SIST-TP CEN/CLC/TR 17912:2023

SLOVENSKI STANDARD
01-marec-2023
Sistemi Hyperloop - Popis standardov in načrt
Hyperloop systems - Standards Inventory and Roadmap
Hyperloop-Systeme - Normeninventar und Fahrplan
Systèmes Hyperloop - Inventaire des normes et feuille de route
Ta slovenski standard je istoveten z: CEN/CLC/TR 17912:2023
ICS:
03.220.99 Druge oblike transporta Other forms of transport
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT CEN/CLC/TR 17912

RAPPORT TECHNIQUE
TECHNISCHER REPORT
January 2023
ICS 03.220.99; 55.020
English version
Hyperloop systems - Standards Inventory and Roadmap
Systèmes Hyperloop - Inventaire des normes et feuille Hyperloop-Systeme - Normeninventar und Fahrplan
de route
This Technical Report was approved by CEN on 25 December 2022. It has been drawn up by the Technical Committee
CEN/CLC/JTC 20.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.

CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2023 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. CEN/CLC/TR 17912:2023 E
reserved worldwide for CEN national Members and for
CENELEC Members.
Contents
European foreword . 3
0 Introduction . 4
0.1 General. 4
0.2 Context . 4
0.3 Purpose . 4
1 Scope . 5
1.1 General. 5
1.2 Methodology . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Technical report architecture . 6
4.1 TR architecture introduction . 6
4.2 Architecture . 6
5 Standards inventory and roadmap. 7
5.1 Introduction . 7
5.2 General safety requirements . 9
5.2.1 Risk assessment and safety targets . 9
5.2.2 Design principles with respect to safety and reliability . 10
5.2.3 Basis of structural and mechanical design assumptions and analysis . 12
5.2.4 Materials . 13
5.3 System design . 19
5.3.1 Vehicle . 19
5.3.2 Guideway . 30
5.3.3 Energy and power . 42
5.3.4 Safety-related control system and communications. 44
5.3.5 Electromagnetic compatibility and exposure. 47
5.3.6 Batteries . 48
5.4 Operation and maintenance . 51
5.4.1 Operation . 51
5.4.2 Maintenance . 52
5.5 Fire protection and evacuation. 55
5.5.1 Fire protection . 55
5.5.2 Evacuation . 56
5.6 Security . 57
5.6.1 Physical security . 57
5.6.2 Information security . 58
5.7 Conformity assessment . 59
5.7.1 Accreditation . 59
5.7.2 Certification / Inspection . 59
5.7.3 Testing . 62
5.8 Other . 64
Annex A (informative) Technical report architecture. 71

European foreword
This document (CEN/CLC/TR 17912:2023) has been prepared by Joint Technical Committee
CEN/CLC/JTC 20 “Hyperloop systems”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
0 Introduction
0.1 General
The objective of this document is to initially gather relevant existing standards as well as legislative
documents in order to identify the standards that can be potentially utilized in hyperloop. Some of these
standards are generic, technology agnostic and as such can also be applicable to hyperloop. A set of the
standards developed specifically for other transport modes and industries are a useful reference for the
future standards development in hyperloop. Especially the type of standards that will be required in
specific areas of system design provide for the first steps towards a standardization roadmap for the
hyperloop standards.
This document identifies the main areas of the standardization roadmap and provides the first inventory
of standards and legislative documents relevant to hyperloop Systems.
This document will be subject to future modifications and additions which will be incorporated into the
future versions. This takes into account the fact that the hyperloop technology is in full development.
0.2 Context
The hyperloop is a new technology which is being developed by several companies around the globe.
The hyperloop is a new means of transportation for large volumes of passengers and cargo, based on new
or emerging technologies such as low pressure environment or magnetic levitation, able to travel at very
high speeds, protected from bad weather conditions and other external conditions, with very low
environmental impact in terms of energy consumption, emission of greenhouse gases and other
pollutants, and noise emission.
A new means of transportation as ambitious and innovative as the hyperloop will need a large set of
standards to achieve different goals such as safety and security, efficiency, low time to market, and
compliance to regulations.
Following the expectation that there are several existing standards that could be (partially) reused, this
document aims at helping to identify those and the respective areas.
