SIST EN 13265:2016
(Main)Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in liquid waste containment projects, and the appropriate test methods to determine these characteristics.
The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, reinforcement and protection.
This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318 1.
This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures.
Particular application cases may contain requirements regarding additional properties and – preferably standardized – test methods, if they are technically relevant.
This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN 1997 1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.
Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in Projekten zum Einschluss flüssiger Abfallstoffe
Diese Europäische Norm legt die wichtigsten Eigenschaften von Geotextilien und geotextilverwandten Produkten, die in Projekten zum Einschluss flüssiger Abfallstoffe verwendet werden, sowie die geeigneten Prüfverfahren zur Bestimmung dieser Eigenschaften fest.
Bei ihrer vorgesehenen Anwendung werden diese Geotextilien und geotextilverwandten Produkte eine oder mehrere der folgenden Funktionen erfüllen: Filtern Bewehren und Schützen.
Diese Europäische Norm ist nicht auf geosynthetische Dichtungsbahnen anwendbar, wie in EN ISO 10318-1 festgelegt.
Diese Europäische Norm behandelt die Bewertung und Überprüfung der Leistungsbeständigkeit des Produkts nach dieser Europäischen Norm und die Verfahren für die werkseigene Produktionskontrolle.
Besondere Anwendungen können Anforderungen hinsichtlich zusätzlicher Eigenschaften und - vorzugsweise genormte - Prüfverfahren enthalten, wenn diese technisch relevant sind.
Diese Europäische Norm darf zur Festlegung von Bemessungswerten herangezogen werden, in dem die im Zusammenhang mit den in EN 1997-1 (Eurocode 7) angegebenen Definitionen berücksichtigt werden, z. B. Sicherheitsbeiwerte. Für das Produkt sollte die Bemessungsdauer festgelegt werden, weil seine Funktion zeitlich befristet sein darf, als Einbauhilfe, oder dauerhaft, der Lebensdauer des Bauwerks entsprechend.
Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les projets de confinement de déchets liquides
La présente Norme européenne spécifie les caractéristiques pertinentes des géotextiles et produits apparentés utilisés dans les projets de confinement de déchets liquides, ainsi que les méthodes d'essai appropriées pour déterminer ces caractéristiques.
L'utilisation prévue de ces géotextiles ou produits apparentés est de remplir au moins l'une des fonctions suivantes : filtration, renforcement et protection.
La présente Norme européenne ne s'applique pas aux géomembranes et géosynthétiques bentonitiques tels que définis dans l'EN ISO 10318 1.
La présente Norme européenne permet d'évaluer et de vérifier la constance des performances du produit à la présente Norme européenne et les procédures de contrôle de la production en usine.
Des cas d'application particuliers peuvent contenir des exigences sur des propriétés supplémentaires et méthodes d'essai – si possible normalisées – si elles sont techniquement pertinentes.
La présente Norme européenne peut être utilisée pour déduire les valeurs de calcul en prenant en compte les facteurs définis dans l'EN 1997 1 (Eurocode 7), par exemple les facteurs de sécurité. Il convient de déterminer la durée de vie prévue du produit, puisque sa fonction peut être provisoire, pour des besoins de construction, ou permanente, pour la durée de vie de la structure.
Geotekstilije in geotekstilijam sorodni izdelki - Značilnosti, ki se zahtevajo pri obvladovanju tekočih odpadkov
Ta evropski standard določa pomembne značilnosti geotekstilij in geotekstilijam sorodnih izdelkov, ki se uporabljajo pri obvladovanju tekočih odpadkov, ter ustrezne preskusne metode za določitev teh značilnosti.
Te geotekstilije in geotekstilijam sorodni izdelki naj bi imeli eno ali več naslednjih funkcij: filtriranje, ojačitev in zaščita.
Ta evropski standard se ne uporablja za geosintetične zapore, kakor so opredeljene v standardu EN ISO 10318.
Ta evropski standard omogoča ocenjevanje in preverjanje stalnosti funkcionalnosti izdelka v skladu s tem evropskim standardom ter postopke kontrole proizvodnje v obratu.
