SIST EN 16704-3:2017/kFprA1:2021

SLOVENSKI STANDARD
SIST EN 16704-3:2017/oprA1:2019
01-februar-2019
Železniške naprave - Zgornji ustroj proge - Zagotavljanje varnosti med delom na
progi - 3. del: Usposobljenost osebja za delo na progi ali ob njej - Dopolnilo A1
Railway applications - Track - Safety protection on the track during work - Part 3:
Competences for personnel related to work on or near tracks
Bahnanwendungen - Oberbau - Sicherungsmaßnahmen während Gleisbauarbeiten - Teil
3: Fachkenntnisse des Personals bei Arbeiten neben oder in Gleisen
Applications ferroviaires - Voie - Protection et sécurité durant des travaux sur la voie -
Partie 3 : Compétences du personnel liées au travail sur ou à proximité de la voie ferrée
Ta slovenski standard je istoveten z: EN 16704-3:2016/prA1
ICS:
03.100.30 Vodenje ljudi Management of human
resources
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
93.100 Gradnja železnic Construction of railways
SIST EN 16704-3:2017/oprA1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 16704-3:2017/oprA1:2019

---------------------- Page: 2 ----------------------

SIST EN 16704-3:2017/oprA1:2019


DRAFT
EUROPEAN STANDARD
EN 16704-3:2016
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
November 2018
ICS 93.100
English Version

Railway applications - Track - Safety protection on the
track during work - Part 3: Competences for personnel
related to work on or near tracks
Applications ferroviaires - Voie - Protection et sécurité Bahnanwendungen - Oberbau - Sicherungsmaßnahmen
durant des travaux sur la voie - Partie 3 : Compétences während Gleisbauarbeiten - Teil 3: Fachkenntnisse des
du personnel liées au travail sur ou à proximité de la Personals bei Arbeiten neben oder in Gleisen
voie ferrée
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 16704-3:2016. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16704-3:2016/prA1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 16704-3:2017/oprA1:2019
EN 16704-3:2016/prA1:2018 (E)
Contents Page
European foreword .
...