0.3 Purpose
The standards inventory contained in this document is created to take these standards, directives and
regulations into account, as input to the development of standards for hyperloop, and hence serve as a
valuable tool for the hyperloop industry and legislative authorities and regulators.
1 Scope
1.1 General
The original scope from N17 (NWI CEN/CLC TR Hyperloop systems - Standards inventory and roadmap)
reads as follows:
This document lists the relevant standards from various fields and provides a standardization roadmap for
hyperloop systems. The roadmap will provide guidance on the applicable standards from various fields,
those that need amending and the new-to be developed standards.
1.2 Methodology
The CEN-CENELEC/JTC 20 has listed the relevant documents (standards, directives, etc) from various
fields in order to provide a baseline for a standardization roadmap for hyperloop systems. The resulting
document hence enhances the scope as it provides guidance on the applicable relevant documents from
various fields that the working group has identified, analysed and proposed for an application in the
hyperloop field.
The following document is a first inventory that identifies
— those standards that the WG considers fully applicable,
— those deemed useful with certain adaptations for an application in hyperloop (or serving as an input
for new, specific hyperloop standards to be created),
— and those that the WG considers not directly applicable for hyperloop purposes.
In addition, this document identifies relevant regulations, directives and related documents as well as
some potential areas where new hyperloop standards will be needed.
It needs to be stated that the WG has done its best endeavour to identify the (partial) reusability for
hyperloop based on the available information (high-level descriptions of the standards, tables of contents,
summary documents etc).
In a next step, a roadmap will provide some guidance regarding those areas and point at new-to be
developed standards for which a need has been identified. The yet-to-be-created roadmap will also
sketch out the concrete steps to be taken w.r.t. to the development of the necessary hyperloop standards.
Moreover, an alignment with the other WIs will be performed, as it is important that all WIs are aligned
and use the same language.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Technical report architecture
4.1 TR architecture introduction
This standards inventory has been classified according to the basic structure of the “Hyperloop Standards
Desk Review” (January 2021) published by the Non-Traditional and Emerging Transportation
Technology (NETT) Council of the US. Department of Transportation.
Some additional elements have been added to the NETT Council structure.
A graphic representation of the technical report architecture is contained in Annex A.
4.2 Architecture
General Safety Requirements
Risk Assessment and Safety Targets
Design Principles with Respect to Safety and Reliability
Basis of Structural and Mechanical Design Assumptions and Analysis
Materials
System design
Vehicle
Vehicle Design Criteria
Suspension and Vibrations
General Travel Comfort & related Systems
Passengers with restricted mobility
Electrical Systems, Electronics and software on boards
Bogie & Wheels
Braking
Miscellaneous
Guideway
Eurocode Series Standards
Free-Span Tube
Pylons
Buried/Submerged Tube
Tube Vacuum Technology
Energy and power
Safety-Related Control System and Communications
Electromagnetic Compatibility and Exposure
Batteries
Operation and Maintenance
Operation
System Shutdown
Automated Systems
Maintenance
Fire protection and evacuation
Fire protection
Evacuation
Security
Physical Security
Information Security
Conformity Assessment
Accreditation
Certification / Inspection
Testing
Other
5 Standards inventory and roadmap
5.1 Introduction
All references listed in the following tables have been classified in three groups:
I. Applicable
II. Useful as a reference, meaning that the degree of applicability to hyperloop systems has not yet been
established or thoroughly evaluated. This is the case, for example of many of the standards and
legislative documents that come from the aeronautic or railway industry.
III. Not directly applicable, meaning that the reference has been revised by CEN/CLC/JTC 20 “Hyperloop
systems” “Operation and Services” and has been found as not directly applicable.
A set of European standards is developed under Frankfurt/Vienna agreement and as such has an
equivalent ISO/IEC standard. For such standard the European Standard is listed. When known the
equivalent international ISO/IEC standard is referred as well.
A set of relevant European and/or international legislative references originating from the governmental
institutions is referred separately at the end of each table.
