ISO 567:1995

INTERNATIONAL ISO
567
STANDARD
Second edition
1995-07-01
Coke - Determination of bulk density in a
small Container
- Dktermina tion de Ia masse volumique en vr-ac dans un rhcipien t
Coke
de petites dimensions
Reference number
ISO 567: 1995(E)

---------------------- Page: 1 ----------------------
ISO 567:1995(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing international Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 567 was prepared by Technical Committee
lSO/TC 27, Solid mineral fuels, Subcommittee SC 3, Coke.
This second edition cancels and replaces the first edition (ISO 567:1974),
which has been technically revised.
0 ISO 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------
0 ISO
ISO 567:1995(E)
Introduction
The bulk density of coke depends upon its physical characteristics, e.g.
apparent relative density, shape and size of the coke particles, and upon
the dimensions of the Container. The Container specified in this Inter-
national Standard has a capacity of 0,2 m3. The determination of bulk
density of coke in a large Container is described in ISO 1013.
. . .
Ill

---------------------- Page: 3 ----------------------
This page intentionally left blank

---------------------- Page: 4 ----------------------
INTERNATIONAL STANDARD 0 ISO ISO 567:1995(E)
- Determination of bulk density in a small
Coke
Container
4 Principle
1 Scope
This International Standard specifies a method for the A weighed Container of known volume is filled with
coke and the increase in mass is determined.
determination of the bulk density of coke in a cubical
Container of capacity 0,2 m3. lt is applicable to coke
with a nominal top size not greater than 125 mm.
5 Apparatus
5.1 Cubical Container, of capacity 0,200 m3 and
2 Normative references
internal dimension 585 mm, with a smooth inner sur-
face, rigidly constructed and fitted with handles.
The following Standards contain provisions which,
through reference in this text, constitute provisions
5.2 Weighing machine, preferably of the platform
of this International Standard. At the time of publi-
type, of maximum capacity 300 kg and sufficiently
cation, the editions indicated were valid. All Standards
accurate that the weighing error does not exceed
are subject to revision, and Parties to agreements
0,l % of the maximum load or 250 g, whi
...