SIST EN IEC 60115-2-10:2026/A11:2026
(Amendment)Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G
This part of IEC 60115 is applicable to leaded fixed low-power film resistors for use in electronic equipment and is applicable to the drafting of detail specifications for leaded fixed low-power film resistors classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. The resistors covered herein are classified to level G, as defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-2-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2-10: Vordruck für Bauartspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für Durchsteckmontage auf Leiterplatten (THT), für allgemeine Geräte der Elektronik, Klassifikationsstufe G
Résistances fixes utilisées dans les équipements électroniques - Partie 2-10: Spécification particulière-cadre: Résistances à broches à couche, à faible dissipation, pour assemblage par trous traversants sur cartes de circuit imprimé (carte THT) pour des équipements électroniques généraux, niveau de classification G
Stalni upori za elektronsko opremo - 2-10. del: Okvirna podrobna specifikacija: Tankoplastni upori majhne moči z izvodi za montažo skozi prehodne luknje tiskanih vezij, za splošno elektronsko opremo, razvrstilna raven G - Dopolnilo A11
General Information
- Status
- Published
- Public Enquiry End Date
- 26-Dec-2024
- Publication Date
- 29-Apr-2026
- Technical Committee
- I11 - Imaginarni 11
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 15-Apr-2026
- Due Date
- 20-Jun-2026
- Completion Date
- 30-Apr-2026
Relations
- Effective Date
- 01-Jun-2026
Overview
SIST EN IEC 60115-2-10:2026/A11:2026 is a European standard developed by CLC, focusing on the specification of fixed resistors for use in electronic equipment. This part addresses low-power film resistors with leads intended for through-hole technology (THT) assembly on circuit boards. It specifically concerns resistors classified at level G, as defined in IEC 60115-1:2020, 3.4, intended for general electronic equipment typically operating under benign or moderate environmental conditions. Level G resistors are commonly found in consumer electronics and telecommunications user terminals, where primary requirements center on functional performance rather than extreme reliability or precision.
Key Topics
- Scope: Defines requirements and quality assessment methods for leaded, fixed, low-power film resistors used in general electronic equipment (classification level G).
- Blank Detail Specification: The document serves as a template for drafting detail specifications for this resistor type, supporting consistency and clarity in the industry.
- Environmental Classification: Applies to conditions where equipment is subject only to moderate stress, reinforcing suitability for mainstream consumer and telecom applications.
- Quality Assessment: Outlines performance verification and test schedules, relying on methods and procedures prescribed in IEC 60115-1:2020, Annex Q.
- Modification and Amendments: Includes changes to titles, clauses, and annexes to align with evolving industry requirements and ensure unambiguous specification drafting.
- Normative References: Establishes references to relevant international and European standards covering marking, packaging, dimensional measurement, and quality processes.
Applications
SIST EN IEC 60115-2-10:2026/A11:2026 is crucial for manufacturers, designers, and quality assurance teams in:
- Consumer Electronics: Televisions, audio equipment, and home appliances benefit from reliable, standardized low-power resistors.
- Telecommunications Equipment: User terminals, modems, and interface devices require cost-effective solutions that meet functional needs.
- General Electronic Devices: Any electronic module or system that operates in benign conditions and does not necessitate resistors designed for harsh environments.
- PCB Assembly: Supports through-hole assembly, essential for designs prioritizing robustness, ease of repair, and cost considerations in mass production.
- Supplier and Procurement Specifications: Provides a reference framework for sourcing and specifying resistors in contracts and component databases.
Key benefits of applying this standard include improved product reliability through standardized test schedules, simplified procurement through harmonized component specifications, and enhanced compliance with international quality benchmarks.
Related Standards
The following standards are closely associated with SIST EN IEC 60115-2-10:2026/A11:2026, and are referenced for harmonized resistor specification and assessment:
- IEC 60115-1:2020: Fixed resistors for use in electronic equipment - Part 1: Generic specification.
- IEC 60062: Marking codes for resistors and capacitors.
- IEC 60063: Preferred number series for resistors and capacitors.
- IEC 60286-1: Packaging of components for automatic handling (tape packaging of components with axial leads).
- IEC 60294: Measurement of dimensions of cylindrical components with axial terminations.
- IEC 60301: Preferred diameters for wire terminations of capacitors and resistors.