5.2 General safety requirements
5.2.1 Risk assessment and safety targets
CODE TITLE DOCUMENT APPLICABILITY

OWNER
ISO/IEC 31000 Risk management. Guidelines ISO/IEC Applicable
document
ISO/IEC 31010 Risk management. Risk assessment ISO/IEC Applicable
techniques document
EN 50518 Monitoring and alarm receiving CENELEC Applicable
centre document
ISO/IEC Guide 51 Safety aspects. Guidelines for their ISO/IEC Applicable
inclusion in standards document
IEC 62267 Railway applications - Automated IEC Useful reference
urban guided transport (AUGT) -
Safety requirements
EN 16601-80 Space project management - Part CEN/CENELEC Useful reference
80: Risk management
IEC 61511 Functional safety—Safety IEC Useful reference
instrumented systems for the
process industry sector
Directives, Regulations and related documents
Article 6(3)(a) of the Guide for the application of the European Useful reference
Railway Safety Directive Commission Regulation on the Railway Agency
ERA/GUI/01–2008/SAF adoption of a common safety
method on risk evaluation and
assessment
DEF STAN 00-56 Safety Management Requirements UK Ministry of Useful reference
for Defence Systems Defence
MIL-STD-882E Department of Defence standard USA Department Useful reference
practice. System safety of Defence
5.2.2 Design principles with respect to safety and reliability
CODE TITLE DOCUMENT APPLICABILITY
OWNER
ISO 3745 Acoustics — Determination of sound ISO Applicable
power levels and sound energy levels document
of noise sources using sound pressure
— Precision methods for anechoic
rooms and hemi-anechoic rooms
EN 62305 (parts 1 to 4) Protection against lightning CENELEC Applicable
document
ISO 2041 Mechanical vibration, shock and ISO Useful reference
condition monitoring — Vocabulary
EN ISO 3095 Acoustics - Railway applications - CEN Useful reference
Measurement of noise emitted by rail
bound vehicles
EN ISO 3381 Railway applications - Acoustics - CEN Useful reference
Noise measurement inside rail bound
vehicles (ISO/DIS 3381:2021)
EN 15461 Railway applications - Noise emission CEN Useful reference
- Characterization of the dynamic
properties of track sections for pass
by noise measurements
EN 50122-1 Railway applications - Fixed CENELEC Useful reference
installations - Electrical safety,
earthing and the return circuit -
Part 1: Protective provisions against
electric shock
EN 50122-2 Railway applications - Fixed CENELEC Useful reference
installations - Electrical safety,
earthing and the return circuit -
Part 2: Provisions against the effects
of stray currents caused by d.c.
traction systems
CENELEC Report R009– Railway applications—Systematic CENELEC Useful reference
004:2001 allocation of safety integrity
requirements
EN 17285 Railway applications - Acoustics - CEN Not directly
applicable
Measuring of door audible warnings
CEN/TC256/WG 03 Railway applications – acoustics - CEN Not directly
Pending Number Measurement of source terms for applicable
environmental noise calculations
RTCA/DO-254 Design Assurance Guidance for American Useful reference
Airborne Electronic Hardware Radio
Technical
Commission
CODE TITLE DOCUMENT APPLICABILITY
OWNER
for
Aeronautics.
RTCA/DO-160 Environmental Conditions and Test American Useful reference
Procedures for Airborne Equipment Radio
Technical
Commission
for
Aeronautics.
