- EN 61193-2:2007 - Selection and use of sampling plans for inspection of electronic components
By aligning with these standards, oSIST prEN IEC 60115-4-10:2025/oprAA:2025 facilitates interoperability, quality assurance, and ease of integration within the global electronics industry.
Frequently Asked Questions
oSIST prEN IEC 60115-4-10:2025/oprAA:2025 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Fixed resistors for use in electronic equipment - Part 4-10: Blank detail specification: Power resistors with axial leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G". This standard covers: This part of IEC 60115 is applicable to fixed power resistors with axial leads for through hole assembly (THT) on circuit boards for use in electronic equipment. The document is applicable to the drafting of detail specifications for fixed low-power film resistors with leads classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-4-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
This part of IEC 60115 is applicable to fixed power resistors with axial leads for through hole assembly (THT) on circuit boards for use in electronic equipment. The document is applicable to the drafting of detail specifications for fixed low-power film resistors with leads classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-4-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
oSIST prEN IEC 60115-4-10:2025/oprAA:2025 is classified under the following ICS (International Classification for Standards) categories: 31.040.10 - Fixed resistors. The ICS classification helps identify the subject area and facilitates finding related standards.
oSIST prEN IEC 60115-4-10:2025/oprAA:2025 has the following relationships with other standards: It is inter standard links to oSIST prEN IEC 60115-4-10:2025. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
oSIST prEN IEC 60115-4-10:2025/oprAA:2025 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2025
Stalni upori za elektronsko opremo - 4-10. del: Okvirna podrobna specifikacija -
Močnostni upori z aksialnimi priključki za montažo skozi prehodne luknje tiskanih
vezij (THT) za univerzalno elektronsko opremo, razvrščeni kot nivo G - Dopolnilo
AA
Fixed resistors for use in electronic equipment - Part 4-10: Blank detail specification:
Power resistors with axial leads for through-hole assembly on circuit boards (THT), for
general electronic equipment, classification level G
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 4-10: Vordruck für
Bauartspezifikation: Leistungswiderstände mit axialen Anschlüssen für die
Durchsteckmontage auf Leiterplatten (THT), für Geräte der Elektronik,
Klassifizierungsstufe G
Résistances fixes utilisées dans les équipements électroniques - Partie 4-10:
Spécification particulière cadre: Résistance de puissance à pattes axiales pour montage
par trous traversants sur circuits imprimés (THT), pour équipement électronique général,
classification niveau G
Ta slovenski standard je istoveten z: prEN IEC 60115-4-10:2025/prAA:2025
ICS:
31.040.10 Fiksni upor Fixed resistors
oSIST prEN IEC 60115-4- en
10:2025/oprAA:2025
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60115-4-10:2025
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2025
ICS 31.040.10 -
English Version
Fixed resistors for use in electronic equipment - Part 4-10: Blank
detail specification: Power resistors with axial leads for through-
hole assembly on circuit boards (THT), for general electronic
equipment, classification level G
Résistances fixes utilisées dans les équipements Festwiderstände zur Verwendung in Geräten der Elektronik
électroniques - Partie 4-10: Spécification particulière cadre: - Teil 4-10: Vordruck für Bauartspezifikation:
Résistance de puissance à pattes axiales pour montage par Leistungswiderstände mit axialen Anschlüssen für die
trous traversants sur circuits imprimés (THT), pour Durchsteckmontage auf Leiterplatten (THT), für Geräte der
équipement électronique général, classification niveau G Elektronik, Klassifizierungsstufe G
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60115-4-10:2025; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2026-01-09.
It has been drawn up by CLC/TC 40XB.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 80569 Ref. No. prEN IEC 60115-4-10:2025/prAA:2025 E
1 Contents Page
2 European foreword 3
3 1 Modification to subclause 0.3, “Identification of the detail specification and the resistor” 4
4 2 Modification to the title proposed for the detail specification 4
5 3 Modification to Annex X, “Cross-reference for references to the prior revision of this
6 specification” 4
7 4 Addition of annexes 4
8 Annex ZA (normative) Normative references to international publications with their corresponding
9 European publications 5
10 Annex ZX (informative) Cross-references for references to the prior revision of this document 7
prEN 60115-4-10:2025/prAA:2025 (E)
12 European foreword
13 This document (prEN 60115-4-10:2025/prAA:2025) has been prepared by CLC/TC 40XB, “Resistors”.
14 This document is currently submitted to the Enquiry.
15 The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
16 Previous documents on the subject covered by this specification have been:
17 — EN 140202:1996-11
18 — EN 140203:1996-11
19 — CECC 40 201:1981-00
20 — CECC 40 202:1981-00
21 — CECC 40 203:1981-00
22 Clauses, subclauses, annexes, notes, tables and figures which are additional to those in IEC 60115-4-10:2023
23 are prefixed “Z”.
oSI
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...