iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 16228-3:2014/oprA1:2019

(Amendment)

Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)

Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014.
This document does not repeat the requirements from EN 16228 1, but adds or replaces the requirements for application for horizontal directional drills.
A machine is considered a horizontal directional drill if it is designed to drill in a shallow arc for the installation of pipes, conduits, and cables and typically has a drill string entry angle of less than 45° relative to the operating surface of the earth.

Geräte für Bohr- und Gründungsarbeiten - Sicherheit - Teil 3: Geräte für das Gerichtete Horizontalbohrverfahren (HDD)

Geräte für Bohr- und Gründungsarbeiten — Sicherheit — Teil 3: Geräte für das gerichtete Horizontalbohrverfahren (HDD)

Machines de forage et de fondation - Sécurité - Partie 3 : Machines de forage horizontal dirigé (HDD)

Au 9e alinéa, remplacer le deuxième tiret par « - Partie 2 : Machines mobiles de forage de génie civil, de puits d’eau, d’exploration de sol, d’énergie géothermique dans le sol ou mélange roche et sol ».

Oprema za vrtanje in temeljenje - Varnost - 3. del: Oprema za vodoravno usmerjeno vrtanje (HDD) - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
24-Jul-2019
ICS
25.080.40 - Drilling machines
53.100 - Earth-moving machinery
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
I13 - Imaginarni 13
Current Stage
5020 - Formal vote (FV) (Adopted Project)
Start Date
14-Sep-2021
Due Date
02-Nov-2021
Completion Date
14-Sep-2021
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 16228-3:2014/FprA1 - Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)

Relations

Consolidated By
SIST EN 16228-3:2014+A1:2022 - Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
Effective Date
18-Jan-2023
Amends
SIST EN 16228-3:2014 - Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
Effective Date
09-Nov-2016
Consolidated By
SIST EN 16228-3:2014+A1:2022 - Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
Effective Date
19-Jan-2023
Consolidated By
SIST EN 16228-3:2014+A1:2022 - Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
Effective Date
03-Nov-2021

Buy Standard

EN 16228-3:2014/oprA1:2019EN 16228-3:2014/oprA1:2019
PreviousNext
Draft
EN 16228-3:2014/oprA1:2019
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16228-3:2014/oprA1:2019
01-julij-2019
Oprema za vrtanje in temeljenje - Varnost - 3. del: Oprema za vodoravno
usmerjeno vrtanje (HDD) - Dopolnilo A1
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling
equipment (HDD)
Geräte für Bohr- und Gründungsarbeiten - Sicherheit - Teil 3: Geräte für das Gerichtete
Horizontalbohrverfahren (HDD)
Machines de forage et de fondation - Sécurité - Partie 3 : Machines de forage horizontal
dirigé (HDD)
Ta slovenski standard je istoveten z: EN 16228-3:2014/prA1
ICS:
25.080.40 Vrtalniki Drilling machines
53.100 Stroji za zemeljska dela Earth-moving machinery
93.020 Zemeljska dela. Izkopavanja. Earthworks. Excavations.
Gradnja temeljev. Dela pod Foundation construction.
zemljo Underground works
SIST EN 16228-3:2014/oprA1:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 16228-3:2014/oprA1:2019

---------------------- Page: 2 ----------------------

SIST EN 16228-3:2014/oprA1:2019


DRAFT
EUROPEAN STANDARD
EN 16228-3:2014
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
May 2019
ICS 93.020
English Version

Drilling and foundation equipment - Safety - Part 3:
Horizontal directional drilling equipment (HDD)
Machines de forage et de fondation - Sécurité - Partie 3 Geräte für Bohr- und Gründungsarbeiten - Sicherheit -
: Machines de forage horizontal dirigé (HDD) Teil 3: Geräte für das Gerichtete
Horizontalbohrverfahren (HDD)
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 151.

