iTeh Standards logo
EURUSD
Your shopping cart is empty.
ISO

ISO 11881:1999/Cor 1:1999

(Corrigendum)

Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1

Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1

Corrosion des métaux et alliages — Essai de corrosion feuilletante des alliages d'aluminium — Rectificatif technique 1

General Information

Status
Published
Publication Date
18-Aug-1999
ICS
77.060 - Corrosion of metals
Technical Committee
ISO/TC 156 - Corrosion of metals and alloys
Drafting Committee
ISO/TC 156/WG 5 - Intergranular corrosion
Current Stage
6060 - International Standard published
Start Date
19-Aug-1999
Completion Date
13-Dec-2025
Ref Project

Relations

Corrects
ISO 11881:1999 - Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
Effective Date
06-Jun-2022
Child
ISO 11881:1999 - Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
Effective Date
15-Apr-2008
ISO 11881:1999/Cor 1:1999 - Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1 Released:8/19/1999ISO 11881:1999/Cor 1:1999 - Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1 Released:8/19/1999
PreviousNext
Standard
ISO 11881:1999/Cor 1:1999 - Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1 Released:8/19/1999
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 11881:1999/Cor 1:1999 - Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1 Released:8/19/1999ISO 11881:1999/Cor 1:1999 - Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1 Released:8/19/1999
PreviousNext
Standard
ISO 11881:1999/Cor 1:1999 - Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1 Released:8/19/1999
French language
1 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


INTERNATIONAL STANDARD ISO 11881:1999
TECHNICAL CORRIGENDUM 1
A
Published 1999-07-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • ÌÅÆÄÓÍÀÐÎÄÍÀß ÎÐÃÀÍÈÇÀÖÈß ÏÎ ÑÒÀÍÄÀÐÒÈÇÀÖÈÈ • ORGANISATION INTERNATIONALE DE NORMALISATION
Corrosion of metals and alloys — Exfoliation corrosion
testing of aluminium alloys
TECHNICAL CORRIGENDUM 1
Corrosion des métaux et alliages — Essai de corrosion feuilletante des alliages d'aluminium
RECTIFICATIF TECHNIQUE 1
Technical Corrigendum 1 to International Standard ISO 11881:1999 was prepared by Technical Committee
ISO/TC 156, Corrosion of metals and alloys.
...


NORME INTERNATIONALE ISO 11881:1999
RECTIFICATIF TECHNIQUE 1
A
Publié 1999-07-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • ÌÅÆÄÓÍÀÐÎÄÍÀß ÎÐÃÀÍÈÇÀÖÈß ÏÎ ÑÒÀÍÄÀÐÒÈÇÀÖÈÈ • ORGANISATION INTERNATIONALE DE NORMALISATION
Corrosion des métaux et alliages — Essai de corrosion
feuilletante des alliages d'aluminium
RECTIFICATIF TECHNIQUE 1
Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
TECHNICAL CORRIGENDUM 1
Le Rectificatif technique 1 à la Norme internationale ISO 11881:1999 a été élaboré par le comité technique
ISO/TC 156, Corrosion des métaux et alliages.

Page 5
Supprimer le numéro de paragraphe 9.1.1.
Supprimer le numéro de paragraphe 9.1.2;
à la troisième ligne du paragraphe 9.3, rempla
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

ISO
ISO/TR 22861:2025(Main)
Guidance on marine environment zonation for steel corrosion embedded in concrete

This document sets out a methodology for the exposure zone division of reinforced concrete structures in marine environments, based on a test procedure that is provided in this document. This document is applicable to the division of coastal and offshore marine environment areas. It is not applicable to typhoon, strong tide and other marine environment areas. Annexes B, C, and D provide examples of marine environment zonation to illustrate the methodology.

  • Technical report
    17 pages
    English language
    sale 15% off
ISO
ISO 9350:2025(Main)
Corrosion of metals and alloys — Testing method of corrosion resistance for hafnium at high temperature and pressure

This document specifies: a) the determination of mass gain; b) the surface inspection of products of hafnium when corrosion tested in water at 360 °C. This document is applicable to hot-work or cold-work hafnium rods, wires, plates, sheets and strips. This method has been widely used in the development of hafnium products. It is applicable for use in its entirety to the extent specified for a product acceptance test, rather than merely a means of assessing performance in service of pressurized water reactor.

  • Standard
    11 pages
    English language
    sale 15% off
ISO
ISO/PAS 5929:2025(Main)
Corrosion of metals and alloys — Test and evaluation method for the corrosion of steel bar embedded in concrete structure exposed to total corrosion zones in marine environments

This document specifies the apparatus, materials, specimen preparation, procedures, results and reports for testing the corrosion test of steel bars. This document includes an evaluation method. This document applies to reinforced concrete structures exposed simultaneously to atmospheric, splash, tidal, immersion, and buried zones in marine environments. NOTE Annex A provides test apparatus examples. Annex B illustrates test results.

