SIST EN IEC 60743:2013/A1:2026

SLOVENSKI STANDARD
01-maj-2026
Delo pod napetostjo - Izrazje za orodje, naprave in opremo - Dopolnilo A1 (IEC
60743:2013/AMD1:2026)
Live working - Terminology for tools, devices and equipment (IEC
60743:2013/AMD1:2026)
Arbeiten unter Spannung - Terminologie für Werkzeuge, Geräte und Ausrüstungen (IEC
60743:2013/AMD1:2026)
Travaux sous tension - Terminologie pour l'outillage, les dispositifs et les équipements
(IEC 60743:2013/AMD1:2026)
Ta slovenski standard je istoveten z: EN 60743:2013/A1:2026
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.260 Varstvo pred električnim Protection against electric
udarom. Delo pod napetostjo shock. Live working
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60743:2013/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM March 2026
ICS 29.140.20; 29.260.01
English Version
Live working - Terminology for tools, devices and equipment
(IEC 60743:2013/AMD1:2026)
Travaux sous tension - Terminologie pour l'outillage, les Arbeiten unter Spannung - Terminologie für Werkzeuge,
dispositifs et les équipements Geräte und Ausrüstungen
(IEC 60743:2013/AMD1:2026) (IEC 60743:2013/AMD1:2026)
This amendment A1 modifies the European Standard EN 60743:2013; it was approved by CENELEC on 2026-03-11. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60743:2013/A1:2026 E

European foreword
The text of document 78/1539/FDIS, future edition 3 of IEC 60743/AMD1, prepared by TC 78 "Live
working" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2027-03-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2029-03-31
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60743:2013/AMD1:2026 was approved by CENELEC as a
European Standard without any modification.

IEC 60743 ®
Edition 3.0 2026-02
INTERNATIONAL
STANDARD
AMENDMENT 1
Live working - Terminology for tools, devices and equipment

ICS 29.140.20; 29.260.01 ISBN 978-2-8327-1042-5

IEC 60743:2013-07/AMD1:2026-02(en)

IEC 60743:2013/AMD1:2026 © IEC 2026
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
Live working - Terminology for tools, devices and equipment

AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of rec
...