SIST EN IEC 60115-2:2026/A11:2026
(Amendment)Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT)
Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT)
This part of IEC 60115 is applicable to fixed low-power film resistors with termination leads for use in electronic equipment, which are typically assembled in through-hole technology (THT) on circuit boards. These resistors are typically described according to types (different geometric shapes) and styles (different dimensions) and product technology. The resistive element of these resistors is typically protected by a conformal lacquer coating. These resistors have wire terminations and are primarily intended to be mounted on a circuit board in through-hole technique. The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60115-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of resistor. Since the documents of the 60115-X series are exempted from the parallel procedure (D162/C089), this New Work Item Proposal aims to endorse the main IEC document IEC 60115-2:2023 as a European standard. The standard shall be published together with the finalised Common Modifications.
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2: Rahmenspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für Durchsteckmontage auf Leiterplatten (THT)
Résistances fixes utilisées dans les équipements électroniques - Partie 2: Spécification intermédiaire: Résistances à couches et à faible dissipation équipées de broches pour assemblage par trous traversants sur circuits imprimés (THT)
Stalni upori za elektronsko opremo - 2. del: Področna specifikacija: Tankoplastni upori majhne moči z izvodi za montažo skozi prehodne luknje tiskanih vezij - Dopolnilo A11
General Information
- Status
- Published
- Public Enquiry End Date
- 26-Dec-2024
- Publication Date
- 29-Apr-2026
- Technical Committee
- I11 - Imaginarni 11
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 15-Apr-2026
- Due Date
- 20-Jun-2026
- Completion Date
- 30-Apr-2026
Relations
- Effective Date
- 01-Jun-2026
Overview
SIST EN IEC 60115-2:2026/A11:2026 is a European standard published by CENELEC (CLC) that addresses fixed, low-power film resistors with wire leads for through-hole technology (THT) applications in electronic equipment. This document serves as a sectional specification, which outlines the essential requirements, ratings, and quality assessment procedures for these resistors, ensuring their suitability for reliable use in circuit board assembly. The standard consolidates best practices for resistor types defined by geometric shapes, styles, and protective coatings, and harmonizes European regulations with the main IEC 60115-2:2023 international standard, including relevant common modifications and cross-references.
Key Topics
- Scope: Covers fixed low-power film resistors with leads intended for THT assembly on printed circuit boards.
- Types and Styles: Specifies resistor variants categorized by geometric configuration and dimensional characteristics.
- Protection: Details the use of conformal lacquer coatings that safeguard resistive elements.
- Termination: Focuses on resistors with wire terminations designed for through-hole mounting.
- Preferred Ratings and Characteristics: Defines standardized ratings, tolerances, and performance parameters for consistency across the industry.
- Quality Assessment and Testing:
- Selects appropriate procedures from IEC 60115-1 for quality evaluation.
- Includes guidelines for tests such as solderability, resistance to soldering heat, environmental testing (vibration, temperature, etc.), and dimensional measurement.
- Cross-References: Incorporates updated references to previous versions and existing standards, ensuring clarity in technical documentation.
Applications
SIST EN IEC 60115-2:2026/A11:2026 provides crucial value across various sectors utilizing electronic equipment:
- Printed Circuit Board (PCB) Assembly: Ensures THT film resistors are compatible with established assembly processes for consistent electrical performance.
- Consumer Electronics: Supports manufacturers designing reliable resistive components for household and personal devices.
- Industrial Automation and Controls: Facilitates compliance and standardization for resistors used in control circuits, monitoring systems, and instrumentation.
- Medical Devices: Helps guarantee safety and reliability of resistor components used in electronic medical equipment.
- Automotive Electronics: Provides guidelines for components exposed to demanding environmental conditions, supporting durability and quality.
- Professional and Telecommunications Equipment: Helps ensure long-term stability and interoperability of fixed resistors in critical circuitry.
By adhering to the requirements of this standard, manufacturers and designers enhance product quality, simplify procurement, and streamline conformity assessment procedures.
Related Standards
The SIST EN IEC 60115-2:2026/A11:2026 standard references and aligns with several key international and European standards to assure comprehensive quality and compatibility, including:
- IEC 60115-1 / EN 60115-1: Generic specification for fixed resistors in electronic equipment.
- IEC 60062 / EN 60062: Marking codes for resistors and capacitors.
- IEC 60063 / EN 60063: Preferred number series for resistors and capacitors.
- IEC 60068-1 / EN 60068-1: Environmental testing - General guidance.
- IEC 60068-2-6 / EN 60068-2-6: Environmental testing – Vibration (sinusoidal).
- IEC 60068-2-20 / EN IEC 60068-2-20: Solderability and resistance to soldering heat.
- IEC 60294 / EN 60294: Measurement of dimensions for cylindrical components.