  • Technical specification
    22 pages
    English language
    sale 15% off
ISO
ISO 16701:2025(Main)
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution

This document specifies an atmospheric accelerated test procedure in two closely related variants that contain intermittent salt exposure combined with dynamic humidity patterns: variant A at constant dew point and variant B at constant temperature. These variants are used in assessing the corrosion resistance of metals in environments where there is a significant influence of chloride ions, mainly as sodium chloride from, for example, winter road de-icing salt. The results obtained do not permit far-reaching conclusions on the corrosion resistance of the tested metallic material under the whole range of environmental conditions in which it can be used. Nevertheless, the method provides information on the relative corrosion resistance of a material exposed to a salt-contaminated environment with varying humidity conditions. The two accelerated laboratory corrosion test variants are applicable to: — metals and their alloys (ferrous and non-ferrous); — metallic coatings; — chemical conversion coatings; — organic coating on metals; — a combination of materials and coatings that include galvanic interactions and/or crevice conditions. NOTE 1 If testing low-alloy stainless steels according to this document, especially austenitic grades, there is a risk of exaggerated pitting, which is not representative of most service environments. NOTE 2 This document is not suitable for testing of wax and oil-based rust protection agents, due to the constantly elevated temperature condition of the test. This document also specifies requirements on the test equipment and contains detailed procedures for quality control, including recommended instrumentation. This document does not specify the dimensions of the tests specimens, the exposure period to be used for a particular product, or the interpretation of the results. Such details are provided in the appropriate product specifications.

  • Standard
    38 pages
    English language
    sale 15% off
  • Standard
    42 pages
    French language
    sale 15% off
ISO
ISO 26146:2025(Main)
Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments

This document specifies the examination of samples that have been exposed to corrosive environments at high temperatures. This document specifies the classification, identification and thickness measurement of the corrosion layer that forms during exposure to corrosive environments at high temperatures.

  • Standard
    10 pages
    English language
    sale 15% off
ISO
ISO 21207:2025(Main)
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying

This document specifies two accelerated corrosion test methods. These methods assess the corrosion resistance of products containing copper in environments where there is a significant influence of chloride ions, mainly as sodium chloride from a marine source or winter road de-icing salt, as well as the influence of corrosion-promoting gases from industrial or traffic air pollution. This document specifies both the test apparatus and test procedures to be used in executing the accelerated corrosion tests. The methods are especially suitable for assessing the corrosion resistance of sensitive products with metals, e.g. electronic components, used in traffic and industrial environments.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    French language
    sale 15% off
ISO
ISO 8407:2021/Amd 1:2025(Amendment)
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens — Amendment 1
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
ISO
ISO 9351:2025(Main)
Galvanic anodes for cathodic protection in seawater and saline sediments

This document defines requirements and gives recommendations for the chemical composition, electrochemical properties, physical tolerances and test and inspection procedures for cast galvanic anodes of aluminium, magnesium and zinc-based alloys for cathodic protection in seawater, saline sediment and brackish water. Information on salinity ranges can be found in Annex A. The requirements and recommendations of this document can be applied to any available anode shape for cast anodes, e.g. trapezoid, circular, half-spherical cross sections, bracelet type. Whilst other metals, such as soft iron, can be used as galvanic anode material to protect more noble metals than iron and steel, these are not covered in this document.

  • Standard
    41 pages
    English language
    sale 15% off
  • Standard
    45 pages
    French language
    sale 15% off
ISO
ISO 8044:2024(Main)
Corrosion of metals and alloys — Vocabulary

This document defines terms relating to corrosion that are widely used in modern science and technology. In addition, some definitions are supplemented with short explanations. Throughout the document, International Union of Pure and Applied Chemistry rules for electrode potential signs are applied. The term “metal” is also used to include alloys and other metallic materials. Terms and definitions related to the inorganic surface treatment of metals are given in ISO 2080.

  • Standard
    23 pages
    English language
    sale 15% off
  • Standard
    24 pages
    French language
    sale 15% off
ISO
ISO 16784-1:2024(Main)
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines and requirements for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems

This document specifies general requirements and parameters for the pilot test evaluation of corrosion and scaling control additives in open recirculating cooling water systems. This document covers parameters including test unit design, operation, water quality and contamination. It also covers the design and operation of pilot test devices as well as parameters to be evaluated in pilot test units. This document covers the criteria that are used in pilot scale testing programmes for selecting water treatment programmes for specific recirculating cooling water systems. This document is only applicable to open recirculating cooling water systems. It does not apply to closed cooling systems and once-through cooling water systems. This document applies only to systems that incorporate shell and tube heat exchangers with standard uncoated smooth tubes and cooling water on the tube side. This document does not apply to heat exchangers with shell-side water, plate and frame and/or spiral heat exchangers and other heat exchange devices. However, when the test conditions are properly set up to model the surface temperature and shear stress in more complex heat transfer devices, the test results can predict the results of operating heat exchangers of that design. The test criteria established in this document are not intended to govern the type of bench and pilot scale testing normally carried out by water treatment companies as part of their proprietary product development programmes. However, water treatment companies can choose to use the criteria in this document as guidelines in the development of their own product development test procedures.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off