SAE ARP 4754A Guidelines for Development of Civil US Society of Useful reference
Aircraft and Systems Automotive
Engineering
SAE GEIASTD0010 Standard Best Practices for System US Society of Useful reference
Safety Program Development and Automotive
Execution Engineering
Directives, Regulations and related documents
(EU) No 1321/2014 Continuing airworthiness of aircraft European Useful reference
and aeronautical products, parts and Commission
appliances, and on the approval of
organisations and personnel involved
in these tasks
FAA Standards - 14 CFR Code of Federal Regulations - US Federal Useful reference
Part 25 C Title 14 Aeronautics and Space - Aviation
Chapter I federal aviation Administration
administration, department of
transportation -
Subchapter C aircraft -
Part 25 airworthiness standards:
transport category airplanes -
Subpart C Structure
FAA Standards - 14 CFR Code of Federal Regulations - US Federal Useful reference
Part 25 D Title 14 Aeronautics and Space - Aviation
Chapter I federal aviation Administration
administration, department of
transportation -
Subchapter C aircraft -
Part 25 airworthiness standards:
transport category airplanes -
Subpart D Design and Construction
The Canadian Aviation Airworthiness Government of Not directly
Regulations (SOR/96– Canada applicable
433) - Part V
5.2.3 Basis of structural and mechanical design assumptions and analysis
CODE TITLE DOCUMENT APPLICABILITY

OWNER
EN 15227 Railway applications. Crashworthiness CEN Useful reference
requirements for rail vehicles
EN 17343 Railway applications - General terms CEN Not directly
and definitions applicable
CEN/TC250/WG4 Prospect for new guidance in the European Useful reference
Report on Reinforced design of FRP - Support to the Commission -
Polymer or Plastic implementation, harmonization and Joint Research
(FRP) further development of the Eurocodes Centre
AS 5100 series Bridge design Standards Not directly
Australia applicable
Directives, Regulations and related documents
Advisory Circular AC Damage Tolerance and Fatigue US Federal Useful reference
25.571–1D Evaluation of Structure Aviation
Administration
NASA-HDBK-5005 Standard for the Design and US National Useful reference
Fabrication of Ground Support Aeronautics
Equipment and Space
Administration
NFPA 101 Life Safety Code US National Useful reference
Fire Protection
Association
NFPA 5000 Building Construction and Safety Code US National Useful reference
Fire Protection
Association
AASHTO LRFDUS Bridge Design Specifications American Not directly
Association of applicable
State Highway
and
Transportation
Officials
5.2.4 Materials
CODE TITLE DOCUMENT APPLICABILITY

OWNER
ISO 6780 Flat pallets for ISO Applicable
intercontinental materials document
handling — Principal
dimensions and tolerances
EN 10029 Hot-rolled steel plates 3 mm CEN Applicable
thick or above - Tolerances on document
dimensions and shape
EN 10051 Continuously hot-rolled strip CEN Applicable
and plate/sheet cut from wide document
strip of non-alloy and alloy
steels - Tolerances on
dimensions and shape
EN 10056-1 Structural steel equal and CEN Applicable
unequal leg angles - Part 1: document
Dimensions
EN 10056-2 Structural steel equal and CEN Applicable
unequal leg angles - Part 2: document
Tolerances on shape and
dimensions
EN 10106 Cold rolled non-oriented CEN Applicable
electrical steel sheet and strip document
delivered in the fully
processed state
EN 10107 Grain-oriented electrical steel CEN Applicable
strip and sheet delivered in document
the fully processed state
EN 10111 Continuously hot rolled low CEN Applicable
carbon steel sheet and strip document
for cold forming - Technical
delivery conditions
EN 10120 Steel sheet and strip for CEN Applicable
welded gas cylinders document
EN 10130 Cold rolled low carbon steel CEN Applicable
flat products for cold forming - document
Technical delivery conditions
EN 10131 Cold rolled uncoated and zinc CEN Applicable
or zinc-nickel electrolytically document
coated low carbon and high
yield strength steel flat
products for cold forming -
Tolerances on dimensions and
shape
CODE TITLE DOCUMENT APPLICABILITY

OWNER
EN 10139 Cold rolled uncoated mild CEN Applicable
steel narrow strip for cold document
forming - Technical delivery
conditions
EN 10140 Cold rolled narrow steel strip - CEN Applicable
Tolerances on dimensions and document
shape
EN 10143 Continuously hot-dip coated CEN Applicable
steel sheet and strip - document
Tolerances on dimensions and
shape
EN 10152 Electrolytically zinc coated CEN Applicable
cold rolled steel flat products document
for cold forming - Technical
delivery conditions
EN 10162 Cold rolled steel sections - CEN Applicable
Technical delivery conditions - document
Dimensional and cross-
sectional tolerances
EN 10164 Steel products with improved CEN Applicable
deformation properties document
perpendicular to the surface of
the product - Technical
delivery conditions
EN 10169 Continuously organic coated CEN Applicable
(coil coated) steel flat document
products - Technical delivery
conditions
EN 10204 Metallic products - Types of CEN Applicable
inspection documents.
document
Steel and metallic products
including fasteners shall be
accompanied with material
certificates according to EN
10204 or equivalent
attestation.