This draft amendment A1, if approved, will modify the European Standard EN 16228-3:2014. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16228-3:2014/prA1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 16228-3:2014/oprA1:2019
EN 16228-3:2014/prA1:2019 (E)
Contents Page
European foreword . 3
1 Modification to the whole text . 4
2 Modification to Clause 4 “List of additional significant hazards” . 4
3 Modification to Subclause 5.1 “General” . 4
4 Modification to Subclause 5.2.1 “General” . 4
5 Modification to Subclause 5.2.2 “Ground pressure” . 4
6 Modification to Subclause 5.3.1 “Brakes for travelling “ . 4
7 Modification to Subclause 5.3.2 “Brakes for slewing” . 4
8 Modification to Subclause 5.4.1 “General” . 4
9 Modification to Subclause 5.4.2 “Roller and leaf chains” . 4
10 Modification to Subclause 5.6.1 “General” . 4
11 Modification to Subclause 5.7 “Access to operating positions, intervention and
servicing points” . 5
12 Modification to Subclause 5.8 “Retrieval, transportation, lifting and towing of
horizontal directional drills and their parts” . 5
13 Modification to Subclause 5.10.1 “General” . 5
14 Modification to Subclause 5.10.3 “Protective measures for stopping of rotation and
feed” . 5
15 Modification to Subclause 5.10.4 “Restricted operating mode” . 5
16 Modification to Subclause 5.11.2 “Warning devices” . 5
17 Modification to Subclause 5.12.1 “General” . 5
18 Modification to Subclause 5.14 “Drill frame extensions” . 5
19 Modification to Subclause 6.2 “Fitness for purpose testing” . 5
20 Modification to Subclause 7.2 “Operator’s manual” .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16228-3:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
EN 16228-3:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for horizontal directional drills.
A machine is considered a horizontal directional drill if it is designed to drill in a shallow arc for the installation of pipes, conduits, and cables and typically has a drill string entry angle of less than 45° relative to the operating surface of the earth.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-2:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-2:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering, "deleted text" when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014+A1:2021.
This document does not repeat the requirements from EN 16228 1:2014+A1:2021, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning and tunnelling;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   EN 16228-4:2014+A1:2021 covers machines with a rotary torque greater than 35 kNm.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.
The following machines are excluded from the scope of this document:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to prEN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry;
-   specialized mining machinery and equipment for opencast mining (e.g. rock drill rigs, blast hole drills) (under the scope of CEN/TC 196);
-   all underground mining machinery and equipment for the extraction of solid mineral substances (e. g. rock drill rigs, raise boring machines, shaft boring machines, mining auger boring machines, jumbos) as well as machinery and equipment for underground mine development (under the scope of CEN/TC 196);
-   core drilling machines on stand covered by EN 12348;
-   hand-held machines (in particular machines covered by ISO 11148-5).
This document is not applicable to mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering manufactured before the date of its publication.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-3:2014(Main)
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
EN 16228-3:2014

EN 16228-3, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-2:2014(Main)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-2:2014

EN 16228-2, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). In this document the general term “mobile drill rig” covers several different types of machines for use in: - civil engineering; - geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting); - water well drilling; - geothermal installations; - landfill drilling; - underpinning, tunnelling, mining and quarrying; - for use above ground as well as underground.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-2:2014/oprA1:2019(Amendment)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-2:2014/FprA1

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014.
This document does not repeat the requirements from EN 16228 1, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning, tunnelling, mining and quarrying;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   For machines with torque greater than 35 kNm see EN 16228-4 initially.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-3:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
EN 16228-3:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014+A1:2021.
This document does not repeat the requirements from EN 16228-1:2014+A1:2021, but adds or replaces the requirements for application for horizontal directional drills.
A machine is considered a horizontal directional drill if it is designed to drill in a shallow arc for the installation of pipes, conduits, and cables and typically has a drill string entry angle of less than 45° relative to the operating surface of the earth.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-2:2014+A1:2022(Main)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-2:2014+A1:2021

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering, "deleted text" when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014+A1:2021.
This document does not repeat the requirements from EN 16228 1:2014+A1:2021, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning and tunnelling;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   EN 16228-4:2014+A1:2021 covers machines with a rotary torque greater than 35 kNm.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.
The following machines are excluded from the scope of this document:
-   tunnelling machines, unshielded tunnel boring machines and rodless shaft boring machines for rock according to prEN 16191;
-   raise boring machines;
-   drill rigs used in oil and gas industry;
-   specialized mining machinery and equipment for opencast mining (e.g. rock drill rigs, blast hole drills) (under the scope of CEN/TC 196);
-   all underground mining machinery and equipment for the extraction of solid mineral substances (e. g. rock drill rigs, raise boring machines, shaft boring machines, mining auger boring machines, jumbos) as well as machinery and equipment for underground mine development (under the scope of CEN/TC 196);
-   core drilling machines on stand covered by EN 12348;
-   hand-held machines (in particular machines covered by ISO 11148-5).
This document is not applicable to mobile drill rigs for in soil or soil and rock mixture in civil and geotechnical engineering manufactured before the date of its publication.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-3:2014(Main)
Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)
EN 16228-3:2014

EN 16228-3, together with part 1, deals with all significant hazards for horizontal directional drilling equipment (HDD) when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228-1:2014.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-2:2014(Main)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-2:2014

EN 16228-2, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). In this document the general term “mobile drill rig” covers several different types of machines for use in: - civil engineering; - geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting); - water well drilling; - geothermal installations; - landfill drilling; - underpinning, tunnelling, mining and quarrying; - for use above ground as well as underground.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16228-2:2014/oprA1:2019(Amendment)
Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geotechnical engineering, quarrying and mining
EN 16228-2:2014/FprA1

This European Standard, together with part 1, deals with all significant hazards for mobile drill rigs for civil and geotechnical engineering, quarrying and mining when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4).
The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014.
This document does not repeat the requirements from EN 16228 1, but adds or replaces the requirements for application for mobile drill rigs.
In this document the general term "mobile drill rig" covers several different types of machines for use in:
-   civil engineering;
-   geotechnical engineering (including ground investigation, anchoring, soil nailing, mini-piling, ground stabilization, grouting);
-   water well drilling;
-   geothermal installations;
-   landfill drilling;
-   underpinning, tunnelling, mining and quarrying;
-   for use above ground as well as underground.
Typically, the process of drilling involves the addition of drill rods, tubes, casings or augers etc., normally threaded, as the borehole extends to depth.
NOTE 1   For machines with torque greater than 35 kNm see EN 16228-4 initially.
NOTE 2   The term "drill rigs" includes rigs with a separate power pack supplied by the rig manufacturer.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day