OPOMBA: Posamezni primeri uporabe lahko vključujejo zahteve glede dodatnih lastnosti in – po možnosti standardiziranih – preskusnih metod, če so tehnično pomembni.
Ta evropski standard se lahko uporablja za izpeljavo projektnih vrednosti ob upoštevanju dejavnikov v okviru definicij iz standarda EN 1997 1 (Evrokod 7), npr. dejavnikov varnosti. Določila naj bi se projektna življenjska doba izdelka, saj je njegova funkcija začasna, kot zagotavljanje primernosti za gradnjo, ali stalna, tj. za življenjsko dobo konstrukcije.
General Information
- Status
- Published
- Public Enquiry End Date
- 02-Mar-2016
- Publication Date
- 09-Nov-2016
- Technical Committee
- ITEK - Textile and textile products
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 21-Oct-2016
- Due Date
- 26-Dec-2016
- Completion Date
- 10-Nov-2016
Relations
- Effective Date
- 01-Dec-2016
Overview
EN 13265:2016 (CEN) defines the characteristics required for geotextiles and geotextile-related products used in liquid waste containment projects. The standard covers products intended to provide filtration, reinforcement and protection in containment systems (but excludes geosynthetic barriers as defined in EN ISO 10318‑1). EN 13265:2016 specifies the relevant properties, the appropriate test methods, and procedures for assessment and verification of constancy of performance (AVCP) and factory production control (FPC). It also supports deriving design values within the context of Eurocode 7 (EN 1997‑1) and addresses durability and service‑life considerations.
Key topics and technical requirements
- Intended functions: Filtration, reinforcement, protection in liquid waste containment.
- Exclusions: Not applicable to geosynthetic barriers (see EN ISO 10318‑1).
- Required characteristics and tests: The standard references established test methods for properties such as:
- Tensile performance (EN ISO 10319)
- Static puncture / CBR test (EN ISO 12236)
- Water permeability normal to the plane (EN ISO 11058)
- Characteristic opening size / filtration (EN ISO 12956)
- Friction characteristics (EN ISO 12957‑1 / ‑2)
- Durability and weathering (EN 12224, EN 12226, EN 12447, EN ISO 13438)
- Mechanical damage (EN ISO 10722, EN ISO 13433), creep (EN ISO 13431), seam/joint strength (EN ISO 10321)
- Durability / service life: Annex B provides guidance and test requirements for service lives ranging from short‑term (up to 5 years) to long‑term use (25, 50, 100 years) with related testing.
- Quality systems: Annex A details factory production control (FPC) requirements and surveillance/testing frequencies.
- Regulatory linkage: Annex ZA aligns clauses with the EU Construction Products Regulation (CPR), DoP and CE marking requirements.
Practical applications
EN 13265:2016 is used to specify and verify geotextiles in:
- Liquid waste containment liners, drainage and protection layers in waste treatment plants and lagoons
- Retention basins, sludge treatment and process tanks where filtration and reinforcement are required
- Temporary or permanent installations where long‑term performance and compatibility with containment systems are critical
Who uses this standard
- Geotextile manufacturers and product engineers (product declarations, AVCP, FPC)
- Design engineers and geotechnical consultants (selection, deriving design values)
- Contractors and installers (specification compliance, installation checks)
- Testing laboratories and certification bodies (performance verification)
- Regulators and procurement teams specifying CE‑marked products for containment projects
Related standards
Key referenced standards include EN ISO 10319, EN ISO 11058, EN ISO 12236, EN ISO 12956, EN ISO 10318‑1 and relevant durability and testing standards listed in the normative references of EN 13265:2016.
Frequently Asked Questions
SIST EN 13265:2016 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects". This standard covers: This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in liquid waste containment projects, and the appropriate test methods to determine these characteristics. The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, reinforcement and protection. This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318 1. This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures. Particular application cases may contain requirements regarding additional properties and – preferably standardized – test methods, if they are technically relevant. This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN 1997 1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.