EN 10207 Steels for simple pressure CEN Applicable
vessels - Technical delivery document
requirements for plates, strips
and bars
EN 10268 Cold rolled steel flat products CEN Applicable
with high yield strength for document
cold forming - Technical
delivery conditions
CODE TITLE DOCUMENT APPLICABILITY

OWNER
EN 10338 Hot rolled and cold rolled non- CEN Applicable
coated products of multiphase document
steels for cold forming -
Technical delivery conditions
EN 10341 Cold rolled electrical non-alloy CEN Applicable
and alloy steel sheet and strip document
delivered in the semi-
processed state
EN 10342 Magnetic materials - CEN Applicable
Classification of surface document
insulations of electrical steel
sheet, strip and laminations
EN 10346 Continuously hot-dip coated CEN Applicable
steel flat products - Technical document
delivery conditions
EN 10359 Laser welded tailored blanks - CEN Applicable
Technical delivery conditions document
EN 10363 Continuously hot-rolled CEN Applicable
patterned steel strip and document
plate/sheet cut from wide
strip - Tolerances on
dimensions and shape
EN 10365 Hot rolled steel channels, I and CEN Applicable
H sections - Dimensions and document
masses
EN 10025-1 Hot rolled products of CEN Applicable
structural steels - General document
technical delivery conditions
EN 10025-2 Hot rolled products of CEN Applicable
structural steels - Part 2: document
Technical delivery conditions
for non-alloy structural steels
EN 10025-3 Hot rolled products of CEN Applicable
structural steels - Part 3: document
Technical delivery conditions
for normalized/normalized
rolled weldable fine grain
structural steels
EN 10025-4 Hot rolled products of CEN Applicable
structural steels - Part 4: document
Technical delivery conditions
for thermomechanical rolled
weldable fine grain structural
steels
CODE TITLE DOCUMENT APPLICABILITY

OWNER
EN 10025-5 Hot rolled products of CEN Applicable
structural steels - Part 5: document
Technical delivery conditions
for structural steels with
improved atmospheric
corrosion resistance
EN 10025-6 Hot rolled products of CEN Applicable
structural steels - Part 6: document
Technical delivery conditions
for flat products of high yield
strength structural steels in
the quenched and tempered
condition
EN 10028-1 Flat products made of steels CEN Applicable
for pressure purposes - Part 1: document

General requirements
EN 10028-2 Flat products made of steels CEN Applicable
for pressure purposes - Part 2: document
Non-alloy and alloy steels with
specified elevated
temperature properties
EN 10028-3 Flat products made of steels CEN Applicable
for pressure purposes - Part 3: document
Weldable fine grain steels,
normalized
EN 10028-4 Flat products made of steels CEN Applicable
for pressure purposes - Part 4: document
Nickel alloy steels with
specified low temperature
properties
EN 10028-5 Flat products made of steels CEN Applicable
for pressure purposes - Part 5: document
Weldable fine grain steels,
thermomechanically rolled
EN 10028-6 Flat products made of steels CEN Applicable
for pressure purposes - Part 6: document
Weldable fine grain steels,
quenched and tempered
EN 10149-1 Hot rolled flat products made CEN Applicable
of high yield strength steels for document
cold forming - General
technical delivery conditions
EN 10149-2 Hot rolled flat products made CEN Applicable
of high yield strength steels for document
cold forming - Technical
delivery conditions for
CODE TITLE DOCUMENT APPLICABILITY

OWNER
thermomechanically rolled
steels
EN 10149-3 Hot rolled flat products made CEN Applicable
of high yield strength steels for document
cold forming - Technical
delivery conditions for
normalized or normalized
rolled steels
EN 13674-1 Railway applications - Track - CEN Applicable
Rail - Part 1: vignole railway document
rails 46 kg/m and above
EN 13674-2 Railway applications - Track - CEN Applicable
Rail - Part 2: switch and document
crossing rails used in
conjunction with Vignole
railway rails 46 kg/m and
above
IEC 60404-8-10 Magnetic materials - Part 8– IEC Applicable
10: specifications for document
individual materials -
Magnetic materials (iron and
