SIST EN ISO 8665-2:2024
(Main)Small craft - Power measurements and declarations - Part 2: Electric marine propulsion (ISO 8665-2:2024)
Small craft - Power measurements and declarations - Part 2: Electric marine propulsion (ISO 8665-2:2024)
Develop a Part 2 of 8665 to address electric propulsion devices for small craft.
Kleine Wasserfahrzeuge - Leistungsmessungen und ‑Leistungsangaben - Teil 2: Elektrischer Schiffsantrieb (ISO 8665-2:2024)
Dieses Dokument legt die Anforderungen für die Bestimmung der Leistung von elektrischen Schiffsantriebssystemen zum Zweck der Dokumentation und Prüfung der vom Hersteller erklärten (Bemessungs-)Leistung fest.
Dieses Dokument ist anwendbar auf elektrische Systeme, die für den Antrieb von Sportbooten und anderen kleinen Wasserfahrzeugen mit einer Rumpflänge von bis zu 24 m verwendet werden.
Petits navires - Mesurage et déclaration de la puissance - Partie 2: Propulsion électrique à usage marin (ISO 8665-2:2024)
Le présent document spécifie les exigences liées à la détermination de la puissance des systèmes de propulsion électrique à usage marin lors de la documentation et de la vérification de la puissance (nominale) déclarée publiée par le fabricant.
Le présent document s’applique aux systèmes électriques utilisés pour la propulsion de bateaux de plaisance et autres petits navires d’une longueur de coque maximale de 24 m.
Mala plovila - Merjenje moči in deklariranje - 2. del: Električni pogon plovil (ISO 8665-2:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8665-2:2024
01-september-2024
Mala plovila - Merjenje moči in deklariranje - 2. del: Električni pogon plovil (ISO
8665-2:2024)
Small craft - Power measurements and declarations - Part 2: Electric marine propulsion
(ISO 8665-2:2024)
Kleine Wasserfahrzeuge - Leistungsmessungen und ‑Leistungsangaben - Teil 2:
Elektrischer Schiffsantrieb (ISO 8665-2:2024)
Petits navires - Mesurage et déclaration de la puissance - Partie 2: Propulsion électrique
à usage marin (ISO 8665-2:2024)
Ta slovenski standard je istoveten z: EN ISO 8665-2:2024
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 Čolni Small craft
SIST EN ISO 8665-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8665-2:2024
---------------------- Page: 2 ----------------------
SIST EN ISO 8665-2:2024
EN ISO 8665-2
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2024
EUROPÄISCHE NORM
ICS 47.080
English Version
Small craft - Power measurements and declarations - Part
2: Electric marine propulsion (ISO 8665-2:2024)
Petits navires - Mesurage et déclaration de la puissance Kleine Wasserfahrzeuge - Leistungsmessungen und -
- Partie 2: Propulsion électrique à usage marin (ISO Leistungsangaben - Teil 2: Elektrischer Schiffsantrieb
8665-2:2024) (ISO 8665-2:2024)
This European Standard was approved by CEN on 17 May 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8665-2:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8665-2:2024
EN ISO 8665-2:2024 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8665-2:2024
EN ISO 8665-2:2024 (E)
European foreword
This document (EN ISO 8665-2:2024) has been prepared by Technical Committee ISO/TC 188 "Small
craft" in collaboration with Technical Committee CEN/TC 464 “Small Craft” the secretariat of which is
held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2024, and conflicting national standards
shall be withdrawn at the latest by December 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document is a new second part of ISO 8665 series on "Small craft -Power measurement and
declaration.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this Eu
...
SLOVENSKI STANDARD
oSIST prEN ISO 8665-2:2023
01-januar-2023
Mala plovila - Merjenje moči in deklariranje - 2. del: Električni pogon plovil (ISO/DIS
8665-2:2022)
Small craft - Power measurements and declarations - Part 2: Electric marine propulsion
(ISO/DIS 8665-2:2022)
Kleine Wasserfahrzeuge - Leistungsmessungen und ‑Leistungsangaben - Teil 2:
Elektrischer Schiffsantrieb (ISO/DIS 8665‑2:2022)
Petits navires - Mesurage et déclaration de la puissance - Partie 2: Propulsion électrique
à usage marin (ISO/DIS 8665-2:2022)
Ta slovenski standard je istoveten z: prEN ISO 8665-2
ICS:
47.020.20 Ladijski motorji Marine engines and
propulsion systems
47.080 Čolni Small craft
oSIST prEN ISO 8665-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 8665-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 8665-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8665-2
ISO/TC 188 Secretariat: SIS
Voting begins on: Voting terminates on:
2022-11-09 2023-02-01
Small craft — Power measurements and declarations —
Part 2:
Electric marine propulsion
ICS: 47.080
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8665-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 8665-2:2023
ISO/DIS 8665-2:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8665-2
ISO/TC 188 Secretariat: SIS
Voting begins on: Voting terminates on:
Small craft — Power measurements and declarations —
Part 2:
Electric marine propulsion
ICS: 47.080
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 8665-2:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 4 ----------------------
oSIST prEN ISO 8665-2:2023
ISO/DIS 8665-2:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.