This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in liquid waste containment projects, and the appropriate test methods to determine these characteristics. The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, reinforcement and protection. This European Standard is not applicable to geosynthetic barriers, as defined in EN ISO 10318 1. This European Standard provides for the assessment and verification of constancy of performance of the product to this European Standard and for factory production control procedures. Particular application cases may contain requirements regarding additional properties and – preferably standardized – test methods, if they are technically relevant. This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in EN 1997 1 (Eurocode 7), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.
SIST EN 13265:2016 is classified under the following ICS (International Classification for Standards) categories: 13.030.20 - Liquid wastes. Sludge; 59.080.70 - Geotextiles. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13265:2016 has the following relationships with other standards: It is inter standard links to SIST EN 13265:2014+A1:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13265:2016 is associated with the following European legislation: EU Directives/Regulations: 305/2011; Standardization Mandates: M/107, M/386. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13265:2016 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in Projekten zum Einschluss flüssiger AbfallstoffeGéotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les projets de confinement de déchets liquidesGeotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects59.080.70GeotekstilijeGeotextiles13.030.20Liquid wastes. SludgeICS:Ta slovenski standard je istoveten z:EN 13265:2016SIST EN 13265:2016en,fr,de01-december-2016SIST EN 13265:2016SLOVENSKI
STANDARDSIST EN 13265:2014+A1:20151DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13265
October
t r s x ICS
w {ä r z rä y r Supersedes EN
s u t x wã t r s v ªA sã t r s wEnglish Version
Geotextiles and geotextileærelated products æ Characteristics required for use in liquid waste containment projects Géotextiles et produits apparentés æ Caractéristiques requises pour l 5utilisation dans les projets de confinement de déchets liquides
Geotextilien und geotextilverwandte Produkte æ Geforderte Eigenschaften für die Anwendung in Projekten zum Einschluss flüssiger Abfallstoffe This European Standard was approved by CEN on
v June
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u t x wã t r s x ESIST EN 13265:2016
Factory production control . 15 A.1 Factory production control scheme . 15 A.1.1 General . 15 A.1.2 Product design . 15 A.1.3 Production . 15 A.1.4 Finished products . 15 A.1.5 Provisions applicable to A.1.2, A.1.3 and A.1.4 (to be used where appropriate) . 16 A.2 Assessment of a factory production control (FPC) system. 17 A.2.1 General . 17 A.2.2 Checklist . 17 SIST EN 13265:2016
Durability aspects . 22 B.1 General . 22 B.1.1 Service life . 22 B.1.2 Initial and repeat testing of durability. 22 B.1.3 Use of rework material . 23 B.2 Weathering (all products) . 23 B.3 Products used in non-reinforcing applications and with service lives up to 5 years . 23 B.4 Other applications and service lives up to 25 years, 50 years and 100 years . 24 B.4.1 General . 24 B.4.2 Tests for specific materials . 24 Annex C (informative)
Guidelines for the selection of the appropriate standard in a specific application . 28 Annex D (informative)
Significant technical changes to the superseded standard . 30 Annex ZA (informative)
Clauses of this European Standard addressing the provisions of the EU Construction Products Regulation . 31 ZA.1 Scope and relevant characteristics . 31 ZA.2 Procedure for AVCP of Geotextiles and geotextiles-related products for the use in the construction of liquid waste containment projects . 34 ZA.2.1 Systems of AVCP . 34 ZA.2.2 Declaration of performance (DoP) . 37 ZA.3 CE marking and labelling . 41 Bibliography . 42
EN 14574 – – A (11) Characteristic opening size EN ISO 12956 A – - - (12) Water permeability normal to the plane (velocity index) EN ISO 11058 A S - - (13) Durability According to Annex B A A A SIST EN 13265:2016
A: relevant to all conditions of use
S: relevant to specific conditions of use
“–”: indicates that the characteristic is not relevant for that function. a
Static puncture resistance may not be relevant for some types of products, e.g. GGR, GCO-R or GST. b
If the mechanical properties (tensile strength and static puncture) are coded “A” in this Table, the use of only one, either tensile strength or static puncture, is usually sufficient in a project specification. c
The strength of internal structural junctions of geocells shall be tested in accordance with EN ISO 13426-1. d
The strength of internal structural junctions of geocomposites shall be tested in accordance with EN ISO 13426-2. SIST EN 13265:2016