steel) for use in relays
IEC 60404-8-6 Magnetic materials - Part 8–6: IEC Applicable
Specifications for individual document
materials - Soft magnetic
metallic materials
EN ISO 683-1 Heat-treatable steels, alloy CEN Applicable
steels and free-cutting steels - document
Non-alloy steels for quenching
and tempering
EN ISO 683-2 Heat-treatable steels, alloy CEN Applicable
steels and free-cutting steels - document
Alloy steels for quenching and
tempering
EN ISO 683-3 Heat-treatable steels, alloy CEN Applicable
steels and free-cutting steels - document
Case-hardening steels
EN 17460 Railway Applications - CEN Useful reference
Adhesive bonding of rail
vehicles and rail vehicle parts
EN ISO 898 Mechanical properties of CEN Useful reference
fasteners made of carbon steel
and alloy steel
CODE TITLE DOCUMENT APPLICABILITY

OWNER
CEN/TC256/SC 2/WG 54 Pending Railway applications - Rescue CEN Useful reference
Number coupler - Performance
requirements, specific
interface geometry and test
methods
EN 14399 High-strength structural CEN Not directly
bolting assemblies for applicable
preloading
ASTM A1008/A1008M Standard Specification for American Not directly
Steel, Sheet, Cold-Rolled, Society for applicable
Carbon, Structural, High- Testing
Strength Low-Alloy, High- Materials
Strength Low-Alloy with
Improved Formability,
Solution Hardened, and Bake
Hardenable
ASTM A240/A240M REV A Standard Specification for American Not directly
Chromium and Chromium-Society for applicable
Nickel Stainless Steel Plate, Testing
Sheet, and Strip for Pressure Materials
Vessels and for General
Applications
ASTM A572/A572M Standard Specification for American Not directly
High-Strength Low-Alloy Society for applicable
Columbium-Vanadium Testing
Structural Steel Materials
ASTM A773/A773M Standard Test Method for American Not directly
Direct Current Magnetic Society for applicable
Properties of Low Coercivity Testing
Magnetic Materials Using Materials
Hysteresigraphs
ASTM A848 Standard Specification for American Not directly
Low-Carbon Magnetic Iron Society for applicable
Testing
Materials
ASTM B152/B152M Standard Specification for American Not directly
Copper Sheet, Strip, Plate, and Society for applicable
Rolled Bar Testing
Materials
ASTM B187/B187M Standard Specification for American Not directly
Copper, Bus Bar, Rod, and Society for applicable
Shapes and General Purpose Testing
Rod, Bar, and Shapes Materials
CODE TITLE DOCUMENT APPLICABILITY

OWNER
ASTM B209 Standard Specification for American Not directly
Aluminum and Aluminum-Society for applicable
Alloy Sheet and Plate Testing
Materials
ASTM B48 Standard Specification for Soft American Not directly
Rectangular and Square Bare Society for applicable
Copper Wire for Electrical Testing
Conductors Materials
ASTM B633 Standard Specification for American Not directly
Electrodeposited Coatings of Society for applicable
Zinc on Iron and Steel Testing
Materials
ASTM B700 Standard Specification for American Not directly
Electrodeposited Coatings of Society for applicable
Silver for Engineering Use Testing
Materials
Directives, Regulations and related documents
Directive 2011/65/EU Restriction of Hazardous European Useful reference
Substances Directive Commission
NASA-STD-6016 Standard Materials and US National Useful reference
Processes Requirements for Aeronautics
Spacecraft and Space
Administration
MIL-A-8625F Anodic Coatings for Aluminum USA Not directly
and Aluminum Alloys Department of applicable
Defense
5.3 System design
5.3.1 Vehicle
5.3.1.1 Vehicle design criteria
CODE TITLE DOCUMENT APPLICABILITY
OWNER
ISO 6780 Flat pallets for intercontinental ISO Applicable
materials handling — Principal document
dimensions and tolerances
ISO 6346 Freight containers — Coding, ISO Useful reference
identification and marking
ISO 8855 Road vehicles. Vehicle dynamics and ISO Useful reference
road-holding ability. Vocabulary
EN 15227 Railway applications - CEN Useful reference
Crashworthiness requirements for
railway vehicle bodies
CEN/TR 16251 Railway applications - CEN Useful reference
Environmental conditions - Design
guidance for rolling stock
