prEN IEC 60115-4-10:2025/prAA:2025

SLOVENSKI STANDARD
01-december-2025
Stalni upori za elektronsko opremo - 4-10. del: Okvirna podrobna specifikacija -
Močnostni upori z aksialnimi priključki za montažo skozi prehodne luknje tiskanih
vezij (THT) za univerzalno elektronsko opremo, razvrščeni kot nivo G - Dopolnilo
AA
Fixed resistors for use in electronic equipment - Part 4-10: Blank detail specification:
Power resistors with axial leads for through-hole assembly on circuit boards (THT), for
general electronic equipment, classification level G
Festwiderstände zur Verwendung in Geräten der Elektronik - Teil 4-10: Vordruck für
Bauartspezifikation: Leistungswiderstände mit axialen Anschlüssen für die
Durchsteckmontage auf Leiterplatten (THT), für Geräte der Elektronik,
Klassifizierungsstufe G
Résistances fixes utilisées dans les équipements électroniques - Partie 4-10:
Spécification particulière cadre: Résistance de puissance à pattes axiales pour montage
par trous traversants sur circuits imprimés (THT), pour équipement électronique général,
classification niveau G
Ta slovenski standard je istoveten z: prEN IEC 60115-4-10:2025/prAA:2025
ICS:
31.040.10 Fiksni upor Fixed resistors
oSIST prEN IEC 60115-4- en
10:2025/oprAA:2025
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD DRAFT
prEN IEC 60115-4-10:2025
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
October 2025
ICS 31.040.10 -
English Version
Fixed resistors for use in electronic equipment - Part 4-10: Blank
detail specification: Power resistors with axial leads for through-
hole assembly on circuit boards (THT), for general electronic
equipment, classification level G
Résistances fixes utilisées dans les équipements Festwiderstände zur Verwendung in Geräten der Elektronik
électroniques - Partie 4-10: Spécification particulière cadre: - Teil 4-10: Vordruck für Bauartspezifikation:
Résistance de puissance à pattes axiales pour montage par Leistungswiderstände mit axialen Anschlüssen für die
trous traversants sur circuits imprimés (THT), pour Durchsteckmontage auf Leiterplatten (THT), für Geräte der
équipement électronique général, classification niveau G Elektronik, Klassifizierungsstufe G
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60115-4-10:2025; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2026-01-09.
It has been drawn up by CLC/TC 40XB.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 80569 Ref. No. prEN IEC 60115-4-10:2025/prAA:2025 E

1 Contents Page
2 European foreword 3
3 1 Modification to subclause 0.3, “Identification of the detail specification and the resistor” 4
4 2 Modification to the title proposed for the detail specification 4
5 3 Modification to Annex X, “Cross-reference for references to the prior revision of this
6 specification” 4
7 4 Addition of annexes 4
8 Annex ZA (normative) Normative references to international publications with their corresponding
9 European publications 5
10 Annex ZX (informative) Cross-references for references to the prior revision of this document 7
prEN 60115-4-10:2025/prAA:2025 (E)
12 European foreword
13 This document (prEN 60115-4-10:2025/prAA:2025) has been prepared by CLC/TC 40XB, “Resistors”.
14 This document is currently submitted to the Enquiry.
15 The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
16 Previous documents on the subject covered by this specification have been:
17 — EN 140202:1996-11
18 — EN 140203:1996-11
19 — CECC 40 201:1981-00
20 — CECC 40 202:1981-00
21 — CECC 40 203:1981-00
22 Clauses, subclauses, annexes, notes, tables and figures which are additional to those in IEC 60115-4-10:2023
23 are prefixed “Z”.
oSI
...