- IEC 61193-2: Quality assessment systems for inspection of electronic components.
- IEC 61760-1: Surface mounting technology - specification for SMD components, relevant for mixed technology boards.
By adhering to SIST EN IEC 60115-2-10:2026/A11:2026, stakeholders ensure compatibility, safety, and performance of fixed low-power film resistors, supporting a strong foundation for dependable electronic product design and manufacturing.
Frequently Asked Questions
SIST EN IEC 60115-2-10:2026/A11:2026 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G". This standard covers: This part of IEC 60115 is applicable to leaded fixed low-power film resistors for use in electronic equipment and is applicable to the drafting of detail specifications for leaded fixed low-power film resistors classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. The resistors covered herein are classified to level G, as defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-2-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
This part of IEC 60115 is applicable to leaded fixed low-power film resistors for use in electronic equipment and is applicable to the drafting of detail specifications for leaded fixed low-power film resistors classified to level G, which is defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. The resistors covered herein are classified to level G, as defined in IEC 60115-1:2020, 3.4 for general electronic equipment, typically operated under benign or moderate environmental conditions, where the major requirement is function. Examples for level G include consumer products and telecommunication user terminals. This detail specification is based upon the blank detail specification IEC 60115-2-10:202X. This detail specification establishes test schedules and performance requirements permitting the quality assessment of the resistors covered herein according to the quality assessment procedures prescribed by IEC 60115-1:2020, Annex Q.
SIST EN IEC 60115-2-10:2026/A11:2026 is classified under the following ICS (International Classification for Standards) categories: 31.040.10 - Fixed resistors. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN IEC 60115-2-10:2026/A11:2026 has the following relationships with other standards: It is inter standard links to SIST EN IEC 60115-2-10:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN IEC 60115-2-10:2026/A11:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2026
Stalni upori za elektronsko opremo - 2-10. del: Okvirna podrobna specifikacija:
Tankoplastni upori majhne moči z izvodi za montažo skozi prehodne luknje
tiskanih vezij, za splošno elektronsko opremo, razvrstilna raven G - Dopolnilo A11
Fixed resistors for use in electronic equipment - Part 2-10: Blank detail specification:
Low-power film resistors with leads for through-hole assembly on circuit boards (THT),
for general electronic equipment, classification level G
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2-10: Vordruck für
Bauartspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für
Durchsteckmontage auf Leiterplatten (THT), für allgemeine Geräte der Elektronik,
Klassifikationsstufe G
Résistances fixes utilisées dans les équipements électroniques - Partie 2-10:
Spécification particulière-cadre: Résistances à broches à couche, à faible dissipation,
pour assemblage par trous traversants sur cartes de circuit imprimé (carte THT) pour
des équipements électroniques généraux, niveau de classification G
Ta slovenski standard je istoveten z: EN IEC 60115-2-10:2026/A11:2026
ICS:
31.040.10 Fiksni upor Fixed resistors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60115-2-
10:2026/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2026
ICS 31.040.10
English Version
Fixed resistors for use in electronic equipment - Part 2-10: Blank
detail specification: Low-power film resistors with leads for
through-hole assembly on circuit boards (THT), for general
electronic equipment, classification level G
Résistances fixes utilisées dans les équipements Festwiderstände zur Verwendung in Geräten der Elektronik
électroniques - Partie 2-10: Spécification particulière-cadre: - Teil 2-10: Vordruck für Bauartspezifikation:
Résistances à broches à couche, à faible dissipation, pour Niedrigbelastbare Schichtwiderstände mit
assemblage par trous traversants sur cartes de circuit Drahtanschlüssen für Durchsteckmontage auf Leiterplatten
imprimé (carte THT) pour des équipements électroniques (THT), für allgemeine Geräte der Elektronik,
généraux, niveau de classification G Klassifikationsstufe G
This amendment A11 modifies the European Standard EN IEC 60115-2-10:2026; it was approved by CENELEC on 2026-02-09. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60115-2-10:2026/A11:2026 E
Contents Page
European foreword . 3
1 Modification to Clause 0.3 . 3
2 Modification to the title proposed for the detail specification . 4
3 Modification to Annex X . 4
4 Addition of Annex ZA . 4
European foreword
This document (EN IEC 60115-2-10:2026/A11:2026) consists of the text of IEC 60115-2-10:2023 prepared by
CLC/
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...