EN 17168 Railway applications - Platform CEN Useful reference
barrier systems
EN 17261 Intelligent transport systems - CEN Useful reference
Automatic vehicle and equipment
identification - Intermodal goods
transport architecture and
terminology
EN 12663 Railway applications - Structural CEN Useful reference
requirements of railway vehicle
bodies
EN 14067-5 Railway applications - CEN Useful reference
Aerodynamics - Part 5:
Requirements and assessment
procedures for aerodynamics in
tunnels
EN 14752:2019+A1:2021 Railway applications - Bodyside CEN Useful reference
entrance systems for rolling stock
EN 15380-1 Railway applications - Designation CEN Useful reference
system for railway vehicles - Part 1:
General principles
EN 15380-2 Railway applications - Designation CEN Useful reference
system for railway vehicles - Part 2:
Product groups
EN 15380-3 Railway applications - Designation CEN Useful reference
system for railway vehicles - Part 3:
Designation of installation sites and
locations
EN 15380-4 Railway applications - Classification CEN Useful reference
system for railway vehicles - Part 4:
Function groups
EN 15380-5 Railway applications - Classification CEN Useful reference
system for railway vehicles - Part 5:
System Breakdown Structure (SBS)
EN 15663 2017 Railway applications - Vehicle CEN Useful reference
reference masses
prEN 17149-1 Railway applications — Strength CEN Useful reference
assessment on railway vehicle
structures - Part 1: General
prEN 17149-3 Railway applications — Strength CEN Useful reference
assessment of railway vehicle
structures — Part 3: Fatigue
strength assessment based on
cumulative damage
ISO 22752 Railway applications – ISO Not directly
Body side windows for railway applicable
rolling stock
CEN/TC256/ SC 2/WG 02 Railway applications – Bolting of CEN Not directly
Pending Number railway vehicles and components applicable
ASME PVHO-1 Safety Standard for Pressure Vessels American Useful reference
for Human Occupancy Society of
Mechanical
Engineers
QD 4.650CS Fuselage Skin Quality (FSQ) AIRBUS Not directly
Canada applicable
Directives, Regulations and related documents
EASA CS-25 Certification Specifications for Large European Useful reference
Aeroplanes Union Aviation
Initial airworthiness Safety Agency
FAA PART 25 Airworthiness Standards: Transport US Federal Useful reference
Category Airplanes Aviation
Administration
FAA PART 25.841 Airworthiness Standards: Transport US Federal Useful reference
Category Airplanes. Aviation
Pressurized cabins Administration
DOT-VNTSC-FAA-05–01 Operational Guidelines for US Department Useful reference
Spaceflight Pressure Vessels of
Transportation
-
Volpe National
Transportation
Systems
Center
5.3.1.2 Suspension and vibrations
CODE TITLE DOCUMENT APPLICABILITY
OWNER
ISO 2631-1 Mechanical vibration and shock—Evaluation ISO Applicable document
of human exposure to whole-body
vibration—Part 1: General requirements
ISO 2631-4 Mechanical vibration and shock—Evaluation ISO Applicable document
of human exposure to whole-body
t 4: Guidelines for the
vibration—Par
evaluation of the effects of vibration and
rotational motion on passenger and crew
EN 13802 Railway applications - Suspension CEN Useful reference
components - Hydraulic dampers
EN 13597 Railway applications - Rubber suspension CEN Useful reference
components - Rubber diaphragms for
pneumatic suspension springs
EN 13913 Railway applications - Rubber suspension CEN Useful reference
components - Elastomer-based mechanical
parts
EN 14817 Railway applications - Suspension CEN Useful reference
components - Air spring control elements
EN 15049 Railway applications - Suspension CEN Useful reference
components - Torsion bar, steel
ISO 22749-1 Railway applications - Suspension ISO Useful reference
components -
Part 1: Characteristics and test methods for
elastomer –mechanical parts
ISO 22749-2 Railway applications - Suspension ISO Useful reference
components -
Part 2: Approval procedure and quality
monitoring for elastomer –mechanical parts
5.3.1.3 General travel comfort and related systems
CODE TITLE DOCUMENT APPLICABILITY
OWNER
EN 12299 Railway applications - Ride comfort CEN Applicable