For the durability aspects, see Table 1 and Annex B. SIST EN 13265:2016
Factory production control A.1 Factory production control scheme A.1.1 General The items to be addressed in the factory production control manual relating to the system of control, determined from 5.4, are given in A.1. The single steps of factory production control are addressed in the check-list (A.2). NOTE Manufacturers operating an FPC system, which complies with EN ISO 9001 and which addresses the provisions of this European Standard, are considered to be able to satisfy the FPC requirements of this European Standard. A.1.2 Product design The manufacturer shall describe how product design requirements and criteria are identified, checked, controlled and updated to be unambiguous and relevant to the use of the product and its specification. The manufacturer shall describe the communication of the product design to the internal production departments or to external subcontractors. A.1.3 Production A.1.3.1 Raw or incoming materials The manufacturer shall define the acceptance criteria of raw or incoming materials and the procedures that he operates to ensure that these are met. The manufacturer shall document by analyses and/or certificates from his suppliers that all raw or incoming materials meet the declared performance, including durability performance. A.1.3.2 Production process The relevant features of the plant and production process shall be defined giving the frequency of the inspections, checks and tests, together with the values or criteria required on equipment and on work in process. The actions to be taken when control values or criteria are not obtained shall be recorded. These records shall be available for inspection. A.1.4 Finished products A.1.4.1 Tests on the finished product The size of the samples and the frequency of sampling, together with the results obtained, shall be recorded. These records shall be available for inspection. A.1.4.2 Alternative tests Where alternative tests to the reference tests are used, details of the alternative tests and procedures together with their correlation with the reference tests shall be recorded and shall be made available for inspection. SIST EN 13265:2016
Design 1.1 – Has the manufacturer a description how design requirements and criteria are identified, checked, controlled and updated to be unambiguous and relevant to the use of the product and its specification? To be assessed only if claimed by the manufacturer Refer to the manufacturer's documentation. 1.2 – Has the manufacturer a description of the communication of the design to the internal production departments or to external subcontractors? To be assessed only if claimed by the manufacturer. Refer to the manufacturer's documentation. 2 Product identification and traceability 2.1 – What are the means used for the unique identification of any individual finished product? E Refer to the manufacturer's documentation. 2.2 – Is it possible to identify and check date, place and general manufacturing conditions E Refer to the manufacturer's SIST EN 13265:2016
3 Production process control 3.1 – Are there documents which define the production process parameters which could affect quality? E Refer to the manufacturer's documentation. 3.2 –Are the standards and procedures implemented? E
3.3 – Are the specified requirements concerning process validation, including the associated personnel and equipment, documented? E Refer to the manufacturer's documentation. 4 Inspection and testing on receipt of raw materials 4.1 – Are there specification sheets concerning incoming raw materials? E Refer to the manufacturer's documentation. 4.2 – Are there documents which define what shall be done in case of non-conformance of raw materials? E Refer to the manufacturer's documentation. 4.3 – Are the nature and frequency of the evaluation of incoming raw materials described and followed? E Refer to the manufacturer's documentation. 5 Inspection and testing during manufacturing 5.1 – Are there inspections or tests during the manufacturing process with specific requirement for the results? E Refer to the manufacturer's documentation. 5.2 – Are there documents concerning inspection or testing during the manufacturing process with requirement for the results? E Refer to the manufacturer's documentation. 5.3 – Do they define what shall be done in case of non-conformance of the product with the requirements? E Refer to the manufacturer's documentation. 5.4 – Are non-conforming products isolated from conform products when they are detected during manufacturing? E Refer to the manufacturer's documentation. 5.5 – Is there a procedure for handling non-conforming products? E Refer to the manufacturer's documentation. 6 Final inspection and testing 6.1 – Are there installations, equipment and personnel for final inspection and tests? E Refer to the manufacturer's documentation. This requirement may be fulfilled by concluding a subcontracting SIST EN 13265:2016
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...