- IEC 61193-2 / EN 61193-2: Quality assessment systems and sampling plans.
- IEC 60286-1 / EN 60286-1: Packaging of axial leaded components for automatic handling.
- IEC 60301 / EN 60301: Preferred diameters for component wire termination.
Utilizing these standards alongside SIST EN IEC 60115-2:2026/A11:2026 enables manufacturers, engineers, and quality managers to maintain high product standards and meet international market requirements.
Frequently Asked Questions
SIST EN IEC 60115-2:2026/A11:2026 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT)". This standard covers: This part of IEC 60115 is applicable to fixed low-power film resistors with termination leads for use in electronic equipment, which are typically assembled in through-hole technology (THT) on circuit boards. These resistors are typically described according to types (different geometric shapes) and styles (different dimensions) and product technology. The resistive element of these resistors is typically protected by a conformal lacquer coating. These resistors have wire terminations and are primarily intended to be mounted on a circuit board in through-hole technique. The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60115-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of resistor. Since the documents of the 60115-X series are exempted from the parallel procedure (D162/C089), this New Work Item Proposal aims to endorse the main IEC document IEC 60115-2:2023 as a European standard. The standard shall be published together with the finalised Common Modifications.
This part of IEC 60115 is applicable to fixed low-power film resistors with termination leads for use in electronic equipment, which are typically assembled in through-hole technology (THT) on circuit boards. These resistors are typically described according to types (different geometric shapes) and styles (different dimensions) and product technology. The resistive element of these resistors is typically protected by a conformal lacquer coating. These resistors have wire terminations and are primarily intended to be mounted on a circuit board in through-hole technique. The object of this standard is to prescribe preferred ratings and characteristics and to select from IEC 60115-1, the appropriate quality assessment procedures, tests and measuring methods and to give general performance requirements for this type of resistor. Since the documents of the 60115-X series are exempted from the parallel procedure (D162/C089), this New Work Item Proposal aims to endorse the main IEC document IEC 60115-2:2023 as a European standard. The standard shall be published together with the finalised Common Modifications.
SIST EN IEC 60115-2:2026/A11:2026 is classified under the following ICS (International Classification for Standards) categories: 31.040.10 - Fixed resistors. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN IEC 60115-2:2026/A11:2026 has the following relationships with other standards: It is inter standard links to SIST EN IEC 60115-2:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN IEC 60115-2:2026/A11:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2026
Stalni upori za elektronsko opremo - 2. del: Področna specifikacija: Tankoplastni
upori majhne moči z izvodi za montažo skozi prehodne luknje tiskanih vezij -
Dopolnilo A11
Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Low-
power film resistors with leads for through-hole assembly on circuit boards (THT)
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 2:
Rahmenspezifikation: Niedrigbelastbare Schichtwiderstände mit Drahtanschlüssen für
Durchsteckmontage auf Leiterplatten (THT)
Résistances fixes utilisées dans les équipements électroniques - Partie 2: Spécification
intermédiaire: Résistances à couches et à faible dissipation équipées de broches pour
assemblage par trous traversants sur circuits imprimés (THT)
Ta slovenski standard je istoveten z: EN IEC 60115-2:2026/A11:2026
ICS:
31.040.10 Fiksni upor Fixed resistors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60115-2:2026/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2026
ICS 31.040.10
English Version
Fixed resistors for use in electronic equipment - Part 2: Sectional
specification: Low-power film resistors with leads for through-
hole assembly on circuit boards (THT)
Résistances fixes utilisées dans les équipements Festwiderstände zur Verwendung in Geräten der Elektronik
électroniques - Partie 2: Spécification intermédiaire: - Teil 2: Rahmenspezifikation: Niedrigbelastbare
Résistances à broches à couche, à faible dissipation, pour Schichtwiderstände mit Drahtanschlüssen für
assemblage par trous traversants sur cartes de circuit Durchsteckmontage auf Leiterplatten (THT)
imprimé (carte THT)
This amendment A11 modifies the European Standard EN IEC 60115-2:2026; it was approved by CENELEC on 2026-02-09. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60115-2:2026/A11:2026 E
Contents Page
European foreword . 3
1 Modification to Annex X . 4
2 Addition of Annex ZA . 4
3 Addition of a new Annex ZX. 6
European foreword
This document (EN IEC 60115-2:2026/A11:2026) has been prepared by CLC/TC 40XB, “Resistors”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2027-04-30
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2029-04-30
conflicting with this document have to be withdrawn
Clauses, subclauses, annexes, notes, tables and figures which are additional to those in IEC 60115-2:2023 are
prefixed “Z”.”
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A complete
listing of these bodies can be found on the CENELEC website.
SIST EN IEC
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...