for passengers - Measurement and document
evaluation
EN 2245 Aerospace series - Pipelines for CEN Useful reference
liquids and gases - Definitions
EN 4697 Aerospace series - General and CEN Useful reference
installation requirements for
passenger seat fittings
CODE TITLE DOCUMENT APPLICABILITY
OWNER
EN 4723 Aerospace series - Standardized CEN Useful reference
measurement methods for comfort
and living space criteria for aircraft
passenger seats
EN 4726 Aerospace series - Acceptance CEN Useful reference
parameters of aesthetical
variations for all visible equipment
installed in aircraft cabins under all
contractual variations
ISO/PWI TS 5914 Railway Applications — ISO Useful reference
Interior Passive Safety
ISO/AWI 24491 Railway applications — ISO Useful reference
Passenger seats for heavy rail
rolling stock
EN 13129-1 Railway applications - Air CEN Useful reference
conditioning for main line rolling
stock - Comfort parameters and
type tests
EN 13272-1 Railway applications - Electrical CEN Useful reference
lighting for rolling stock in public
transport systems - Part 1: Heavy
rail
EN 13272-2 Railway applications - Electrical CEN Useful reference
lighting for rolling stock in public
transport systems - Part 2: Urban
rail
EN 14750-1 Railway applications - Air CEN Useful reference
conditioning for urban and
suburban rolling stock – Part 1:
Comfort parameters
EN 16334-1 Railway applications - Passenger CEN Useful reference
Alarm System - Part 1: System
requirements for mainline rail
EN 16334-2 Railway applications - Passenger CEN Useful reference
alarm system - Part 2: System
requirements for urban rail
EN 16362 Railway applications - Ground CEN Useful reference
based services - Water restocking
equipment
EN 16922 Railway applications - Ground CEN Useful reference
based services - Vehicle waste
water discharge equipment
ISO 19659-1 Railway applications—Heating, ISO Useful reference
ventilation and air condition
CODE TITLE DOCUMENT APPLICABILITY
OWNER
systems for rolling stock. Part 1:
Terms and definitions
ISO 19659-2 Railway applications—Heating, ISO Useful reference
ventilation and air condition
systems for rolling stock. Part 2:
Thermal comfort
ISO/DIS 19659-3 Railway applications—Heating, ISO Useful reference
ventilation and air condition
systems for rolling stock. Part 3:
Energy efficiency
ISO/TC269/SC2/AHG1 Railway applications – ISO Useful reference
Pending Number Luggage racks for heavy rail rolling
stock
CEN/TC256/ WG 43 Railway applications - Ground CEN Useful reference
Pending Number based services - Passenger rolling
stock hygiene equipment
EN 14813-1 Railway applications - Air CEN Not directly
applicable
conditioning of driving cabs - Part
1: Comfort parameters
EN 14813-2 Railway applications - Air CEN Not directly
conditioning for driving cabs - Part applicable
2: Type tests
ASHRAE 62.1 Ventilation for Acceptable Indoor American Useful reference
Air Quality Society of
Heating,
Refrigerating
and Air-
Conditioning
Engineers
5.3.1.4 Passengers with restricted mobility
CODE TITLE DOCUMENT APPLICABILITY
OWNER
EN 15684-1 Railway applications - Design for PRM CEN Applicable
use - General requirements - Part 1: document
Contrast
EN 15684-2 Railway applications - Design for PRM CEN Applicable
use - General requirements - Part 2: document
Information
EN 15684-3 Railway applications - Design for PRM CEN Applicable
use - General requirements - Part 3: document
Optical and friction characteristics
CODE TITLE DOCUMENT APPLICABILITY
OWNER
EN 16585-1 Railway applications - Design for PRM CEN Applicable
use - Equipment and components document
onboard rolling stock -
Part 1: Toilets
EN 16585-2 Railway applications - Design for PRM CEN Applicable
use - Equipment and components on document
board rolling stock -
Part 2: Elements for sitting, standing and
moving
EN 16585-3 Railway applications - Design for PRM CEN Applicable
use - Equipment and components on document
board rolling stock -
Part 3: Clearways and internal doors
EN 16586-1 Railway applications - Design for PRM CEN Applicable
use - Accessibility of persons with document
reduced mobility to rolling stock - Part 1:
Steps for acc
...